Category Archives: Subaru car DVD

How to install 2012 2013 Subaru Outback bluetooth dvd with touch screen aftermarket stereo

Before we talk about specific steps on how to install 2012 2013 Subaru Outback bluetooth dvd with touch screen aftermarket stereo,we can have a look at next picture first.

New stereo after upgrade,bluetooth dvd touch screen with 3G Wifi of 2012 2013 Subaru Outback

New stereo after upgrade,bluetooth dvd touch screen with 3G Wifi of 2012 2013 Subaru Outback

It’s not hard to find a specially produced radio for 2012 2013 Subaru Outback,and this unit is just one of it.This stereo is different from original one on the appearance and functions.You can see it very directly that this unit’s screen is bigger and also nicer.Some new functions such as dvd ,bluetooth,3G wifi and so on are increased in it,which can make our driving time more entertaining.

Before the introduction of installation guide for it,I’d like to show a video which is about how to operate this unit first,you can have a easy view at it:

More and more people want to update vehicle stereos,it’s mainly for people’s needs to everything is getting higher so we need to find more interesting things or things that can make us feel relaxed,such as go on a trip or even have a big rest.

After viewing that video,I hold that most of you have a general idea about new stereo.No matter whether are you going to install one, patiently reading next part will benefit you for you can tell your friends how to do it someday.

2012 2013 Subaru Outback original stereo removal and bluetooth dvd installation:

1.Take this handle out

Take this handle out

Take this handle out

2.Release trim panel with a tool as picture show

Release trim panel with a tool as picture show

Release trim panel with a tool as picture show

3.Get its surrounding panel out

Get its surrounding panel out

Get its surrounding panel out

4.Prize edge of trim panel around it and remove the panel,make cables behind it disconnected

Prize edge of trim panel around it and remove the panel

Prize edge of trim panel around it and remove the panel

make cables behind it disconnected

make cables behind it disconnected

5.Take 2 screws out with the  help of  screwdriver

Take 2 screws out with the  help of  screwdriver

Take 2 screws out with the help of screwdriver

6.After that,you can make two side trim panels out

make two side trim panels out

make two side trim panels out

7.Remove 5 screws which distributes 2 sides of radio,and 2 on one side,and 3 on the other side,then you can take out CD player and disconnect cables beside it

Remove 5 screws which distributes 2 sides of radio

Remove 5 screws which distributes 2 sides of radio

8.Get screws on original unit out

9.Get surface panel of CD out of head unit

Get surface panel of CD out of head unit

Get surface panel of CD out of head unit

10.Make cables and antennas connection as following pictures show

make cables and antennas connection

make cables and antennas connection

make cables and antennas connection 2

make cables and antennas connection 2

11.After connection,mount trim panel on stereo and leave this cable outside

mount trim panel on stereo and leave this cable outside

mount trim panel on stereo and leave this cable outside

12.Make round red cable connected upper right side of the panel

Make round red cable connected upper right side of the panel

Make round red cable connected upper right side of the panel

13.Make outside antennas connected to back of new stereo

Make outside antennas connected to back of new stereo

Make outside antennas connected to back of new stereo

14.Install new audio in the space for it

Install new audio in the space for it

Install new audio in the space for it

15.Make screws fixed and cover panels back to original places

Make screws fixed and cover panels back to original places

Make screws fixed and cover panels back to original places

In total these are 15 steps for Subaru Outback bluetooth radio installation.Don’t be afraid by this digital,it seems to be many things while you will find there doesn’t exist very difficult works that you are unable to do,only if you can be serious and careful to it.

Of course,you can also ask a technical worker to do it if you want to make it more perfect.And it’s very possible to do it well if you want,though you are not professional at it.

In order to enjoy a better time when you are driving a car with a new stereo, you can visit some websites,for example:http://www.seicane.com/head-unit-auto-radio-cd-player-oem-replacement-system-for-subaru-outback-with-gps-navigation-3g-wifi-support-bluetooth-music-tv-dvd-function-c061  ,which will provide you a lot of specific information about this new radio.

 

 

Posted in Subaru car DVD. Tagged with , , .

