Car head unit after installation,DVD GPS navigation system of 2003-2010 VW Touareg.
Many facts shows that people are seeking for more pleasure and entertainments from busy life,for we need to free ourselves especially when we are living rapid-speed life.Many people are more willing to buy a new car because it will bring them much convenience and entertainments.If you are one owner of 2003-2010 VW Touareg,this article will show general steps which is about 2003-2010 VW Touareg DVD navigation system installation.
Before we talk about how to remove original CD player and install new one,we can have a look at above image first and make a comparison between your car stereo with it,and judge if the dashboards of them are same.If they are in same scale.it shows that this stereo radio can also be installed in your car.
Most of you may have no idea about how to use this stereo,here is a video for you which will show you detailed operations:
Actually this process is not difficult or complex,but easy doesn’t mean that we have no need to attention anything,please turn off all affairs of your car to ensure security.And you need to note whether dvd player enters heat protection mode when your car has operated at very fast speed for a long time or when you feel the temperature of the unit is very high.
If you have decided to install VW Touareg navigation radio for your beloved car,you can have a good look at the following VW Touareg radio installation guide and operate it step by step.
1.Factory dashboard of 2003-2010 VW Touareg
2.Make four small levers inserted in the gap of radio
3.Make them tight into the gap and then remove CD player by pulling off the levers
4.Use a pry tool like the picture show to fasten lever and then you can remove four levers
5.Unplug this big cable
6.Loosen this screw with a small special screwdriver and make most fine wire connected to it
7.After that get out inner wire and take out a blue one and then plug it into white one of new unit,with insert the other white one into blue one’s original place
8.Plug it to right place,sort wire in and turn on new radio and check whether all functions can work well
Installation steps for VW Touareg GPS bluetooth dvd player with sat nav system is over here.Before you begin the work,you should be careful when you are making cables connection and make sure all antennas must be connected to right positions.
Next, slide the stereo into dashboarda and then plug the negative cable to the original wiring harness as the steps show. Turn on new unit and check whether all functions in the unit can work well.If it doesn’t,check the wiring connections again or contact with the technicians from the dealer for help,or you can visit some websites which can help you know better about new stereo, for example: http://www.seicane.com/all-in-one-gps-radio-stereo-replacement-for-2003-2010-vw-volkswagen-touareg-with-3d-navigation-hd-touch-screen-cd-dvd-player-bluetooth-dvb-t-tv-steering-wheel-control-aux-ipod-iphone-c042 .