http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

Category Archives: Toyota car DVD

How to install a 2001 2002-2011 Toyota Hilux Radio with Touch Screen bluetooth dvd

Nowadays, Toyota Hilux is a pretty good choice for most of us. But the original radio of it has few functions. So, do you want to have a high quality driving life? More and more Toyota Hilux owners upgrade their factory radio to touch screen DVD player. Aftermarket Toyota Hilux Radio is a good choice for most of us. Here are some professional instructions of Toyota Hilux Radio installation. But if you didn’t install a radio before, you’d better do it with the help of a professional technician in case of some irreparable damage is being made.

Before installation, look at the picture of Seicane 2001-2011 Toyota Hilux Radio after installation.

2001-2011 TOYOTA HILUX Radio after installation

2001-2011 TOYOTA HILUX Radio after installation

If you have the same dashboard with the picture shows, you can follow the instructions below.

 

 

Precautions before installation:

1.Before you begin any work, remember to disconnect negative power cable to avoid danger

2.Please turn off your car series include the radio unit and park your car well.

3.Before connecting, please make sure the ignition is off to avoid short circuit and connect the yellow and res cable at last.

 

2001-2011 Toyota Hilux Radio installation

1)First remove two trim panels at each side of center console and set it aside.

2001-2011 TOYOTA HILUX Radio installation step 1

2001-2011 TOYOTA HILUX Radio installation step 1

2)Remove the top panel and set it aside.

2001-2011 TOYOTA HILUX Radio installation step 2

2001-2011 TOYOTA HILUX Radio installation step 2

3)Remove 4 screws holding the unit with a Phillips screwdriver.

2001-2011 TOYOTA HILUX Radio installation step 3

2001-2011 TOYOTA HILUX Radio installation step 3

4)Gently take out the panel on the radio interface.

2001-2011 TOYOTA HILUX Radio installation step 4

2001-2011 TOYOTA HILUX Radio installation step 4

5)Then take out the radio and disconnect cables at back of it.

2001-2011 TOYOTA HILUX Radio installation step 5

2001-2011 TOYOTA HILUX Radio installation step 5

6)Connect the cables on the new head unit as the user manual shows and place them well.

7)Put the new head unit into the dash.

8)Turn on the new head unit and have a comprehensive check if it works well.

9)Install 4 screws back to their original position.

10)Check whether the unit is working without problem.

11)If everything is OK, make trim panel back on your new Seicane radio.

 

By the way, you should make sure whether the aftermarket radio fits your car before installation, and here is a good aftermarket radio of Seicane which fits Toyota Hilux well:

http://www.seicane.com/seicane-s126002-2-din-android-4-4-4-radio-navigation-system-for-2001-2011-toyota-hilux-with-800-480-hd-touch-screen-cd-dvd-player-bluetooth-wifi-3g-mirror-link-obd2-steering-wheel-control-usb-sd

This Seicane Toyota Hilux Radio can be a good choice for you. It has intelligent pure android 4.4.4 operation system and 6.2 inch HD 800*480 multi-touch screen.

This 2 din car dvd player can perfectly replace the factory radio/CD player of 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 TOYOTA HILUX. As a new modern multimedia unit, it comes with not only navigation system and bluetooth functionality, but also a massive entertainment features to make your journey be filled with fun and joy. With many designable elements, you are also able to DIY the background, the menu icons.

Posted in Toyota car DVD. Tagged with .

How to remove and install a 2000 2001-2006 Toyota Corolla Radio

In order to have a better in-car environment, more and more Toyota Corolla owners upgrade their factory radio to touch screen DVD player. Aftermarket Toyota Corolla Radio is a awesome choice for most of us. Here are some professional instructions of Toyota Corolla Radio installation. But if you didn’t install a radio before, you’d better do it with the help of a professional technician in case of some irreparable damage is being made.

Here is the picture of Seicane 2000-2006 Toyota Corolla Radio after installation.

2000-2006 TOYOTA Corolla  Radio after installation

2000-2006 TOYOTA Corolla Radio after installation

If you have the same dashboard with the picture shows, you can follow the instructions below.

 

Precautions before installation:

1.Before you begin any work, remember to disconnect negative power cable to avoid danger

2.Please turn off your car series include the radio unit and park your car well.

3.Before connecting, please make sure the ignition is off to avoid short circuit and connect the yellow and res cable at last.

 

2000-2006 Toyota Corolla Radio installation

1)First remove two trim panels at each side of center console and set it aside.