Installation guide for 2010 2011 2012 2013 Subaru Legacy dvd navigation with bluetooth music

car stereo autoradio after update,gps dvd with sat nav system touch screen of 2010 2011 2012 2013 Subaru Legacy

car stereo autoradio after update,gps dvd with sat nav system touch screen of 2010 2011 2012 2013 Subaru Legacy

You may have seen this head unit before when you are shopping in a car market.But you are confused which one to choose or you are not sure which one is suitable for your car.Don’t worry,I will tell you methods to make a decision for this next paragraph,and the point of this article is to show installation guide for 2010 2011 2012 2013 Subaru Legacy dvd navigation with bluetooth music.

Comparing your owned radio panel with this one,it can be installed in your car if they are in same size and appearance.It doesn’t mean whole dashboard,just panel which covers space for stereo.So it should be very possible that this unit is suitable for your car for it can be considered a normal radio,especially when you are the owner of Subaru Legacy.

Before telling about whole procedure about Subaru Legacy car dvd installation,there are some tips for you to attention.

Precautions before installation:

Firstly, if you have installation instructions from the dealer,please read it carefully

Secondly,you should turn off all affairs of car and make sure that you have finished parking series

Thirdly,please remember to disconnect negative connector to ensure your safety

With attentions on all of them,next we will learn how to remove original stereo and install Subaru Legacy dvd navigation.

2010 2011 2012 2013 Subaru Legacy CD radio removal:

1.Pull this handle out by unscrewing it

Pull this handle out by unscrewing it

Pull this handle out by unscrewing it

2.Pry trim panel with a tool as picture show to release it(but not to remove)

Pry trim panel with a tool as picture show to release it

Pry trim panel with a tool as picture show to release it

3.Remove panel surrounded it

Remove panel surrounded it

Remove panel surrounded it

4.Prize edges of outside trim panel and remove it,disconnect cable connected it

Prize edges of outside trim panel and remove it,disconnect cable connected it

Prize edges of outside trim panel and remove it,disconnect cable connected it

5.Use a screwdriver,remove 2 screws

Use a screwdriver,remove 2 screws

Use a screwdriver,remove 2 screws

6.After that,you can pull out two side trim panels

pull out two side trim panels

pull out two side trim panels

7.Remove 5 screws which is beside stereo,one side has 2 ,and the other side has 3,then you can remove original player and unplug cables beside it

Remove 5 screws which is beside stereo,one side has 2 ,and the other side has 3

Remove 5 screws which is beside stereo,one side has 2 ,and the other side has 3

remove original player and unplug cables beside it

remove original player and unplug cables beside it

8.Remove surface panel of CD  from the unit,but before it you should remove screws on original unit first

Remove surface panel of CD  from the unit

Remove surface panel of CD from the unit

2010 2011 2012 2013 Subaru Legacy new radio installation:

Before starting mount of gps radio,we can have a look at following video first and it will give us intuitive things including how to operate new features:

9.Do connections on cables and antennas as following pictures show

Do connections on cables and antennas

Do connections on cables and antennas

Do connections on cables and antennas2

Do connections on cables and antennas2

Do connections on cables and antennas3

Do connections on cables and antennas3

10.After connection,mount trim panel on radio and leave one cable outside panel

mount trim panel on radio and leave one cable outside panel

mount trim panel on radio and leave one cable outside panel

11.Make round red connector connected  to upper right side of the panel

Make round red connector connected  to upper right side of the panel

Make round red connector connected to upper right side of the panel

12.Connect outside cable with  new radio

Connect outside cable with  new radio

Connect outside cable with new radio

13.Install new unit into right position

Install new unit into right position

Install new unit into right position

14.Firm removed screws and install panels to their primary places

Firm removed screws and install panels to their primary places

Firm removed screws and install panels to their primary places

You will surely accomplish this installation for Subaru Legacy dvd navigation only if you can do it as mount instructions say,everything needs guidance when we have no experience on it,so it is.If there still occur some problems,then you should think about whether some of your operation to car head unit is wrong or you forget to keep something back.You can also ask someone who works in this market for help. Visit a website and there will be someone to help you solve your problems is a not bad choice,for example:http://www.seicane.com/car-bluetooth-radio-upgrade-sat-nav-system-specialized-for-subaru-legacy-built-in-dvr-3-zone-pop-fm-am-hd-radio-tuner-with-gps-dvd-3g-wifi-c061-1,it will give you more details about new radio too.

I have written an article which is about upgrade of Subaru Outback radio,if you also have doubts about it you can go to visit it and may get what you want.

 

Posted in Subaru car DVD. Tagged with , , .