Installation guide for 2010 2011 2012 2013 Subaru Legacy dvd navigation with bluetooth music

630 views

car stereo autoradio after update,gps dvd with sat nav system touch screen of 2010 2011 2012 2013 Subaru Legacy

car stereo autoradio after update,gps dvd with sat nav system touch screen of 2010 2011 2012 2013 Subaru Legacy

You may have seen this head unit before when you are shopping in a car market.But you are confused which one to choose or you are not sure which one is suitable for your car.Don’t worry,I will tell you methods to make a decision for this next paragraph,and the point of this article is to show installation guide for 2010 2011 2012 2013 Subaru Legacy dvd navigation with bluetooth music.

Comparing your owned radio panel with this one,it can be installed in your car if they are in same size and appearance.It doesn’t mean whole dashboard,just panel which covers space for stereo.So it should be very possible that this unit is suitable for your car for it can be considered a normal radio,especially when you are the owner of Subaru Legacy.

Before telling about whole procedure about Subaru Legacy car dvd installation,there are some tips for you to attention.

Precautions before installation:

Firstly, if you have installation instructions from the dealer,please read it carefully

Secondly,you should turn off all affairs of car and make sure that you have finished parking series

Thirdly,please remember to disconnect negative connector to ensure your safety

With attentions on all of them,next we will learn how to remove original stereo and install Subaru Legacy dvd navigation.

2010 2011 2012 2013 Subaru Legacy CD radio removal:

1.Pull this handle out by unscrewing it

Pull this handle out by unscrewing it

Pull this handle out by unscrewing it

2.Pry trim panel with a tool as picture show to release it(but not to remove)

Pry trim panel with a tool as picture show to release it

Pry trim panel with a tool as picture show to release it

3.Remove panel surrounded it

Remove panel surrounded it

Remove panel surrounded it

4.Prize edges of outside trim panel and remove it,disconnect cable connected it

Prize edges of outside trim panel and remove it,disconnect cable connected it

Prize edges of outside trim panel and remove it,disconnect cable connected it

5.Use a screwdriver,remove 2 screws

Use a screwdriver,remove 2 screws

Use a screwdriver,remove 2 screws

6.After that,you can pull out two side trim panels

pull out two side trim panels

pull out two side trim panels

7.Remove 5 screws which is beside stereo,one side has 2 ,and the other side has 3,then you can remove original player and unplug cables beside it

Remove 5 screws which is beside stereo,one side has 2 ,and the other side has 3

Remove 5 screws which is beside stereo,one side has 2 ,and the other side has 3

remove original player and unplug cables beside it

remove original player and unplug cables beside it

8.Remove surface panel of CD  from the unit,but before it you should remove screws on original unit first

Remove surface panel of CD  from the unit

Remove surface panel of CD from the unit

2010 2011 2012 2013 Subaru Legacy new radio installation:

Before starting mount of gps radio,we can have a look at following video first and it will give us intuitive things including how to operate new features:

9.Do connections on cables and antennas as following pictures show

Do connections on cables and antennas

Do connections on cables and antennas

Do connections on cables and antennas2

Do connections on cables and antennas2

Do connections on cables and antennas3

Do connections on cables and antennas3

10.After connection,mount trim panel on radio and leave one cable outside panel

mount trim panel on radio and leave one cable outside panel

mount trim panel on radio and leave one cable outside panel

11.Make round red connector connected  to upper right side of the panel

Make round red connector connected  to upper right side of the panel

Make round red connector connected to upper right side of the panel

12.Connect outside cable with  new radio

Connect outside cable with  new radio

Connect outside cable with new radio

13.Install new unit into right position

Install new unit into right position

Install new unit into right position

14.Firm removed screws and install panels to their primary places

Firm removed screws and install panels to their primary places

Firm removed screws and install panels to their primary places

You will surely accomplish this installation for Subaru Legacy dvd navigation only if you can do it as mount instructions say,everything needs guidance when we have no experience on it,so it is.If there still occur some problems,then you should think about whether some of your operation to car head unit is wrong or you forget to keep something back.You can also ask someone who works in this market for help. Visit a website and there will be someone to help you solve your problems is a not bad choice,for example:http://www.seicane.com/car-bluetooth-radio-upgrade-sat-nav-system-specialized-for-subaru-legacy-built-in-dvr-3-zone-pop-fm-am-hd-radio-tuner-with-gps-dvd-3g-wifi-c061-1,it will give you more details about new radio too.

I have written an article which is about upgrade of Subaru Outback radio,if you also have doubts about it you can go to visit it and may get what you want.

 

Related Posts

Posted in Subaru car DVD. Tagged with , , .

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>