http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

Category Archives: Hyundai car DVD

11 steps to install a 2009-2014 Hyundai IX35 Radio

Look at this picture, this is Seicane 2009-2014 Hyundai IX35 Radio after installation.

2009-2014 Hyundai IX35 Radio after installation

2009-2014 Hyundai IX35 Radio after installation

Do you think it’s awesome? And want to install it on your Hyundai IX35 Radio? Hyundai IX35 is becoming more and more popular. If you are owners of Hyundai IX35, and you want to upgrade your factory radio. You can read this essay patiently. I will tell you the instructions of Hyundai IX35 Radio installation. If you have the same dashboard with the picture shows, you can follow the instructions below.

 

2009-2014 Hyundai IX35 Radio installation

1·First pry off the top panel with plastic tools and set it aside.

2009-2014 Hyundai IX35 Radio installation Step 1

2009-2014 Hyundai IX35 Radio installation Step 1

2·Next remove two screws with a Phillips screwdriver as the picture shows.

2009-2014 Hyundai IX35 Radio installation Step 2

2009-2014 Hyundai IX35 Radio installation Step 2

3·Pry off the control panel with plastic tool and flat screwdriver.

2009-2014 Hyundai IX35 Radio installation Step 3

2009-2014 Hyundai IX35 Radio installation Step 3

4·Unplug connectors behind the control panel.

2009-2014 Hyundai IX35 Radio installation Step 4

2009-2014 Hyundai IX35 Radio installation Step 4

5·Then remove two screws with a Phillips screwdriver as the picture shows.

2009-2014 Hyundai IX35 Radio installation Step 5

2009-2014 Hyundai IX35 Radio installation Step 5

6·Pull out the factory radio slowly.

2009-2014 Hyundai IX35 Radio installation Step 6

2009-2014 Hyundai IX35 Radio installation Step 6

7·Disconnect the original harness and set the factory radio aside.

2009-2014 Hyundai IX35 Radio installation Step 7

2009-2014 Hyundai IX35 Radio installation Step 7

8·Make antennas and cables connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect whole procedure.

9·Connect the new radio to your Hyundai IX35, you should check whether your connections are correct, the new unit is in right position, and you’d better have a tidy for the cables.

10·Check whether the unit is working without problem.

11·If everything is OK, firm removed screws that are put aside, then make trim panel back on your new Seicane Hyundai IX35 Radio.

 

By the way, you should make sure whether the aftermarket radio fits your car before installation, and here is a good aftermarket radio of Seicane which fits Hyundai IX35 well:

http://www.seicane.com/seicane-s127013-quad-core-radio-bluetooth-in-dash-car-gps-system-for-2009-2014-hyundai-ix35-with-16g-flash-3g-wifi-mirror-link-obd2-cd-dvd-player-auto-a-v-hd-1080p-video-backup-camera-aux-s127013

 

This Seicane Hyundai IX35 Radio can be a good choice for you. It has intelligent pure android 4.4.4 operation system and 7 inch HD 1024*600 multi-touch screen.

You can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet, download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, Gmail etc. And it is your perfect road companion.

 

Wish you can learn something from this essay, good luck to you! Have a good trip with your new Hyundai IX35 Radio.

Posted in Hyundai car DVD. Tagged with .

Simple 10 steps to install 2006 2007-2011 Hyundai Veracruze Radio with GPS navigation system

Look at this image, this is Seicane Hyundai Veracruze Radio after installation.

2006-2011 Hyundai Veracruze Radio after installation

2006-2011 Hyundai Veracruze Radio after installation

As we all know, Hyundai Veracruze is becoming a hot choice for more and more families. To be honest, factory radio of Hyundai Veracruze has few functions, you can only listen to radio and play CD. If you want to watch TV, play DVD or use navigation system, you must install a new aftermarket radio instead of the original one. I’ll share instructions of radio installation with you.

 

 

2006-2011 Hyundai Veracruze Radio installation

1·Remove each side vent panel of the radio with a plastic tool, then set vent panels aside.

2006-2011 Hyundai Veracruze Radio installation 1

2006-2011 Hyundai Veracruze Radio installation 1

2·Remove ten screws holding the trim panel in the dashboard with a screwdriver.

