Can you recognize this image:dvd player aftermarket radio gps navigation bluetooth of 2010 Toyota Raze?
Some vehicle owners of Toyota Raze may have seen this stereo when you are shopping in the car market,you want to take one home but you have no idea how to install it in your car.Or in other words,you don’t know how to remove factory radio first.Doesn’t matter,here will show you 10 steps on how to upgrade 2010 Toyota Raze cd player with sound system.
It can be very easy to confirm information of cars like mode,size and years,but if is’s about the detailed steps to mount a car autoradio?Maybe very few people knows.
Before you upgrade your car’s head unit,you should ensure that the instructions for it are exactly right.General process can be like this:
first of all,choose one player that can be installed in your car.Next,trying to collect precise installation guide from the Internet,TV,magazine or other media routes.Chatting with workers who serves in this market and tell them what your doubt is about is one of ways that is normally used.So you may visit this website to get what you want by scanning and talking with them:http://www.seicane.com/8-inch-2010-toyota-raze-autoradio-gps-head-unit-3g-wifi-cd-dvd-player-dvr-bluetooth-music-tv-tuner-aux-steering-wheel-control-ipod-iphone-backup-camera-mp3-pop-c084.
If you would like to make your Toyota Raze cd player removal and dvd player installation more precise and safer, here are some suggestions about the installation and usage of the unit:
Precautions about the installation:
Please use touch screen pen to operate unit, do not use other objects include your fingers, if not it will cause damage to the screen;Don’t do self-service,maintenance or install the unit please when you have no experience or knowledge about it,in case of the power is on
2010 Toyota Raze cd player removal:
1.Before starting installation,remove the negative cable of battery
2.Release side panels with a panel removal tool from lower center console(beside shifter)
3.Remove the plastic piece which contains the shifter override with a small flat blade screwdriver
4.Insert special removal tool into override move in gear, then take out shift benzal piece
4.Make 2 screws out from sides of aux input panel unplug connectors
5.Take below small dashboard out
6.Release side panels from radio with a panel removal tool
7.Take air vent out and disconnect hazard switch
8.Remove 10mm hex head screws from factory stereo
9.Release the stereo,unplug connectors behind it and then remove it
2010 Toyota Raze dvd bluetooth installation:
10. connect all the cables correctly and install the dvd player in it
Connecting the wiring is a work that you should be more careful because it is more complex than other steps itself and there are much fine wires.If you are not very sure about it,I suggest you to do it according to corresponding instructions,check it again after you have finished it to avoid removal once again because you think it’s right and install new radio into it,but in fact it’s not.
After correct connection,you can install the radio and other part things to car and turn on it.If the unit can operate normally,then you have just finished installation yourself.
You can choose some websites to visit if you have interests in learning some other head units,may be next one can be a not bad choice:http://www.seicane.com.And I wrote another article which is about Toyota Verso gps,hope you can receive something that benefits you.