2000-2006 TOYOTA Corolla  Radio installation step 1

2000-2006 TOYOTA Corolla Radio installation step 1

2)Remove the top panel and set it aside.

2000-2006 TOYOTA Corolla  Radio installation step 2

2000-2006 TOYOTA Corolla Radio installation step 2

3)Remove 4 screws holding the unit with a Phillips screwdriver.

2000-2006 TOYOTA Corolla  Radio installation step 3

2000-2006 TOYOTA Corolla Radio installation step 3

4)Gently take out the panel on the radio interface.

2000-2006 TOYOTA Corolla  Radio installation step 4

2000-2006 TOYOTA Corolla Radio installation step 4

5)Then take out the radio and disconnect cables at back of it.

2000-2006 TOYOTA Corolla  Radio installation step 5

2000-2006 TOYOTA Corolla Radio installation step 5

6)Connect the cables on the new head unit as the user manual shows and place them well.

7)Put the new head unit into the dash.

8)Turn on the new head unit and have a comprehensive check if it works well.

9)Install 4 screws back to their original position.

10)Check whether the unit is working without problem.

11)If everything is OK, make trim panel back on your new Seicane radio.

 

By the way, you should make sure whether the aftermarket radio fits your car before installation, and here is a good aftermarket radio of Seicane which fits Toyota Corolla well:

http://www.seicane.com/seicane-s126002-android-4-4-4-dvd-player-2000-2006-toyota-corolla-radio-upgrade-with-bluetooth-gps-navigation-head-unit-800-480-touch-screen-3g-wifi-mirror-link-aux-steering-wheel-control-rearview-camera-1080p-video

This Seicane Toyota Corolla Radio can be a good choice for you. It has intelligent pure android 4.4.4 operation system and 6.2 inch HD 800*480 multi-touch screen.

This in dash car DVD player features a useful and latest GPS system and the advanced bluetooth technology for easy wireless pairing with enabled devices to make or receive hands-free calls and enjoy streaming music. The ability of USB and an SD card slot are also provided for you for more portable devices to let you have an enjoyable experience while driving. The installation is quite easy and it is just plug and play. No wire needs to be modified or cut for the simple installation.

 

And now, can you install the new Toyota Corolla Radio by yourself? Good luck to you!

Posted in Toyota car DVD. Tagged with .

How to install 2012 Toyota Hilux Radio with DVD navigation system

As we all know, install a new aftermarket radio is a very popular trend now. And it just like change a cell phone. Actually most of car radio are largely identical but with differences. Therefore, if your car’s dashboard looks alike this one as the picture shows, it means that it’s also suitable for your car. Before we begin this article,if you are the owner of 2012 Toyota Hilux but you hold your car’s radio is obsoleted and you want to replace a more advanced one, then it’s a right choice for you to read this essay. For that you will see detailed operation steps on how to remove 2012 Toyota Hilux radio here, which may let you not need to ask someone who are professional for help but do it by yourself.

2012 Toyota Hilux Radio after installation

2012 Toyota Hilux Radio after installation

If you are looking for a better aftermarket Toyota Hilux radio to instead of your original radio, I have a good suggestion:

http://www.seicane.com/2012-toyota-hilux-android-gps-radio-dvd-player-bluetooth-with-mirror-link-hd-touch-screen-obd-dvr-rearview-camera-tv-usb-sd-3g-wifi-s166230

 

If you want to have improve your quality of car life, this aftermarket radio can be a good choice for you. It has intelligent pure android 4.4.4 operation system and 6.2 inch HD 1024*600 multi-touch screen and supports dual-screen display for the highest resolution of 2048*1536.

You can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet, download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, Gmail etc. And it is your perfect road companion.

 

2012 Toyota Hilux Radio installation

1·First remove the negative cable from the battery.

2·Then return to the inside of the Toyota Hilux, pull three knobs out and set them aside.

 

2012 Toyota Hilux Radio installation step 1

2012 Toyota Hilux Radio installation step 1

3·Remove the screw in the center knob with a Phillips screwdriver.

2012 Toyota Hilux Radio installation step 2

2012 Toyota Hilux Radio installation step 2

4·Pull out the trim panel with medium force by your hands.

2012 Toyota Hilux Radio installation step 3

2012 Toyota Hilux Radio installation step 3

5·Unplug one connector behind the trim panel.

2012 Toyota Hilux Radio installation step 4

2012 Toyota Hilux Radio installation step 4

6·Using a Phillips screwdriver remove two screws as the picture shows.

