http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

Category Archives: Mazda car DVD

A simple installation guide for a 2014 MAZDA ATENZA 6 radio with Bluetooth Capacitive Touch Screen AUX 3G WiFi HD 1080P Video USB SD

As the improvement of all aspects in life, more and more car owners pay attention to a more comfortable in-car life. To pursue that, can owners can easily upgrade their car radio with a modern head unit which usually can be compatible with most up-to-date features. In order to help you install your new head unit, I’d like to introduce the detailed installation guide about a 2014 MAZDA ATENZA 6 radio from Seicane to you, you can refer to it for the installation of f your new unit.

2014 MAZDA ATENZA 6 radio after installation

2014 MAZDA ATENZA 6 radio after installation

 

 

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

 

2014 MAZDA ATENZA 6 radio installation guide

1·Remove the original console panel with a lever, pry gently along the gap and pick up the panel. Then set it aside.

1. Remove the original console panel with a plastic knife

1. Remove the original console panel with a plastic knife

 

2·Remove the four screws that fixed the radio on the dashboard. Removing these screws will not be a difficult job.

2. Remove the four screws that fixed the radio on the dashboard

2. Remove the four screws that fixed the radio on the dashboard

 

3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

3. Pull the factory radio out of the dash

3. Pull the factory radio out of the dash

 

4·Unplug the connectors.

4. Unplug the connectors

4. Unplug the connectors

 

5·Remove the brackets on both sides of the factory radio. So far the removal of the factory radio is completed. Next steps will move on to the installation of the Seicane radio.

5. Remove the brackets on both sides of the factory radio

5. Remove the brackets on both sides of the factory radio

 

6·Install the brackets on both sides of the Seicane radio.

 

7·Dock the connectors of the original vehicle and the upgraded car audio.

7. Dock the connectors of the original vehicle and the upgraded car stereo

7. Dock the connectors of the original vehicle and the upgraded car stereo

 

8·Insert the wires to the appropriate location of the upgraded head radio. If you are not sure about how to wire correctly, you may refer to the wiring diagram for details.

 

9·Fix the Seicane radio with the four screws.

9. Fix the Seicane stereo with the four screws

9. Fix the Seicane stereo with the four screws

 

10·Firm the console panel. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

10. Firm the console panel

10. Firm the console panel

 

 

All in all, you need to make clear every step before you start your job. If you don’t have any experience on how to install a new radio before, then it’s suggested you have a professional for help. If there is any questions during the whole process, you can ask your dealer. However, if you don’t have an ideal car radio, you are recommend to have a careful look at this high quality 2014 MAZDA ATENZA 6 radio from Seicane, which is a great choice for you to upgrade your factory radio to high configurations. Please click:

 

http://www.seicane.com/10-inch-oem-android-radio-gps-navigation-system-for-2014-mazda-atenza-6-with-bluetooth-capacitive-touch-screen-tpms-dvr-obd-ii-rear-camera-aux-3g-wifi-hd-1080p-video-headrest-monitor-control-usb-sd-s088699

 

This intelligent MAZDA ATENZA 6 radio comes with an amazing 10 inch 1024*600 multi-touch screen while you are heading to your desired destination with the turn-by-turn direction and voice prompts. It also comes with bluetooth technology for you to wirelessly pair with your enabled cell phone for hands-free calls so as to have a safe and pleasant journey.

 

Wish you like this popular MAZDA ATENZA 6 radio and have a wonderful time with it on all your way to a lot of locations! Good luck to you!

 

 

Posted in Mazda car DVD. Tagged with .

A step-by-step installation guide for a 2012 2013 MAZDA CX-5 car radio with Bluetooth Touch Screen HD 1080P Video USB SD

To enjoy much convenience and enjoyment at the same time in your car, you just need to upgrade your factory radio with a modern car radio. And some car owners are curious that if it is hard to install a new radio. Actually, it’s not too difficult to install a new car radio. The article below is a step-by-step 2012 2013 MAZDA CX-5 car radio installation guide from Seicane. Wish it can be helpful with the installation of your new radio.

2012 2013 MAZDA CX-5 car radio after installation

2012 2013 MAZDA CX-5 car radio after installation

 

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

 

 

2012 2013 MAZDA CX-5 car radio installation guide

1·Remove the original console panel with a plastic knife, pry gently along the gap and pick up the panel. Then set it aside.

1. Remove the original console panel with a plastic knife

1. Remove the original console panel with a plastic knife

 

2·Remove the four screws that fixed the radio on the dashboard. Remove these screws will not be a difficult job.

2. Remove the four screws that fixed the radio on the dashboard

2. Remove the four screws that fixed the radio on the dashboard

 

3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

3. Pull the factory radio out of the dash

3. Pull the factory radio out of the dash

 

4·Unplug the connectors.

