When you are having a self-driving travel, to reach any locations you are unfamiliar with, what you need is to turn on the GPS function to easily find the best way. However, if your factory radio cannot support GPS function, or the GPS function is not advanced enough, it is wise of you to replace your old factory radio with a new aftermarket car radio. If you own a 2009 2010 2011 Renault Megane3, to help you successfully install your new car radio, I’d like to share a 2009 2010 2011 Renault Megane3 car radio installation instruction from Seicane with you for your reference.
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2009 2010 2011 Renault Megane3 car radio installation instruction
1.Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
2.Remove screws that fixed the radio on the dashboard.
3.Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
4.Unplug the connectors at the back of the factory radio.
5.Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
6.Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7.If everything is OK, firm screws into their original place.
8.Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Wish the above removal and installation process can be helpful for you. If you encounter any problems you cannot deal with independently, you can browse some professional websites or seek help from your dealer, someone experienced or a professional. Or you can directly go to a car radio upgrade center to arrange a professional technician to help you install the new car radio. Besides, it is essential for you to pick an ideal car radio. If you have no ideas, you can refer to the following link which is a remarkable 2009 2010 2011 Renault Megane3 car radio from Seicane.
This amazing car radio is loaded with the most advanced and stable Android 7.1.1 operation system and a strong quad-core processor which enables you to enjoy its higher performance, configuration and capabilities.
With the assistance of the high-end 3D GPS navigation system, this unit enables you to know your current locations and find the right way to reach your desired destinations through turn-by-turn directions and voice prompts. And thanks to this unit’s dual zone function, you can freely enjoy your favorite music while navigating, and the music will automatically switch to GPS voice.
Besides, Bluetooth hands-free calls and Bluetooth streaming music are both available for you through the connection between your Bluetooth-enabled mobile and this car radio. Therefore, you can enjoy great convenience and enjoyment.
Wish you enjoy your driving experience accompanied by this car radio. Good luck to you.