2012 Toyota Hilux Radio installation step 5

2012 Toyota Hilux Radio installation step 5

7·Unscrew four 10mm bolts holding the radio in place.

2012 Toyota Hilux Radio installation step 6

2012 Toyota Hilux Radio installation step 6

8·When the screws are out, pull the radio out of the dash.

2012 Toyota Hilux Radio installation step 7

2012 Toyota Hilux Radio installation step 7

9·Disconnecting the harnesses behind the factory radio.

2012 Toyota Hilux Radio installation step 8

2012 Toyota Hilux Radio installation step 8

10·Make antennas and cables connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect whole procedure.

11·After finishing connections,turn on new radio and check your new unit, I hope that you can enjoy your new audio system, this is the whole installation process.

 

 

Toyota Hilux Radio is installed now. And there are some attentions about radio usage and maintance for you:

 

1.After you have installed a new unit successfully,please do not be so excited that you stare at it or pay most attention on it when you are driving with it,it’s very dangerous.

2.If you meet raining days with high humidity when you are driving, the moisture may gather on your head unit,you should pay attention to it for it will probably lead to DVD player’s unproper work.

3.Please try to make touch screen as clean as possible, do not sprinkle any liquid on the stereo if you hope it can be used longer and better.

Posted in Toyota car DVD. Tagged with .

How to remove and install 2009-2013 Toyota Sienna Radio navigation system with IPOD aux

The Toyota Sienna is a family minivan first produced by Toyota in 1998 and renowned for high reliability; it is still in production as of now. The Toyota Sienna can develop chronic radio problems, however, we can remove it and install a new aftermarket Toyota Sienna Radio to aviod these problems.Look at this image below, if your car have the same dashboard with it. There are some instructions of how to install a new radio.

2009-2013 Toyota Sienna dashboard

2009-2013 Toyota Sienna dashboard

2009-2013 Toyota Sienna radio removal

(1)Open the instrument box. See where the hands are. Just pull that brown panel out in the middle first.

2009-2013 Toyota Sienna Radio removal step 1

2009-2013 Toyota Sienna Radio removal step 1

(2) Now carefully pull it on both sides.

2009-2013 Toyota Sienna Radio removal step 2

2009-2013 Toyota Sienna Radio removal step 2

(3) When it is in your hands disconnect the harness.

2009-2013 Toyota Sienna Radio removal step 3

2009-2013 Toyota Sienna Radio removal step 3

(4) See where the hands are. Pull the panel around the gear switcher.

2009-2013 Toyota Sienna Radio removal step 4

2009-2013 Toyota Sienna Radio removal step 4

(5) To take it out you will need to remove the gear switcher handle.

2009-2013 Toyota Sienna Radio removal step 5

2009-2013 Toyota Sienna Radio removal step 5

(6) Twist it counter-clockwise. Use power of your hands to start the move.

2009-2013 Toyota Sienna Radio removal step 6

2009-2013 Toyota Sienna Radio removal step 6

(7) See where the hands are. Pull it to remove the A/C controls panel.

2009-2013 Toyota Sienna Radio removal step 7

2009-2013 Toyota Sienna Radio removal step 7

(8) we will need a wrench to remove 4 bolts. Actually I used magnet tool also. That way it is easier not to drop them somewhere inside.

2009-2013 Toyota Sienna Radio removal step 8

2009-2013 Toyota Sienna Radio removal step 8

(9) See where the hands are. Pull the radio and air registers out.

2009-2013 Toyota Sienna Radio removal step 9

2009-2013 Toyota Sienna Radio removal step 9

(10) And here we go. It is in hands.

2009-2013 Toyota Sienna Radio removal step 10

2009-2013 Toyota Sienna Radio removal step 10

With these steps above, we can remove the Toyota Sienna Radio easily. After few minutes rest, we can install the new radio immediately.

2009-2013 Toyota Sienna radio installation

(1) Make antennas and cables connected step by step as installation instructions show,and you should be very careful when you are doing this for it will affect whole procedure.

(2) Connected the new radio to your Toyota Sienna, you should check whether your connections are correct, the new unit is in right position,and you’d better have a tidy for the cables.

(3)Firm four removed screws that are put aside,then make trim panel back on your new unit

 

Arrangement for wiring must be reasonable during your installation process. Usually, the space for installation is limited. You’d better reduce unnecessary wirings’ space to make the dvd gps easier to install and function.The cables and wires of car and new radio must be routed properly to avoid touching any moving parts,include steering wheel column acceleration pedal and brake pedal. All antennas must be bonded properly to against any loose during driving.

