Installation Guide for a 2003 2004 2005 2006 2007 2008 Old Mazda 6 Bluetooth GPS Sat Nav Car Radio

132 views

There is no doubt that an ideal car radio can be compatible with a wide range of comprehensive features to satisfy your different needs. Are you planning to remove your factory radio and install a new car radio for your 2003 2004 2005 2006 2007 2008 Old Mazda 6? If yes, you may refer to the following 2003 2004 2005 2006 2007 2008 Old Mazda 6 car radio installation instruction from Seicane. Wish you can get some help from it.

2003 2004 2005 2006 2007 2008 Old Mazda 6 Car Radio after installation

2003 2004 2005 2006 2007 2008 Old Mazda 6 Car Radio after installation

4 tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2003 2004 2005 2006 2007 2008 Old Mazda 6 car radio installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Above is the whole removal and installation process for a 2003 2004 2005 2006 2007 2008 Old Mazda 6 car radio. If you meet any difficulties you cannot overcome independently, you can turn to your dealer or a professional for help. However, if you have no experience in installing a car radio, it is suggested that you go to a car radio upgrade center to arrange a professional technician to help you install the new car radio. To help you find a suitable car radio, here I would like to recommend a remarkable 2003 2004 2005 2006 2007 2008 Old Mazda 6 car radio from Seicane to you. For more details, please click:

https://www.seicane.com/hd-touch-screen-android-radio-for-2003-2008-old-mazda-6-with-gps-navigation-audio-system-1080p-video-bluetooth-music-3g-wifi-usb-obd2-mirror-link-s0478

This car radio comes with a large 10.1 inch HD touch screen to help you gain a perfect view. It is running on the intelligent and stable Android 6.0 operation experience and a high-quality quad-core processor, so you must be surprised by its smoother and faster operation.

With the assistance of the text-to-speech guidance offered by the high-accuracy worldwide real-time GPS navigation system, it is much easier for you to know your current locations and find the right way to arrive at your desired destinations. Besides, thanks to this unit’s dual zone function, you can freely listen to your favorite music while navigating, and the music will automatically switch to GPS voice.

Don’t hesitate to take it along with your driving if you like it!

Related Posts

Posted in Uncategorized. Tagged with .

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>