Do you want to accurately arrive at your destinations on time? Or do you want to relax yourself all the way while you are driving? If your answers toward these two questions are both “yes”, then you can read this passage which can help you achieve these goals. With some related installation experience and a correct guide, you can also try to finish the whole upgrade process of your new car radio. This article aims to introduce a 2012 Toyota Hilux car radio installation instruction to you. If you have the same or similar dashboard, you can take this instruction as a reference.
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2012 Toyota Hilux car radio installation instruction
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
2. Remove screws that fixed the radio on the dashboard.
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
4. Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Before installation, please make clear every detailed step. If you have any questions, please feel free to consult your dealer for advice or seek help from a professional. Or for avoiding damage to either your car radio or your car, you can directly go to a car radio upgrade center to ask a professional technician to install the new car radio. Besides, if you are still looking for a suitable car radio for your car, here I would like to share an amazing 2012 Toyota Hilux car radio from Seicane to you. For more details, please click:
Loaded with the stable Android 6.0 operation system and a high-quality 8-core CPU processor, this great car radio enhances its performance to be the best replacement for your factory radio in 2012 Toyota Hilux.
With the assistance of the high-accuracy 3D GPS navigation system, you are able to easily locate where you are and navigate to your desired destinations through turn-by-turn directions and voice prompts. Additionally, thanks to this car radio’s dual zone function, you can freely enjoy your favorite music from radio, AV, DVD, TV etc while navigating, which won’t have any negative influence on GPS function.
Besides, the advanced Bluetooth module is specially built in for you to dial, answer, reject and mute hands-free calls as well as listen to Bluetooth streaming music from your mobile phone if you connect your Bluetooth-enabled mobile phone to this unit.
Wish you like this unit. Good luck!