If you would like to upgrade your car’s capabilities, you can consider replacing your factory radio with a new aftermarket car radio which can support a lot of practical and entertainment features. And as for the installation, if you have some related installation experience, you can refer to a correct installation guide to deal with the installation. The following is a 2004 2005 2006 2007 2008-2014 Ford F150 F250 F350 car radio installation guide from Seicane, which can be taken as your reference if you own the same or similar dashboard.
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2004 2005 2006 2007 2008-2014 Ford F150 F250 F350 car radio installation guide
Step 1: Remove the trim around gear shifter.
Step 2: Remove screws securing center console lid with a screwdriver.
Step 3: Remove the center console trim.
Step 4: Remove console side panels on both driver and passenger sides.
Step 5: Remove bolts securing radio bezel and AC controls.
Step 6: Unplug AC controls (from passenger side).
Step 7: Remove the radio bezel and AC controls.
Step 8: Remove screws securing radio to the vehicle, and take the original radio out of the dash.
Step 9: Check all the accessories for the new Seicane radio.
Step 10: Connect the harnesses to the back of the new Seicane radio.
Step 11: Connect the Seicane radio to your original car radio’s plugs, and put the new Seicane radio into the dash.
Step 12: Turn on the new Seicane radio and check whether the radio is working properly.
Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.
Wish the above installation guide can be helpful for you to some extent. If you have any problems you cannot deal with independently, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or if you are afraid of making damage to either your car radio or your car, you can straightly go to a car radio upgrade center and have the car radio installed by a professional technician.
While for selecting an ideal car radio, if you have no ideas, you can check out the following link to see if you like the amazing 2004 2005 2006 2007 2008-2014 Ford F150 F250 F350 car radio from Seicane. Here comes the link, please click:
This car radio is running on the latest and stable Android 7.1 operation system and a powerful quad-core CPU processor. And with this great car radio installed in your beloved car rad, you can get access to a wide range of practical and entertainment features, mainly including 3D GPS navigation system, FM/AM radio, DVD player, Bluetooth hands-free phone calls, Bluetooth streaming music, USB or SD card connection, file management, etc.
Under the guidance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you are able to locate where you are now and have the optimal route option to arrive at your desired destinations. Besides, this unit’s dual zone function enables you to listen to your favorite music under GPS mode. And the music will automatically switch to GPS voice.
And this car radio comes additional entertainment features to relax both yourself and your passengers in car.
Wish you like your wonderful trip accompanied by this unit. Good luck!