If you have an advanced car radio with high-accuracy 3D GPS navigation system, you can easily locate where you are and gain the best route option to arrive at your destinations. However, if your original radio cannot support 3D GPS function, you can consider installing a brand new multifunctional car radio to replace your factory radio.
To effectively help you install the new car radio, here I would like to share a 2006 2007 2008 2009 2010-2012 VW VOLKSWAGEN MAGOTAN car radio installation instruction from Seicane with you.
Some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006 2007 2008 2009 2010-2012 VW VOLKSWAGEN MAGOTAN car radio installation instruction
1. Remove the top panel with a lever.
2. Disconnect the connector at the back of the panel.
3. Unscrew the screw with a screwdriver.
4. Remove the metal sheet on the top with your hands.
5. Unscrew two screws circled in red shown as follows under the metal sheet.
6. Remove the air conditioner vent with your hands.
7. Unscrew two screws under the vent with a screwdriver.
8. Remove the panel on the original car radio.
9. Unscrew four screws holding the original car radio with a screwdriver.
10. Take the original car radio out of the dash.
11. Disconnect all the connectors at the back of the original car radio.
12. Check all the accessories for the new Seicane car radio.
13. Connect the harnesses to the back of the new Seicane car radio.
14. Connect the Seicane car radio to your original car radio’s plugs.
15. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
16. Put the new Seicane car radio into the dash.
17. Put everything into their original place.
If you have any doubts about either your car radio or your car, you’re welcome to turn to your dealer, someone experienced or a professional for help. However, if you are afraid of making some damage to either your car radio or your car, you can directly go to a car radio upgrade center to get the new car radio installed by the technician.
To help effectively select an ideal car radio, here I would like to recommend a great 2006 2007 2008 2009 2010-2012 VW VOLKSWAGEN MAGOTAN car radio from Seicane to you. For more details, please click:
Equipped with the worldwide real-time GPS navigation function of high accuracy, this car radio enables you to take advantage of a lot of features, including landmark building display, 3D street view, destination search, turn-by-turn directions, voice prompts, etc. Therefore, you can easily know your current locations and accurately reach any locations you would like to go to. Additionally, while navigating, you can freely listen to your favorite music because of this unit’s dual zone function.
What’s more, if you feel tired and bored for staying in car for a long time, you can utilize this unit’s DVD player function to play your favorite music, videos, TV programs, movies, etc, which can help you gain a lot of fun to relax both yourself and your passengers. It comes with a large 8 inch smart screen, which can provide you the best display effect.
If you like this unit, just add it to your shopping cart right now. Good luck!