http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

Category Archives: Jeep car DVD

How to upgrade a 2007 Jeep Patriot head unit with Bluetooth Music TV IPOD IPhone USB SD MP3 AUX Rearview Camera

Now please look at the following picture, it looks quiet pretty, doesn’t it? It’s a picture taken after a new Seicane 2007 Jeep Patriot head unit is installed in a car. You may worry that it’ s too hard to install it in your car, so some of you may choose to go to a head unit upgrade center to have it installed, some may ask a professional for help. No matter which way you choose, the installation instruction can be much helpful for you. The following is a professional Jeep Patriot head unit installation instruction from Seicane, you can refer to it for the installation of your new head unit.

2007 Jeep Patriot head unit after installation

2007 Jeep Patriot head unit after installation

 

Tips about the installation:

 

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2007 Jeep Patriot head unit installation guide

 

1.Loosen the trim panel with a lever.

1.Loosen the trim panel with a lever

1.Loosen the trim panel with a lever

 

2.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

 

3.Remove the four screws which are holding the original radio with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

 

4.Take out the original radio and disconnect the wire harness at the back of the original radio.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

 

5.Check all the accessories for the new Seicane unit.

5.Check all the accessories for the new Seicane car radio.

5.Check all the accessories for the new Seicane car radio.

 

6.Connect the Seicane unit to your original car radio ‘s plugs.

6-1. Connect the Seicane car stereo to your original car radio 's plugs.

6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-2. Connect the Seicane car stereo to your original car radio 's plugs.

6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-3. Connect the Seicane car stereo to your original car radio 's plugs.

6-3. Connect the Seicane car stereo to your original car radio ‘s plugs.

 

7.Put the new Seicane unit into the dash.

7.Put the new Seicane stereo into the dash.

7.Put the new Seicane stereo into the dash.

 

8.Turn on the new radio and have a test if the new Seicane unit is working without problem..

9.Put trim panel back on your new Seicane unit after the normal test.

 

All the installation instruction about a 2007 Jeep Patriot head unit is shown on the above. If you have any question during the whole process, you can consult your dealer. If you are a green hand on the installation, you’ d better ask a professional for help.

 

In order to have a successful upgrade, it’s necessary for you to check the compatibility of your new unit. If you have no idea about this, you can refer to this amazing 2007 Jeep Patriot head unit from Seicane, please click for more details:

 

http://www.seicane.com/aftermarket-radio-gps-dvd-player-for-2002-2007-jeep-grand-cherokee-liberty-patriot-wrangler-with-bluetooth-music-tv-ipod-iphone-usb-sd-mp3-aux-rearview-camera-t6015

 

This 2007 Jeep Patriot head unit comes with a large 5 inch multi-touch screen for you to have an easier operation and a clearer viewing. To find your way to any location with ease, you can utilize the 3D GPS navigation system of high precision to get turn-by-turn direction, route planning and spoken guidance. It also features the bluetooth technology for you to sync with your enabled mobile phone to make and receive hands-free calls and stream music.

 

To have an extraordinary driving experience, this popular 2007 Jeep Patriot head unit is just your best choice. Why not take it right now and have a wonderful time with it?

Posted in Jeep car DVD. Tagged with .

How to install a 2008 2009 2010 Jeep Commander Radio with 9 steps

As a matter of fact, many Jeep Commander owners have upgraded their factory Jeep commander Radio with a powerful aftermarket radio to make their in-car environment to next level. Some of them even install it by themselves. Actually, the installation of a new head unit is not so complicated that you can do it by yourself if you have the detailed guide. But if you don’t install a head unit before, you’d better do it with the help of a professional technician in case of some irreparable damage is being made. The following is the detailed instructions about how to install a 2008-2010 Jeep Commander Radio in a correct way.

This is the Seicane 2008-2010 Jeep Commander Radio after installation.

2008-2010 Jeep Commander Radio after installation

2008-2010 Jeep Commander Radio after installation

If you have the same dashboard with the picture shows, you can follow the instructions below.

 

 

Precautions before installation:

1.Before you begin any work, remember to disconnect negative power cable to avoid danger

2.Please turn off your car series include the radio unit and park your car well.

3.Before connecting, please make sure the ignition is off to avoid short circuit and connect the yellow and res cable at last.

 

2008-2010 Jeep Commander Radio installation

1)Pry the trim panel with a pry tool.

2008-2010 Jeep Commander Radio installation step 1

2008-2010 Jeep Commander Radio installation step 1

2)Remove the trim panel and disconnect cables at the back of it.

2007 2008 2009 2010 Chrysler Sebring head unit installation step 2-2

2007 2008 2009 2010 Chrysler Sebring head unit installation step 2-2

3)Remove 4 screws holding the unit with a screw removal tool.

2008-2010 Jeep Commander Radio installation step 3

2008-2010 Jeep Commander Radio installation step 3

4)Gently take out factory radio and disconnect cables at back of it.

2008-2010 Jeep Commander Radio installation step 4

2008-2010 Jeep Commander Radio installation step 4

5)Connect the cables on the new head unit as the user manual shows and place them well.

2008-2010 Jeep Commander Radio installation step 5-1

2008-2010 Jeep Commander Radio installation step 5-1

2008-2010 Jeep Commander Radio installation step 5-2

2008-2010 Jeep Commander Radio installation step 5-2

2008-2010 Jeep Commander Radio installation step 5-3

2008-2010 Jeep Commander Radio installation step 5-3

6)Put the new head unit into the dash.

