If you are not satisfied with your factory radio since its GPS function is not accurate and advanced enough, you can consider replace it with a brand new multifunctional car radio.If you own a and plan to upgrade your factory radio for getting access advanced GPS function and other modern features, then you can carefully read the following 2006 2007 2008 2009 2010-2012 VW Volkswagen Magotan car radio installation steps. Wish these steps can be helpful for you to some degree.
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006 2007 2008 2009 2010-2012 VW Volkswagen Magotan car radio installation steps
1. Remove the top panel with a lever.
2. Disconnect the connector at the back of the panel.
3. Unscrew the screw with a screwdriver.
4. Remove the metal sheet on the top with your hands.
5. Unscrew two screws circled in red shown as follows under the metal sheet.
6. Remove the air conditioner vent with your hands.
7. Unscrew two screws under the vent with a screwdriver.
8. Remove the panel on the original car radio.
9. Unscrew four screws holding the original car radio with a screwdriver.
10. Take the original car radio out of the dash.
11. Disconnect all the connectors at the back of the original car radio.
12. Check all the accessories for the new Seicane car radio.
13. Connect the harnesses to the back of the new Seicane car radio.
14. Connect the Seicane car radio to your original car radio’s plugs.
15. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
16. Put the new Seicane car radio into the dash.
17. Put everything into their original place.
Wish you can learn something useful from the above installation instruction. If you meet any problems you don’t know how to deal with, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio. Anyway, before installation, firstly you have to pick an ideal car radio. If you have no ideas, you can refer to the following link which is a remarkable 2006 2007 2008 2009 2010-2012 VW Volkswagen Magotan car radio from Seicane. For more details, please click:
This car radio’s operation system has been upgraded to the advanced and stable Android 7.1 version and it has a powerful quad-core CPU processor as well as 2GB RAM. Besides, integrated with a wide range of practical and entertainment features, this car radio can be regarded as the best replacement for your factory radio.
The worldwide real-time GPS navigation system is specially built in this unit, so you can easily know your current locations and find the most suitable way to reach your desired destinations according to turn-by-turn directions and voice prompts.
Besides, thanks to the wireless Bluetooth technology, this unit enables you to dial, answer, reject and mute hands-free phone calls as well as streaming music from your mobile phone and listen to it as long as you synchronize your Bluetooth-enabled mobile phone with this car radio, which bring you a lot of convenience and enjoyment.
If you like this unit, just add it to your shopping cart. Good luck to you!