This is the head unit after installation,bluetooth dvd player with gps nav system of 2006-2010 OPEL Zafira.
Facts shows that there are more and more people are upgrading their audio system of their cars.
Because more advanced and convenient stereos attract us with its nicer appearance and economic
functions equipped.And this above image is one of them which suits 2006-2010 OPEL Zafira.
You may be very busy and want to make your OPEL Zafira bluetooth dvd installation more professional,
you can go to corresponding shop and ask a technical worker to achieve it.
Or some of you may want to do it yourself if it’s possible.The answer is yes,you can install it yourself when
you have known clearly about how to install 2006-2010 OPEL Zafira bluetooth dvd with 3G WiFi CD
changer.Here is a video which shows you how to operate this new unit:
At the same time,though you are the owner of other cars,that will matter a lot,because many modern
stereos probably can be installed in several cars.Maybe this unit in the picture also fits your car.If it doesn’t,
you can also read this essay carefully for you can take it as reference.Because the principles of radio upgrade
are mostly same.Next comes to easy steps of audio replacement.
2006-2010 OPEL Zafira original radio removal and bluetooth dvd installation:
1.There are four small holes on the unit,insert two removal tools into the holes
2.Bend the tools a little and pull out the stereo at the same time
3.Disconnect cables behind the unit
4.Take out a screw and put wires in inner place
5.Use a pry tool to lever top of the trim panel,release and remove it
6.When you take out the panel,you will find a lot of cables are also taken out.Then you connect antennas
as the pictures show:
7.Pull out the side panel a little with a screwdriver,then make lower side panel off which is in front of file
8.Insert long red wire down through the side fasten panel,then up through removed panel in front of file,firm the side panel
9.Make wires connected as the picture show,tidy all of them into the space
10.Plug long red cable to right place
11.Make it connected to removed small panel in front of file and cover it
12.Connect adapters,cables between new unit and the car
13.Then connect that two outside wires to back of new unit,install new radio into it,and cover removed panel on the dvd player
So the whole procedure for car stereo installation is over and we can see that removal work is very simple
when we have right removal tools.However when we want to mount it,it become a little complex when we
are making cables connection.You can learn it well by viewing some messages from the Internet,for example:
If you are not very sure,you can ask someone who are professional to help you,that may be quicker.
Some notes after installation:
1.Please don’t feel too excited after you succeed finishing the job,or it may cause some damage to car or even
2.Please don’t pay too much attention to new gps dvd especially when you are driving on a complex road
3.In order to ensure the head unit can be used longer,do not use any chemicals to wipe it or spill any liquid
For more choices about radios for all kinds of cars,maybe you can find what you want from next website:
an article for it.