2006-2011 Hyundai Veracruze Radio installation 2

2006-2011 Hyundai Veracruze Radio installation 2

3·Pull out the whole console slowly with meduim force.

2006-2011 Hyundai Veracruze Radio installation 3

2006-2011 Hyundai Veracruze Radio installation 3

4·Then unplug the connectors behind it. And remove the factory radio from console.

5·Connect the original harness with new aftermarket radio cable adapter.

6·Lay the GPS antenna cable into a pillar.

7·Remove the holder kits from the original radio.

8·Fix the holder kits on Seicane aftermarket radio with screws.

9·Connect the original harness with cable adapter cable, connect the GPS antenna and radio antenna adapter.

10·Fix Seicane radio into the dash with screws, and put the trim panels back.

 

There is a important thing to tell you, you should choose a new aftermarket radio fits your car well before your radio installation. This is most important thing you should do first. And here is a good radio of Seicane which fits 2006-2011 Hyundai Veracruze:

http://www.seicane.com/oem-android-radio-gps-navigation-system-for-2006-2011-hyundai-veracruze-with-dvd-player-bluetooth-hd-1024-600-touch-screen-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-usb-sd-steering-wheel-control-mirror-link-s167023

 

This Hyundai Veracruze Radio has intelligent android 4.4 operation system, high quality RK3188 1.6 GHz Cortex A9 Quad-core CPU, and 8 inch HD 1024*600 multi touch screen with smooth operation high sensitivity. With 600Mhz Mali-400 MP4 GPU, it supports dual-screen display for the highest resolution of 2048*1536.

You can set any picture you like as wallpaper. The button backlight is also adjustable. You can dial, answer, reject and mute calls without taking your hands off the steering wheel. And you can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet, download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, Gmail etc and so on.

 

Good luck to you, have a good time with your new Hyundai Veracruze Radio and a great trip with your family!

Posted in Hyundai car DVD. Tagged with .

How to remove 2006-2011 Hyundai Elantra radio stereo audio system

New autoradio after installation,radio gps sat nav system of 2006-2011 Hyundai Elantra.

New autoradio after installation,radio gps sat nav system of 2006-2011 Hyundai Elantra

New autoradio after installation,radio gps sat nav system of 2006-2011 Hyundai Elantra

In modern society people are more likely to find more entertainments in daily busy life with faster and faster life rhythm,for we need to work hard for life but we need more learn to enjoy ourselves in daily life.A lot of people choose to buy a car because it’s very convenient when we are driving a car with a new radio.Do you have a Hyundai Elantra?Next I will show you details  about  how to remove 2006-2011 Hyundai Elantra radio stereo audio system.

Here are some tips for you that you should be careful about it,which can help you do a safer and better work.

Precautions before installation:

1.Please ensure that you have accomplished all parking affairs in order to make sure your safety

2.Before starting the removal process,please disconnect the negative battery cable

If you have interestes in it,then you can have a patient look at following installation guidance and wish you have a general idea about it.

2006-2011 Hyundai Elantra radio removal and installation:

1.Get trim panels out from each side of center console,you can do it with the help of a lever

Get trim panels out from each side of center console

Get trim panels out from each side of center console

2.Make out 4 screws  from trim panel

Make out 4 screws  from trim panel

Make out 4 screws from trim panel

3.Make ac vent controls out

Make ac vent controls out

Make ac vent controls out

4.Get 4 screwsout which secures radio chassis to sub dash

Get 4 screwsout which secures radio chassis to sub dash

Get 4 screwsout which secures radio chassis to sub dash

5.Take out the CD player

Take out the CD player

Take out the CD player

6.Disconnect cables behind radio

Disconnect cables behind radio

Disconnect cables behind radio

These 6 steps show us how to remove the original stereo,if you have finished smoothly,you may have a short rest and compare your removed CD radio with the one in the picture. It means that you can start to install Hyundai Elantra radio if they are same.

In fact this part is easier than front steps,you can take actions as following words:

Correctly connect the cables of new radio to cables of car,and you’d better do it after you are sure about how to make cables connection.After that,firm removed screws to fix the radio and place trim panels back to the dashboard.With all these done,you can turn on your installed autoradio and check whether all the functions can work or not.

What’s your work for car stereo replacement?If you have read it carefully,you will find that it’s not hard to remove the original stereo and replace a new one.

