I think most of you want to upgrade the audio system of Audi Q5.If you are really busy and doesn’t plan to do it yourself at all,then you can ask a skilled man to finish it.Or if you are more likely to try by yourself,it’s also possible to realize when you have grasped correct steps and specific installation instructions for 2008-2013 Audi Q5 bluetooth dvd audio GPS navigation system which contains some precautions about the upgrade process.
At first,let’s have a view at following image first,this is one car stereo which is specially for 2008-2013 Audi Q5: head unit after installation,bluetooth gps radio stereo sat nav system of 2008-2013 Audi Q5.
If you watch carefully,you will find that its trim panel is same to your factory one,this is why this unit can be installed in your car.This can be a guide to choose a suitable car dvd for other car owners.
From this picture,you will find that this Audi Q5 bluetooth dvd is different from other ones at some places.But it won’t matter the removal and installation for head unit.
Actually there are a lot of steps are similar among car stereo installation,it means that you will learn some useful things no matter whether this unit is suitable for your car.
2008-2013 Audi Q5 original audio removal:
1.The original stereo radio
2.Fasten the original screen frame and then remove it
3.Pull double flashing light button away from the unit
4.Get four screws which fixed the screen out
5.Disconnect the cable which is on the screen
6.Loosen and take out the air-conditioner vent grille
7.Remove four screws which fixed the original CD radio and remove the player
2008-2013 Audi Q5 dvd bluetooth installation:
8.Make wires connection as the picture show
9.Make connection between the cable and the GPS box
10.By using the support,fix the GPS box on the glove box
11.Make the cable connected to the radio
12.Connect original power line to the tieline
13.Then connect the tieline to the its original car position
14.Fix the removed screws
15.Turn on new radio and check all the functions,then install other parts to their original places
A well-done dvd player after installation will bring you too much entertainment and convenience.So if you have any questions about this procedure,you can get help from the Internet,for example,you can visit next site and solve them with the help of workers there:http://www.seicane.com/oem-dvd-gps-stereo-for-2008-2009-2010-2011-2012-2013-audi-q5-with-am-fm-radio-tv-tuner-bluetooth-music-pop-dvr-steering-wheel-control-auto-av-in-out-ipod-iphone-usb-sd-aux-c149 .
Please do not dismantle the host privately to avoid damage and accident.Before your installation work,you can start car engine to check original radio function display and control buttons to see whether the machine is normal; whether car inside and outside have squandering phenomenon.After that the installer can reflect the case to customers if the unit has any problem.
Please notice that when you are installing,the wire arrangement must be reasonable for the space for installation is limited.It is suggested to reduce unnecessary wires to make the new DVD unit easier to install and access.
The cables and wires that will be connected to the car head unit must be routed properly to avoid accessing any moving parts,including steering wheel column acceleration pedal and brake pedal.All wires must be properly bonded to against any loosen during driving.