2008-2010 Jeep Commander Radio installation step 6

2008-2010 Jeep Commander Radio installation step 6

7)Turn on the new head unit and have a comprehensive check if it works well.

8)Install 4 screws back to their original position.

8)Check whether the unit is working without problem.

9)If everything is OK, firm removed screws that are put aside, then make trim panel back on your new Seicane radio.

 

By the way, you should make sure whether the aftermarket radio fits your car before installation, and here is a good aftermarket radio of Seicane which fits Jeep Commander well:

http://www.seicane.com/seicane-s126061-cheap-800-480-touch-screen-android-4-4-4-gps-navigation-car-stereo-audio-system-for-2008-2009-2010-jeep-commander-with-radio-dvd-player-bluetooth-music-3g-wifi-mirror-link-obd2-backup-camera-steering-wheel-control

This Seicane Jeep Commander Radio can be a good choice for you. It has intelligent pure android 4.4.4 operation system and 6.2 inch HD 800*480 multi-touch screen.

You can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet, download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, Gmail etc. And it is your perfect road companion.

 

New Jeep Commander Radio has been installed, have fun with your Jeep Commander on your trip!

Posted in Jeep car DVD. Tagged with .

How to remove 2009 2010 2011 Jeep Compass CD radio with audio system

Do you have a car of 2009 2010 2011 Jeep Compass?Nowadays many car owners are seeking out an answer for how to remove 2009 2010 2011 Jeep Compass CD radio with audio system for self installation.It is a fact that many people have installed new head unit for their cars smoothly,it shows that radio removal and installation is not a very trouble thing.

When you are not satisfied with factory stereo,you may go to the market and buy one to upgrade the CD radio.But after you have entered a shop with various kinds of stereos,you feel confused and have no idea to choose one.Don’t worry,I think you can have a look at following picture first:head unit after installation,car stereo autoradio with gps navigation bluetooth of 2009 2010 2011 Jeep Compass.Then I will show you how to choose a suitable one with your car.

head unit after installation,car stereo autoradio with gps navigation bluetooth of 2009 2010 2011 Jeep Compass

head unit after installation,car stereo autoradio with gps navigation bluetooth of 2009 2010 2011 Jeep Compass

The key point to know whether this unit can be installed in your car is to compare panel of the players.If the space after your CD player is removed is just for a new one,then that one is what you need.And this essay is still worth to read though this stereo in the picture is not right for you,because you can take it as references.

Before you really start removal for Jeep Compass CD radio,you can view next video first.It’s about usage for new features of the radio,which will bring you a roughly understanding of it.

With a better understanding of bluetooth dvd,many people can’t wait to upgrade their car stereos.Ok,the following part will show you how to achieve this object.

2009 2010 2011 Jeep Compass autoradio removal and installation:

1.The original car stereo of Jeep Compass

the original car stereo of Jeep Compass

the original car stereo of Jeep Compass

2.Use a lever,pry the edges around trim panel to release it

use a lever,pry the edges around trim panel to release it

use a lever,pry the edges around trim panel to release it

3.Take trim panel out,unplug antennas behind it

take trim panel out,unplug antennas behind it

take trim panel out,unplug antennas behind it

4.Use a screw removal tool,remove 4 screws,2 screws on each side

use a screw removal tool,remove 4 screws

use a screw removal tool,remove 4 screws

5.Gently remove factory radio and disconnect cables behind it

gently remove factory radio and disconnect cables behind it

gently remove factory radio and disconnect cables behind it

Removing factory stereo is finished with above 6 steps,and you will find that it’s simple to do it when you have prepared removal tools and do it as right guide.And there are still about 3 steps to accomplish it.

6.Connect and plug all wires step by step as following pictures show

plug antennas,cables and connectors1

plug antennas,cables and connectors1

plug antennas,cables and connectors2

plug antennas,cables and connectors2

plug antennas,cables and connectors3

plug antennas,cables and connectors3

7.Then put new unit into right space,and you’d better have a tidy for the wires because the space is limited

put new unit into right space

put new unit into right space

8.After you have mounted new stereo in the space,then firm 4 screws to the place beside dvd player and cover trim panel on the surface of car radio.

With all these done,you can turn on your new autoradio and watch the screen,it demonstrates that your installation is all right if it can work out.You can start your car with it and have a full experience on its new screen and functions.But if not,I guess there is something wrong during your connection or you left some objects that is necessary.

At this kind of time,at first you can comfirm that whether your bought head unit is all right.Secondly,if there is nothing wrong with the unit then I advise you to check cables connection again.Once one of them is not right,it will lead to stereo’s out of work.Therefore when you are doing this,you should be very careful and you’d better check again after connection to avoid removing Jeep Compass CD radio and installing gps radio once again.

Some people may say they don’t know the new unit very well,and need more specific information about it.Ok,you can visit the following website for help:http://www.seicane.com/2009-2010-2011-jeep-compass-sat-nav-radio-replacement-dvd-tv-bluetooth-music-pop-aux-backup-camera-hd-1080p-video-ipod-usb-sd-c202,and it will provide you very clear details.

 

 

Posted in Jeep car DVD. Tagged with , , .