 

By the way, if you don’t know which unit is better. I’d like to introduce a good one to you:

http://www.seicane.com/seicane-s128006-quad-core-android-4-4-4-2009-2013-toyota-sienna-aftermarket-car-stereo-radio-dvd-gps-navigation-system-with-3g-wifi-bluetooth-music-mirror-link-obd2-usb-sd-1024-600-multi-touch-capacitive-screen-hd-1080p-video-steering-wheel

This unit has Quad-core Android 4.4.4 operation system and 8 inch HD 1024*600 multi-touch screen with smooth operation, you can use high speed 3G&WiFi internet. You can download any applications in the android market for access to games, Skype, MSN, YouTube and so on. You can also use 3D navigation maps. Isn’t it awesome?

 

Wish you can learn something from this blog, have fun with your Toyota Sienna Radio every day.

Posted in Toyota car DVD. Tagged with .

Specific installation instructions for 2012 2013 Toyota Yaris navigation dvd with BT music 3G WIFI

Here is car stereo autoradio after installation,navigation dvd sound system with bluetooth music of 2012 2013 Toyota Yaris.This is one of the stereos which can be installed in Toyota Yaris of 2012 2013.

car stereo autoradio after installation,navigation dvd sound system with bluetooth music of 2012 2013 Toyota Yaris

car stereo autoradio after installation,navigation dvd sound system with bluetooth music of 2012 2013 Toyota Yaris

From this picture we can find that the appearance and functions which are showed on touch screen have all been changed,and it seems to be very wonderful to drive a car with a this kind of stereo.

You may take the stereo upgrade into account if your sound system of 2012 2013 Toyota Yaris is still the factory one which is operated by control buttons.It won’t be complex to achieve it or even need to buy another car with advanced stereo,if you want to do it yourself,then knowing specific installation instructions for 2012 2013 Toyota Yaris navigation dvd with BT music 3G WIFI is very necessary.

Don’t worry,it’s not hard to achieve this goal.First of all,choose one suitable stereo for your car and then patiently and carefully read the following installation guide.

2012 2013 Toyota Yaris cd radio removal and navigation dvd installation:

You can prepare some tools which can be useful before installation,such as a lever or other pry tool and screwdriver,and you’d better ask someone beside you that can make your work more smoothly.

1.Pry off the trim of radio

Pry off the trim of radio

Pry off the trim of radio

2.Take four mounting screws out

Take four mounting screws out

Take four mounting screws out

3.Gently remove the original radio

Gently remove the original radio

Gently remove the original radio

4.Get out these four screws

Get out these four screws

Get out these four screws

5.Take out your hot new unit

Take out your hot new unit

Take out your hot new unit

6.Check out QA

Check out QA

Check out QA

7.Make out the transport screws

Make out the transport screws

Make out the transport screws

8.Make your accessories inserted in

Make your accessories inserted in

Make your accessories inserted in

9.Remove panels to install reversing cam

Remove panels to install reversing cam

Remove panels to install reversing cam

10.Have a check for that camera prior to drilling

Have a check for that camera prior to drilling

Have a check for that camera prior to drilling

11.Fix the screws which was taken out from the original radio

Fix the screws which was taken out from the original radio

Fix the screws which was taken out from the original radio

12.Make other parts of head unit back to their original place

Make other parts of head unit back to their original place

Make other parts of head unit back to their original place

With so detailed steps for Toyota Yaris navigation dvd installation,I believe that you should have known the main jobs about upgrade affairs.One thing will become not that difficult when you have made up your mind to finish it,because confidence and perseverance we have can help us do it better.

But it’s normal that we will still account some situations which stops us going on,then you need to think about which step is wrong and try to correct it then continue.Or you can also visit next website to see whether your problem will be solved: http://www.seicane.com/2012-2013-toyota-yaris-gps-radio-sound-system-hd-touch-screen-cd-dvd-player-tv-tuner-bluetooth-aux-dvr-1080p-backup-camera-3g-wifi-ipod-iphone-steering-wheel-control-c146.

There are a lot of information that can be applied for you in above website,hope you can enjoy entertaining time during driving soon and have a wonderful journey with your family or friends.

Precautions after installation:

1.Please pay more attention to your new head unit when you are driving on a rainy day,for the moisture may gather on it and cause damage to it

2.Please do not stare  at the video or something else of the GPS radio when you are driving,it’s dangerous

3.If you need to clean it up,please use a piece of dry cloth to do it,without using any other chemical cleaning objects

 

Posted in Toyota car DVD. Tagged with , , .