Of course,there will still meet some small problems for different cases.At that time,figuring out what the reason is or ask someone who knows better in this aspect for help,nothing will not be solved only if you have the desire to get it,especially when you have made enough preparations,for example,you can visit next website for detailed information and you can also contact dealers who works there:http://www.seicane.com/car-stereo-radio-upgrade-multimedia-dvd-navigation-for-hyundai-elantra-built-in-gps-bluetooth-aux-3g-wifi-auto-a-v-backup-camera-c036.

Attention please:

Easy doesn’t mean you can take it very easily,after all you are not professional,or it can a little dangerous.Please remember one tip that safety should be placed in front of anything,stop your job whenever you feel any danger.

It’s very normal for you to do some incorrect actions or didn’t attention something,so making adequate preparations for your Hyundai Elantra upgrade can be a very wise choice.

Posted in Hyundai car DVD. Tagged with , , .

How to remove 2009 Hyundai I20 radio with auto A/V aftermarket sat nav system

Do you know that car radio nowadays are upgrading very fast with higher drivers’ demands for car autoradio become higher.The designers for Hyundai I20 try their best to produce more advanced car stereos with the help of technology.So many people who owns a Hyundai I20 are glad to replace their car radios with a new unit after installatioin,aftermarket sat nav gps of 2009 Hyundai I20.You can have a look at this kind of unit for the car first,so the next problem may be how to remove 2009 Hyundai I20  radio with auto A/V aftermarket sat nav system?

new unit after installatioin,aftermarket sat nav gps of 2009 Hyundai I20

new unit after installatioin,aftermarket sat nav gps of 2009 Hyundai I20

Before you start up your installation,there are some tips to note:

1.Please turn off all car series functions include finish your parking series too

2.Please disconnect the negative battery cable before starting the removal process

3.Do not use any sharp objects to touch the touch screen,except for specialized touch screen pen

After you have taken these in mind,next we will see how to remove the original CD player and install a new unit.

1.Pry the lower part dashboard with a lever and add one on right direction step by step,and continue to right side until you can fasten the dashboard

pry the lower part dashboard with a lever

pry the lower part dashboard with a lever

add one on right direction step by step

add one on right direction step by step

continue to right side

continue to right side

2.Gently make right-side dashboard out,be careful and slow because the dashboard for it is tighter than normal one

gently make right-side dashboard out

gently make right-side dashboard out

3.After you have totally taken dashboard in center and right position away from the unit,you can remove the remaining part easily

remove the remaining part easily

remove the remaining part easily

4.This is the removal dashboard how it looks like inside

removal dashboard inside appearance

removal dashboard inside appearance

4.Disconnect cables that connected dashboard with the unit

disconnect cables that connected dashboard with the unit

disconnect cables that connected dashboard with the unit

5.Remove four screws which distributed two on each side

remove four screws which distributed two on each side

remove four screws which distributed two on each side

6.Gently take out original CD player

gently take out original CD player

gently take out original CD player

Now the removal process has been finished,the next step turns to installation work for Hyundai I20  radio:

7.Softly remove the trim panel of dashboard after you have removed screws on it,and install new radio to trim panel

8.Firm screws and mount it in car,make dashboard back coverd it,all operations for it have been finished

So what is your installation work going on?You will do a good job as if you have read it patiently and act as the removal guide.But it’s also possible for you to meet some different problems,which impeded you continue your work.It will not matter unless you broke something that is important or lose something.Any problems can be solved if you can make adequate preparations for it,such as surf the Internet for more useful information,for example,you can visit this website that will help you know clearer about new unit:http://www.seicane.com/2009-hyundai-i20-autoradio-gps-sound-system-dvd-cd-player-bluetooth-music-tv-tuner-wifi-3g-aux-pop-reverse-camera-usb-sd-ipod-iphone-dvr-hd-1080p-video-c030.You can also ask professional workers for detailed information.If you want to do it by yourself but meet troubles during it,after allyou can ask someone for help,you are not professional.

Please still remember that safety is the most important,make sure that it will safe and then you can start your job.If you install the head unit successfully,turn on the radio and cheak out whether all functions can operate or not,if not,cheak all steps you acted and find out the rason.

Posted in Hyundai car DVD. Tagged with , , .