To create a more comfortable car interior environment, you can depend on replacing your factory radio with a new aftermarket car radio which can be compatible with numerous comprehensive features to meet your different needs in car. If you have a 2007 2008 2009 2010 2011-2015 Mazda CX-9 and are going to make the new car radio replacement, then you can find a related installation guide and follow it to deal with the installation. The following is a 2007 2008 2009 2010 2011-2015 Mazda CX-9 car radio installation guide from Seicane, which can be taken as reference.
Here are 4 tips about the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2007 2008 2009 2010 2011-2015 Mazda CX-9 car radio installation guide
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
2. Remove screws that fixed the radio on the dashboard.
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
4. Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Before installation, please make clear every detailed step. If you have any doubts, please feel free to contact your dealer, communicate with someone experienced or seek help from a professional. For avoiding damage to either your car radio or your car, you can directly go to a car radio upgrade center and ask a professional technician to help you install the new car radio. Anyway, before installation, it is very crucial for you to pick an ideal car radio for your car. If you have no ideas, you can check out the following link which is a remarkable 2007 2008 2009 2010 2011-2015 Mazda CX-9 car radio from Seicane.
This car radio’s operation system has been upgraded to advanced Android 7.1 version and it has a high-quality quad-core CPU processor as well as 2GB RAM. So it can be regarded as one of the good choices for you to replace your factory radio.
As long as you turn on this unit’s high-end 3D GPS navigation function, you can easily know your current locations and accurately reach your destinations thanks to a lot of features which mainly include current location, speed, mileage, landmark building display, 3D street view, destination search and turn-by-turn voice directions. And this unit comes with dual zone function, which enables you to listen to your favorite music under GPS mode.
Additionally, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, Bluetooth hands-free phone calls and Bluetooth streaming music are both available for you to bring you more convenience and enjoyment.
If you like this unit, just don’t forget to add this unit to your shopping cart. Good luck to you!