How to remove 2013 Toyota RAV4 original radio stereo and install GPS bluetooth dvd

Before we know the specific upgrade steps,I’d like to show you an image:head unit after installation,radio GPS dvd bluetooth with sat nav system of 2013 Toyota RAV4.

head unit after installation,radio GPS dvd bluetooth with sat nav system of 2013 Toyota RAV4

head unit after installation,radio GPS dvd bluetooth with sat nav system of 2013 Toyota RAV4

This new unit is one special stereo that suits 2013 Toyota RAV4,you can have a look at its trim panel and compare it with your original one’s.They are same,this is why it fits your car.

Nowadays more and more things are upgrading at very rapid speed with faster and faster development of technology.This is where the market just is,that human begins need more advanced products,they need so they seek for this kind of life style.

So how to remove 2013 Toyota RAV4 original radio stereo and install GPS bluetooth dvd?About this question,I will show you detailed installation steps for it in the following part.

Most of you are thinking about the upgrading things but don’t know what to do with the car radio.Don’t worry,you’ll see specific installation steps for Toyota RAV4 radio in latter part.But please note to remove the negative power cable from the battery before you begin your installation as the next picture shows.

2013 Toyota RAV4 original radio removal and aftermarket radio installation:

1.Make out the upper dashboard trim panel with an automotive tool,set the panel aside once removed

Make out the upper dashboard trim panel with an automotive tool

Make out the upper dashboard trim panel with an automotive tool

2.Pry the air conditioning vents on the left and right-hand sides of the factory touch careen unit gently away from the dashboard

Pry the air conditioning vents on the left and right-hand sides of the factory touch careen unit gently away from the dashboard

Pry the air conditioning vents on the left and right-hand sides of the factory touch careen unit gently away from the dashboard

3.Gently lever the clock display and hazard lamp panel away from the dashboard and set it to the side

Gently lever the clock display and hazard lamp panel away from the dashboard and set it to the side

Gently lever the clock display and hazard lamp panel away from the dashboard and set it to the side

4.Get out the four retaining screws attaching the factory touch screen unit to the dashboard

Get out the four retaining screws attaching the factory touch screen unit to the dashboard

Get out the four retaining screws attaching the factory touch screen unit to the dashboard

5.Gently remove the touch screen unit away from the dashboard and lean it forward to gain access to the wiring harnesses on the reverse side

Gently remove the touch screen unit away from the dashboard and lean it forward to gain access to the wiring harnesses on the reverse side

Gently remove the touch screen unit away from the dashboard and lean it forward to gain access to the wiring harnesses on the reverse side

6.Make the touch screen disconnected by unplugging the individual harnesses

Make the touch screen disconnected by unplugging the individual harnesses

Make the touch screen disconnected by unplugging the individual harnesses

7.Absolutely removed dashboard

Absolutely removed dashboard

Absolutely removed dashboard

Original Toyota RAV4 radio removal has finished until here,in fact removal is the main part of upgrading car radio.

If you have a clear idea about removal affairs,the next installation process will not be a hard thing to you.

And it can be divided into three parts:make connections with all cables,install new machine and install other parts back to their primary places.

When you feel a little difficult to do the connection or other things,you can scan some helpful websites which will give you correct guide,for example: http://www.seicane.com/all-in-one-touch-screen-radio-stereo-for-2013-toyota-rav4-with-3g-wifi-dvd-player-bluetooth-music-tv-tuner-ipod-aux-steering-wheel-control-c247 ,or you can ask someone who knows better about this aspect.

We should know that making sure your security is actually the most important no matter how entertaining that reaching this upgrade goal is.So please having a better understanding about the upgrade as much as possible and making adequate preparations as you can before any work.

Precautions after installation:

1.Please try to make the radio away from heat sources,such as heating,heat or have other things,or it may cause damage to the machine

2.Please do not expose this machine to rain or moisture in the environment(as when rain or car washing) to avoid the internal machinery of the short circuit,which may cause some danger

3.You have to shut down power cables and then wipe panel before you clean the head unit.No using volatile chemicals to clean trim panel

 

Posted in Toyota car DVD. Tagged with , , .