4. Unplug the connectors

4. Unplug the connectors

 

5·Remove the brackets on both sides of the factory radio. So far the removal of the factory radio is completed. Next steps will move to the installation of the Seicane radio.

5. Remove the brackets on both sides of the factory radio

5. Remove the brackets on both sides of the factory radio

 

6·Install the brackets on both sides of the Seicane radio

 

7·Dock the connectors of the original vehicle and the upgraded car audio.

7. Dock the connectors of the original vehicle and the upgraded car audio

7. Dock the connectors of the original vehicle and the upgraded car audio

 

8·Insert the wires to the appropriate location of the upgraded head radio. If you are not sure about how to wire correctly, you may refer to the wiring diagram for details.

 

9·Fix the Seicane radio with the four screws.

9. Fix the Seicane radio with the four screws

9. Fix the Seicane radio with the four screws

 

10·Firm the console panel. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

10. Firm the console panel

10. Firm the console panel

 

 

After reading this installation guide for MAZDA CX-5 car radio, you probably have a general idea about how to install your new radio. If you have any questions, please consult your dealer or a professional. Be clear every step before you start to install. If you want o find an ideal radio for your car, you are welcome to click the following link which is about a MAZDA CX-5 car radio from Seicane:

 

http://www.seicane.com/9-inch-oem-android-radio-gps-navigation-system-for-2012-2013-2014-mazda-cx-5-with-bluetooth-capacitive-touch-screen-tpms-dvr-obd-ii-rear-camera-aux-3g-wifi-hd-1080p-video-headrest-monitor-control-usb-sd-s088697

 

This pioneer MAZDA CX-5 car radio comes with advanced configurations and an appealing interface for you to upgrade your factory radio. The turn-by-turn direction and voice prompts provided by its GPS navigation system can guide you to a variety of locations on time. A journey with security and enjoyment will be always with you when you simply pair with your enabled cell phone via the built in Bluetooth technology.

Posted in Mazda car DVD. Tagged with .

Specific upgrade instructions for 2012-2014 Mazda CX-7 Radio GPS navigation system

Look at this image, is it similar to your car’s dashboard? If you say yes, you must be the owner of Mazda CX-7.

2012-2014 Mazda CX-7 dashboard

2012-2014 Mazda CX-7 dashboard

Having such a nice car, do you want to improve your driving experience and gain your entertainment? Just do it from upgrade your Mazda CX-7 Radio. Some of you might have try to do it but failed. Today I’d like to share the specific instructions of radio upgrade with you.

 

2012-2014 Mazda CX-7 Radio removal

1·Start by using a thin pry tool to removing the silver trim around the radio.

2012-2014 Mazda CX-7 Radio removal step 1

2012-2014 Mazda CX-7 Radio removal step 1

2·Next cover the A/C controls on shift lever with tape and remove the two screws holding the black dash piece around the radio, then remove the dash piece.

2012-2014 Mazda CX-7 Radio removal step 2

2012-2014 Mazda CX-7 Radio removal step 2

2012-2014 Mazda CX-7 Radio removal step 3

2012-2014 Mazda CX-7 Radio removal step 3

3·Disconnect the one wire harness from the dash piece.

2012-2014 Mazda CX-7 Radio removal step 4

2012-2014 Mazda CX-7 Radio removal step 4

4·Then remove the four screws and one 10mm boll holding in the radio.

 

2012-2014 Mazda CX-7 Radio removal step 5

2012-2014 Mazda CX-7 Radio removal step 5

2012-2014 Mazda CX-7 Radio removal step 6

2012-2014 Mazda CX-7 Radio removal step 6

5·Disconnect the radio’s wire harnesses and the hazard light harness then remove the radio.

2012-2014 Mazda CX-7 Radio removal step 7

2012-2014 Mazda CX-7 Radio removal step 7

6·Bring the radio to the seat and carefully remove the hazard light switch.

2012-2014 Mazda CX-7 Radio removal step 8

2012-2014 Mazda CX-7 Radio removal step 8

7·There are two clips on the top and bottom of the switch which are easy to break. You should pry them off carefully with a pry tool.

2012-2014 Mazda CX-7 Radio removal step 9

2012-2014 Mazda CX-7 Radio removal step 9

8·Now use a small flat head screwdriver to remove the hazard light harness.

2012-2014 Mazda CX-7 Radio removal step 10

2012-2014 Mazda CX-7 Radio removal step 10

The radio has been removed now, after few minutes rest, we can start to install the new Mazda CX-7 Radio.

