Are you still searching online for a detailed installation guide on a 2006-2012 Mercedes Benz Viano Vito car stereo? If yes, then I’d love to congratulate that you’ve found it by now. We write this post to introduce several steps to install a 2006-2012 Mercedes Benz Viano Vito car stereo. If you also have a plan to upgrade your factory radio, then you can read these steps carefully. Wish you can get some help from them.
Some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006-2012 Mercedes Benz Viano Vito car stereo installation steps
1. The original car radio.
2. Remove the air vent with a plastic removal tool and then put it aside.
3. Remove the trim panel with a plastic removal tool.
4. Remove four screws that fixed the radio on the dashboard.
5. Take out the original car radio.
6. Unplug the connectors at the back of the original radio.
7. Check all the accessories for the new Seicane car stereo.
8. Connect the harnesses to the back of the new Seicane car stereo.
9. Connect the Seicane car stereo to your original radio’s plugs.
10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car stereo into the dash.
12. Put everything into their original place. All the installation is done.
Can you totally understand the above steps? If you can’t, please don’t hesitate to contact your dealer for seeking advice, or turn to a professional for help. Or you can browse some professional websites. However, if you think the installation process is too complicated for you, then you can directly arrange a technician to help you install the car stereo directly.
Additionally, if you are still looking for a suitable car stereo for your beloved car, then you may check out the following link which is a 2006-2012 Mercedes Benz Viano Vito car stereo from Seicane.
This car stereo, upgraded to the most stable Android 6.0 operation system, a powerful 8-core CPU processor and 32GB Inland flash as well as 2GB RAM, is up-to-date enough to be the best replacement of your factory radio in a 2006-2012 Mercedes Benz Viano Vito.
With the assistance of the worldwide real-time 3D GPS navigation system, you can easily know your current locations and accurately navigate to your destinations through turn-by-turn directions and voice prompts. And with dual zone function, you can freely enjoy your favorite music while navigating.
Besides, under the wireless Bluetooth technology, you can connect your Bluetooth-enabled mobile phone to this unit so as to dial, receive, reject or mute hands-free calls as well as listen to streaming music from your phone music playlists without taking your hands off the steering wheel.
Wish you like this unit and good luck to you!