Specific installation steps for a 2008-2015 Mazda 6 Ruiyi car stereo with Bluetooth Mirror link HD touch screen OBD DVR TV USB SD 3G WIFI Rearview camera IPOD

623 views

Now more and more car owners would like to have a more comfortable in-car environment, so they try many ways to upgrade the capabilities of their car. One of the most popular ways is to replace the factory radio with a new aftermarket head unit which can support many features. Now to install a new unit, you can find a detailed installation guide for help. The below is a step-by-step 2008-2015 Mazda 6 Ruiyi car stereo installation guide from Seicane, you can read it carefully to help with the installation.

2008-2015 Mazda 6 Ruiyi car stereo after installation

2008-2015 Mazda 6 Ruiyi car stereo after installation

Safety notes

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

2008-2015 Mazda 6 Ruiyi car stereo installation guide

1. Remove your cup holder.

Remove your cup holder

Remove your cup holder

2. Unscrew and remove the shift knob.

Unscrew and remove the shift knob

Unscrew and remove the shift knob

3. Remove the shift trim panel with your fingers.

Remove the shift trim panel with your fingers

Remove the shift trim panel with your fingers

4. Then remove both sides trim panel of the speed control.

Then remove both sides trim panel of the speed control

Then remove both sides trim panel of the speed control

5. Pull out the panel and set it aside.

Pull out the panel and set it aside

Pull out the panel and set it aside

6. Remove four screws on each side of the speed control with a Phillips-screwdriver.

Remove four screws on each side of the speed control with a Phillips-screwdriver

Remove four screws on each side of the speed control with a Phillips-screwdriver

7.Pull out the speed control slowly.

Pull out the speed control slowly

Pull out the speed control slowly

8. Find two screws under the radio and remove them.

Find two screws under the radio and remove them

Find two screws under the radio and remove them

9. Push the top panel and set it aside.

Push the top panel and set it aside

Push the top panel and set it aside

10. Remove two screws with a Phillips-screwdriver as the picture shows.

Remove two screws with a Phillips-screwdriver as the picture shows

Remove two screws with a Phillips-screwdriver as the picture shows

11. Pull out the factory radio slowly.

Pull out the factory radio slowly

Pull out the factory radio slowly

12. Disconnect the original harness and set the factory radio aside.

Disconnect the original harness and set the factory radio aside

Disconnect the original harness and set the factory radio aside

13. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

14. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

15. Connect the Seicane car stereo to your original car radio ‘s plugs.

16. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

17. Put the new Seicane car stereo into the dash.

18. Put everything into their original place. All the installation is done.

Wish the 2008-2015 Mazda 6 Ruiyi car stereo installation above can be helpful you. If you have any question, it’s suggested you turn to your dealer for help. If you don’t have any experience on the installation, you’d better have it installed by a professional. Besides, you need to confirm your new stereo can be suitable for your car. To check the compatibility, you are welcome to click the link below which is about a top 2008-2015 Mazda 6 Ruiyi car stereo from Seicane.

http://www.seicane.com/android-in-dash-car-dvd-player-radio-gps-navigation-system-for-2008-2015-mazda-6-ruiyi-with-bluetooth-mirror-link-hd-touch-screen-obd-dvr-tv-usb-sd-3g-wifi-rearview-camera-ipod-s168001

This popular DVD player GPS navigation system can be well combined with 2008-2015 Mazda 6 Ruiyi with a great Android system. Now you can enjoy a simple operation and a crystal clear display on the large 8-inch large 1024*600 multi-touch screen. You can easily pair your Bluetooth-enabled mobile phone with this unit to make and receive hands-free calls to keep safe and stream music to relax on all trips. Why not take this Mazda 6 Ruiyi car stereo right now and have a great time from now on?

Related Posts

Posted in Uncategorized. Tagged with .

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>