Do you want to enjoy more convenience and entertainment in your car? If your answer is “yes”, then you can think about upgrade your mono-functional car radio by installing a multifunctional car radio which can keep you entertained as well as offer much convenience for you on the way. Here I would like to share a detailed 2006-2010 TOYOTA Camry car radio installation instruction from Seicane to you. If you have the same or similar dashboard, you can refer to this instruction carefully to help with your installation.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006-2010 TOYOTA Camry car radio installation instruction
1. Remove two trim panels at each side of the center console and set it aside.
2. Remove the top panel and set it aside.
3. Remove 4 screws holding the unit with a Phillips screwdriver.
4. Gently take out the panel on the radio interface.
5. Take out the radio and disconnect cables at back of it.
6. Check all the accessories for the new Seicane car radio.
7. Connect the harnesses to the back of the new Seicane car radio.
8. Connect the Seicane car radio to your original car radio’s plugs.
9. Put the new Seicane car radio into the dash.
10. Turn on the new Seicane car radio and have a comprehensive check if it works well.
11. Install 4 screws back to their original position.
12. Install the trim panel back to its original place.
Please don’t be over worried if you encounter some difficulties before or during the installation. To overcome these difficulties, you can browse some professional websites, contact your dealer for some advice or turn to a professional for help. Anyway, it is essential for you to check the compatibility between your new car radio and your car. If your new car radio is not compatible enough, it is suggested that you should quit it and choose another compatible one. Here I would like to share a powerful 2006-2010 TOYOTA Camry car radio from Seicane with you. For more details, please click:
Upgraded to the stable Android 6.0 operation system and a powerful 8-core 1.5 GHz RK-PX5 A53 processor, this great car radio comes with the better performance to be your best replacement for your factory radio.
Thanks to the guidance of turn-by-turn directions and voice prompt provided by the high-end 3D GPS navigation system, you can quickly locate where you are and accurately navigate to your desired destinations. And this unit’s dual zone function enables you to play your favorite music while navigating to your destinations.
The powerful built-in Bluetooth module enables you to connect your Bluetooth-enabled mobile phone to this car radio, so without taking your hands off the steering wheel, you can make, receive, reject and mute hands-free calls as well as enjoy Bluetooth streaming music from your mobile phone.
Wish you have an unforgettable in-car life accompanied by this unit and good luck to you!