How to upgrade 2010 Toyota Raze cd player with sound system

Can you recognize this image:dvd player aftermarket radio gps navigation bluetooth of 2010 Toyota Raze?

dvd player aftermarket radio gps navigation bluetooth of 2010 Toyota Raze

dvd player aftermarket radio gps navigation bluetooth of 2010 Toyota Raze

Some vehicle owners of Toyota Raze may have seen this stereo when you are shopping in the car market,you want to take one home but you have no idea how to install it in your car.Or in other words,you don’t know how to remove factory radio first.Doesn’t matter,here will show you 10 steps on how to upgrade 2010 Toyota Raze cd player with sound system.

It can be very easy to confirm information of cars like mode,size and years,but if is’s about the detailed steps to mount a car autoradio?Maybe very few people knows.

Before you upgrade your car’s head unit,you should ensure that the instructions for it are exactly right.General process can be like this:

first of all,choose one player that can be installed in your car.Next,trying to collect precise installation guide from the Internet,TV,magazine or other media routes.Chatting with workers who serves in this market and tell them what your doubt is about is one of ways that is normally used.So you may visit this website to get what you want by scanning and talking with them:http://www.seicane.com/8-inch-2010-toyota-raze-autoradio-gps-head-unit-3g-wifi-cd-dvd-player-dvr-bluetooth-music-tv-tuner-aux-steering-wheel-control-ipod-iphone-backup-camera-mp3-pop-c084.

If you would like to make your Toyota Raze cd player removal and dvd player installation more precise and safer, here are some suggestions about the installation and usage of the unit:

Precautions about the installation:

Please use touch screen pen to operate unit, do not use other objects include your fingers, if not it will cause damage to the screen;Don’t do self-service,maintenance or install the unit please when you have no experience or knowledge about it,in case of the power is on

2010 Toyota Raze cd player removal:

1.Before starting installation,remove the negative cable of battery

2.Release side panels with a panel removal tool from lower center console(beside shifter)

Release side panels with a panel removal tool from lower center console

Release side panels with a panel removal tool from lower center console

3.Remove the plastic piece which contains the shifter override with a small flat blade screwdriver

Remove the plastic piece which contains the shifter override with a small flat blade screwdriver

Remove the plastic piece which contains the shifter override with a small flat blade screwdriver

4.Insert special removal tool  into override move in gear, then take out shift benzal piece

Insert special removal tool  into override move in gear

Insert special removal tool into override move in gear

4.Make 2 screws out from sides of aux input panel unplug connectors

Make 2 screws out from sides of aux input panel unplug connectors

Make 2 screws out from sides of aux input panel unplug connectors

5.Take below small dashboard out

Take below small dashboard out

Take below small dashboard out

6.Release side panels from radio with a panel removal tool

Release side panels from radio with a panel removal tool

Release side panels from radio with a panel removal tool

7.Take air vent out and disconnect hazard switch

Take air vent out

Take air vent out

8.Remove 10mm hex head screws from factory stereo

Remove 10mm hex head screws from factory stereo

Remove 10mm hex head screws from factory stereo

9.Release the stereo,unplug connectors behind it and then remove it

Release the stereo,unplug connectors behind it and then remove it

Release the stereo,unplug connectors behind it and then remove it

2010 Toyota Raze dvd bluetooth installation:

10. connect all the cables correctly and install the dvd player in it

Connecting the wiring is a work that you should be more careful because it is more complex than other steps itself and there are much fine wires.If you are not very sure about it,I suggest you to do it according to corresponding instructions,check it again after you have finished it to avoid removal once again because you think it’s right and install new radio into it,but in fact it’s not.

After correct connection,you can install the radio and other part things to car and turn on it.If the unit can operate normally,then you have just finished installation yourself.

You can choose some websites to visit if you have interests in learning some other head units,may be next one can be a not bad choice:http://www.seicane.com.And I wrote another article which is about Toyota Verso gps,hope you can receive something that benefits you.

 

Posted in Toyota car DVD. Tagged with , .

Installation guide for 2011 2012 Toyota Avalon gps radio aftermarket sat nav system

I’d like to show you a picture at the beginning of this article:new unit after replacement,gps dvd autoradio aftermarket sat nav system of 2011 2012 Toyota Avalon.

new unit after replacement,gps dvd autoradio aftermarket sat nav system of 2011 2012 Toyota Avalon

new unit after replacement,gps dvd autoradio aftermarket sat nav system of 2011 2012 Toyota Avalon

This unit matches your car if it is one of 2011 2012 Toyota Avalon.To see the space after head unit removal is whether right for new unit is the only way to figure this question.After you are sure that this head unit is suitable for your car and decide to install a new one by yourself,then you are right to read this essay which will show you installation guide for 2011 2012 Toyota Avalon gps radio aftermarket sat nav system.

