As technology rapidly improves at present, you may find that although your factory radio can play CD disks and radio to relax or refresh you sometimes, it cannot be compatible with other some advanced features like GPS and Bluetooth function, thus it cannot meet your most needs. Under this circumstance, it is wise of you to replace your factory radio with a new aftermarket car radio. And if you want to finish the whole process by yourself, you can search for a related installation guide to help you. Today I would like to share a 2003 2004 2005 2006 2007- 2009 Kia Cerato car radio installation guide from Seicane with you. Wish you can get some help from it.
Precautions for this installation:
1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2. Please make sure that all fastened wires are isolated with electrical tape.
3. Please make sure the ignition is off to avoid short circuit.
4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2003 2004 2005 2006 2007- 2009 Kia Cerato car radio installation guide
1. The original car radio.
2. Use a plastic removal tool to remove the panel and unplug the connectors at the back.
3. Unscrew screws that fixed the radio on the dashboard.
4. Gently pull out the original radio.
5. Disconnect the connectors and cables at the back.
6. Check all the accessories for the new Seicane car radio.
7. Connect the harnesses to the back of the new Seicane car radio.
8. Connect the Seicane car radio to your original radio’s plugs.
9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car radio into the dash.
11. Put everything into their original place. All the installation is done.
That’s the whole removal and installation process of a 2003 2004 2005 2006 2007- 2009 Kia Cerato car radio. If there are any problems you cannot deal with independently, you can turn to your dealer or a professional for help. But if you still think the whole upgrade process is too complicated for you, you can directly arrange a technician to help you install the new car radio.
Anyway, before installation, please confirm that you’ve already got an ideal car radio. If not, you might as well check out the following link which is an amazing 2003 2004 2005 2006 2007- 2009 Kia Cerato car radio from Seicane.
This car radio, based on the advanced Android 6.0 operation system and a high-quality 8 – Core 1.5 GHz Coretex-A53 processor, is advanced enough to be an ideal replacement for your factory radio.
When you drive around an unfamiliar place, taking advantage of the high-end 3D GPS navigation function makes it easier for you to quickly locate where you are and accurately navigate to your desired destinations through turn-by-turn direction and voice prompts. And additionally, you can also listen to your favorite music while navigating thanks to this unit’s dual zone function.
Additionally, the wireless Bluetooth technology enables you to connect your Bluetooth-enabled mobile phone to this car radio, so you can dial, receive, reject or mute Bluetooth hands-free calls as well as listen to streaming music from your phone music playlists, which can make your trip be full of both convenience and enjoyment
Wish you like this unit and good luck to you!