One day, if you find your factory radio cannot be compatible with many modern features, then you should consider replacing it with a new aftermarket car stereo which is usually integrated with a lot of practical and entertainment features. As most car stereos come with special wiring harness nowadays, the installation is quite easier than before. And with a detailed guide, you can also finish the installation on your own. This passage is about the installation guide for a 2014 2015 Toyota Prado Bluetooth GPS Car Stereo. If you own the same dashboard, you may read it carefully.
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2014 2015 Toyota Prado car stereo installation guide
1. The control clip under the car radio can be easily removed. Open clips with dash remover, and the rest can just be pulled out.
2. The radio is held by 4 Torx20 bolts, you will need to use a Torx20driver to remove them.
3. Once all those bolts are gone, gently lift the radio up and pull towards you.
4. Pulled out along with cables behind.
5. Check all the accessories for the new Seicane car stereo.
6. Connect the harnesses to the back of the new Seicane car stereo.
7. Connect the Seicane car stereo to your original stereo’s plugs.
8. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
9. Put the new Seicane car stereo into the dash.
10. Put everything into their original place. All the installation is done.
So can you understand the above installation guide? If you cannot fully understand it, you can seek help from your dealer or a professional. However, before you start the installation, please check whether your new car stereo is compatible with your beloved car or not. If you don’t have a suitable stereo, I’d like to recommend a great 2014 2015 Toyota Prado Bluetooth GPS Car Stereo from Seicane to you. For more details, please click:
With a super large 10.2 inch HD 1024*600 multi-touch screen, this great car stereo greatly facilitates the operation and enables you to enjoy your video display as well as have a better view of your road ahead. The high-precision GPS navigation system is specially built in to lead you to your destinations accurately, so you needn’t worry about getting lost any more. Besides, as to the entertainment options, thy can also add a lot of fun to your driving. Just install this car stereo in your car and enjoy the fun it brings to you from now on!