It also doesn’t matter if it seems to be improper for your car,because there are some places for stereo upgrade are common,it means that you can also learn a lot from the following description,and probably you can provide some advises to your friend.

Installing an aftermarket car stereo can be a self-done thing doesn’t mean that you can do it without taking care of anything.There are some notes for you before you begin any work.

Precautions before installation:

1.Please do not stop your car very suddenly,it may cause injury to driver and passengers

2.Before opening the hole from face plate in the dashboard panel,make sure that the rear space is enough.Be careful,do not damage the fuel cable,brake cable,electrical components,power lines or cable communications

3.When use the screws,please ensure that they are not contact with any electrification down-lead.Vibration may have damaged wire or insulation skin and lead to a short circuit or other damage to the vehicle

2011 2012 Toyota Avalon car stereo removal and installation:

1.Original CD radio

Original CD radio

Original CD radio

2.Get the gear shift panel  out

Get the gear shift panel  out

Get the gear shift panel out

3.Get screws out as the picture show

Get screws out

Get screws out

4.Take the lid of the surface out with a soft lever

Take the lid of the surface out with a soft lever

Take the lid of the surface out with a soft lever

5.Take two screws out as the image show

Take two screws out

Take two screws out

6.Remove factory  autoradio

Remove factory  autoradio

Remove factory autoradio

7.This is removed factory car radio looks like

removed factory car radio

removed factory car radio

Head unit removal is finished here,and next work is Toyota Avalon gps installation.Actually it can be easier if you can complete the  cable connection successfully.

Please be very careful when you are making connections on cables,for you should make sure that you have connected all wirings correctly.I recommend you to check it again if you are not very sure about it to avoid once stereo removal again.Then you can install the new unit into the space.

Turn on it and see whether the touch screen can work,then install other parts that were removed before to their original places.This is the whole installation process.

If you still have any doubts or problems that troubles you,you can visit some websites to solve them,such as http://www.seicane.com/8-inch-autoradio-dvd-car-audio-system-for-2011-2012-toyota-avalon-with-3d-gps-bluetooth-radio-rds-3g-wifi-tv-tuner-mp3-mp5-ipod-aux-hd-1080p-video-backup-camera-c270 ,

which can directly solve problems on this unit andhttp://www.seicane.com,where there are a lot of stereo there and you can have a general idea about car dvd.

 

Posted in Toyota car DVD. Tagged with , , .

2004-2011 Toyota Corolla aftermarket sat nav system installation

After you bought a car DVD player that matches Toyota Corolla,what may makes us feel troubled may be the installation for it.Someone may say that he will ask a professional person to help him.However,most people choose to install the head unit themselves.Thus knowing 2004-2011 Toyota Corolla aftermarket sat nav system installation is very necessary especially when you are not so familiar with your beloved car.But how can we mount the car radio successfully?Maybe you should read some useful guide to avoid some wrong opeartions.

Before you begin your removal staffs,you should know if this player is suitable for your car dashboard at first.After that,then we start to figure out the installation guide for Toyota Corolla aftermarket sat nav system.

After attention for these details , turn off the radio before you shut down your car. And these are the removal steps for car stereo.

1.Pry the below panel with a lever and disconnect the cable

pry the below panel with a lever

pry the below panel with a lever

disconnect the cable

disconnect the cable

2.Remove the small middle panel and take out the screw

remove the small middle panel

remove the small middle panel

take out the screw with a screwdriver

take out the screw with a screwdriver

3.Open up the below panel and gently pull off it

open up the below panel and gently pull off it

open up the below panel and gently pull off it

4.Prize the dashboard with a lever

prize the dashboard with a lever

prize the dashboard with a lever

5.Take out four screws with a screwdriver

take out four screws with a screwdriver

take out four screws with a screwdriver

6.Prize the dashboard in certain places which seems obvious

prize the dashboard on the right side

prize the dashboard on the right side

pry the dashboard on the left side

pry the dashboard on the left side

7.After that you can take out the CD player slowly

take out the CD player slowly

take out the CD player slowly

8.Disconnect the cables between the CD player and the car

disconnect the cables between the CD player and the car

disconnect the cables between the CD player and the car

After removal things,the next part turns to mounting the dvd player.