By the way, there is a good aftermarket radio which was installed on my Mazda CX-7:

http://www.seicane.com/autoradio-android-gps-navigation-system-for-2012-2013-2014-mazda-cx-7-with-dvd-player-mirror-link-multi-touch-screen-obd-dvr-bluetooth-rear-view-camera-tv-usb-sd-3g-wifi-ipod-s167007

 

If you don’t know which aftermarket radio is better, this unit can be a good choice for you. It has intelligent pure android 4.4.4 operation system and 7 inch HD 1024*600 multi-touch screen.

You can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet, download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, Gmail etc. And it is his perfect road companion.

 

2012-2014 Mazda CX-7 Radio installation

1·Place the hazard light switch and its harness onto the new aftermarket radio.

2·Now mount the GPS antenna on the outside of the Mazda CX-7, mounting the antenna on the inside of the car may cause it to work improperly.

3·Then connect the new aftermarket radio adaptor harness, the AM/FM adaptor harness, and all optional harnesses.

4·Connect the new aftermarket radio to the harnesses and place it in the dash.

 

What are you waiting for? Improve the quality of car life with your Mazda CX-7. Just install a new aftermarket Mazda CX-7 Radio. Wish you can learn something form this blog.

Posted in Mazda car DVD, Uncategorized. Tagged with .

How to mount 2009 2010 2011 Mazda CX-7 radio gps with touch screen

What points do you hold about removing an original car radio of Mazda CX-7 and upgrade a more advanced one?Many people may say of course because everyone likes things to be convenient.But I guess you have the problem of this operation.Don’t worry about it,in fact the whole process may only take about few minutes to finish car stereo removal.And it won’t be big difference when you are willing to install the unit for your Mazda CX-7 by yourself,you’d better do it according to installation guidance about how to mount 2009 2010 2011 Mazda CX-7 radio gps with touch screen.Or,the new unit may not work well in your car.

During this process you may need some tools for the mount, such as a screwdriver, a lever and so on.The next part are the installation steps for it,before you begin your actions please apply the parking brake and remove negative cable on car battery to make sure your safety.

And attention that before you start up to install Mazda CX-7 radio gps,

1.Please read the installation instructions carefully from the dealer if you have it

2.Please mind to connect the new unit antennas to right positions,this is very important

Now comes to mount steps,you can take these as references:

1.Pry edges of trim panel with a firm lever

pry lower edge of trim panel with a firm lever

pry lower edge of trim panel with a firm lever

pry overhead edge of trim panel with a firm lever

pry overhead edge of trim panel with a firm lever

2.Remove trim panel after it is fastened totally

remove trim panel after it is fastened totally

remove trim panel after it is fastened totally

3.Remove these four screws which lay two on each side with a scrwdriver

remove these four screws which lay two on each side with a scrwdriver

remove these four screws which lay two on each side with a scrwdriver

4.Take out original CD player and unplug cables that connected them

take out original CD player

take out original CD player

unplug cables that connected them

unplug cables that connected them

5.Use a screwdriver remove four screws,two as the picture show,and other two on the other side

use a screwdriver remove four screws,two as the picture show,and other two on the other side

use a screwdriver remove four screws,two as the picture show,and other two on the other side

6.And then take out these two screws and get down the cable

take out these two screws and get down the cable

take out these two screws and get down the cable

7.After these you can remove dashboard away from white part

remove dashboard away from white part

remove dashboard away from white part

This is the removal part and the next installation of car dvd player is easier.

8.Connect new unit with dashboard by plugging antennas correctly and firming screws

9.Put cables and the dvd player in,firm four screws that are set aside before

10.Cover your radio with trim panel and turn on new radio to check whether your operations are all right

Here is a picture of new unit after installation,dvd player with gps bluetooth music of 2009 2010 2011 Mazda CX-7.It can be installed in most cars which radio’s dashboard of it is like this one.

new unit after installation,dvd player with gps bluetooth music of 2009 2010 2011 Mazda CX-7

new unit after installation,dvd player with gps bluetooth music of 2009 2010 2011 Mazda CX-7

 

I advice you to install the car unit according to right steps in order to ensure that your radio nav system can be used longer.This advanced car radio will surely make your usual life more colorful with new functions and good maintance.It’s normal that you meet some problems that can’t solve by yourself,at that time you can visit websites for help include the next one:http://www.seicane.com/lcd-touch-screen-gps-radio-replacement-for-2009-2010-2011-mazda-cx-7-with-dvd-player-3g-wifi-bluetooth-music-dvr-steering-wheel-control-hd-1080p-ipod-iphone-aux-mp3-c097.

It’s not right for you to be careless on the road because you think you have owned a very best dvd player,still remember that being safe is key to enjoy everything.Therefore do not pay too much attention to your new unit when  you car driving.

Posted in Mazda car DVD. Tagged with , , .