9.Make the cables connected to car correctly and put it in the right place

10.Make dashboard to original place and firm all the screws which had been removed

Here is an image of car radio after installation,stereo autoradio of 2001-2011 Toyota Corolla.

car radio after installation,stereo autoradio of 2001-2011 Toyota Corolla

car radio after installation,stereo autoradio of 2001-2011 Toyota Corolla

If you want to know more about this dvd player,you can visit the next website for more detailed information: http://www.seicane.com/8-inch-2004-2011-toyota-corolla-hilux-matrix-previa-vios-zelas-prado-land-cruiser-fj-aftermarket-car-bluetooth-navigation-system-with-radio-rds-dvd-tv-tuner-3g-wifi-aux-c010.

Whenever you start up your upgrade work,still remember that keeping you safe is more important than anything.Do not make jokes for your life,and also your beloved car.Therefore please be soft and gentle to your car radio especially when you are removing dashboard and CD player of the unit,in addition,connecting the cables correctly is a key job during your installation.It’s not hard but on the situation that we are careful enough and take serious about just only small details.

After seeing above specific introduction for how to install Toyota Corolla aftermarket sat nav system,have you finished it yourself successfully?If not,don’t worry about it because you will come up with ways to solve it by collecting enough information,getting a better understanding of the unit,acting according to the installation guide show and so on,the last one,which is also the most important.

Posted in Toyota car DVD. Tagged with , , .

How to remove 2006-2011 Toyota Camry aftermarket stereo autoradio

Head unit after installation,dvd player of 2006-2011 Toyota Camry

head unit after installation,dvd player of 2006-2011 Toyota Camry

head unit after installation,dvd player of 2006-2011 Toyota Camry

In the modern society,more and more car owners are willing to install a GPS navigation system in their cars.It fully shows that this kind of demand is becoming larger and more necessary at the same time.But do you know how to remove 2006-2011 Toyota Camry aftermarket stereo autoradio?

No need to worry about,this article will tell you detailed steps of removal.

Before you begin your installation,there are some announcements here:

please check the appearance and all the functions of the car to see whether it works well before installing the unit.It will arise antenna problem if you shorten or extened the GPS antenna.Don’t make the GPS antenna winding the steering wheel and shift lever,it can be dangerous.

Warm prompt:

1.Don’t use strong chemicals,cleaning agents,strong detergent wash the machine

2.Please use a clean soft fabric to wipe the screen,without using ordinary fabric.

3.Please use touch screen pen to operation unit,don’t use other sharp objects,or it will damage the screen

4.Please protect the original display well when the staff dismounting the original CD in order to use the original screw once again.

After you have noticed all this, I will show you steps for removing 2006-2011 Toyota Camry aftermarket stereo autoradio.

1.Lever the below dashboard softly

lever the below dashboard softly

lever the below dashboard softly

2.Remove two screws with a screwdriver

remove two screws with a screwdriver

remove two screws with a screwdriver

3.Take out two screws which beside the white ones

take out two screws which beside the white ones

take out two screws which beside the white ones

4.After that you can lever the upper dashboard gently

lever the upper dashboard gently

lever the upper dashboard gently

5.Take out the CD player softly and disconnect all the cables

take out the CD player softly

take out the CD player softly

disconnect all the cables

disconnect all the cables

6.The CD player after removal

the CD player after removal

the CD player after removal

7.Connect the cables of new unit to the right places after the removal procedure,or you can take instructions as reference

8.Install upper dashboard and firm the four screws and make the below dashboard to its original position

With these specific steps regard to how to remove 2006-2011 Toyota Camry autoradio , and help of other information which is correct and useful, it can’t be a difficult thing to upgrade the CD player of the car.

In order to make sure that your car radio nav system can be used longer,you’d better install the unit according to the above correct steps.With good installation and maintance, it surely  will  make your usual life more pleasant.

Attention:

1.It can damage pick up if you are listening disc when your car is running on very bumpy road.

2.In addition to, when the car navigation system is operated extremely,such as operated with very fast speed for a long time,it will enter heat protection mode,the volume will be lower automatically, this is normal thus you need to be careful.

So gathering right information as much as possible and behaving according to the guidance is the wisest choice.Or you can scan relevant websites if you have troubles about the replacement of the head unit,for example:http://www.seicane.com/cheap-8-inch-2006-2011-toyota-camry-aurion-aftermarket-navigation-stereo-radio-tuner-bluetooth-music-3g-wifi-aux-pop-usb-sd-1080p-video-backup-camera-ipod-iphone-mp3-usb-sd-c064.

 

Posted in Toyota car DVD. Tagged with , , .