If you own a car, you must want everything of the car is of high performance. However, you may discover your factory radio is not up-to-date enough to be compatible with someone advanced features. Therefore, you can consider replacing your factory radio with a new aftermarket car radio. Besides, with some related installation experience and an installation guide, you can also try to install the new car radio on your own. The following is a 2008 2009 2010 2011 2012 KIA Cerato car radio installation instruction from Seicane, which can be taken as your reference.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2008 2009 2010 2011 2012 KIA Cerato car radio installation instruction
1. The original car radio.
2. Use a plastic removal tool to remove the panel and unplug the connectors at the back.
3. Unscrew screws that fixed the radio on the dashboard.
4. Gently pull out the original radio.
5. Disconnect the connectors and cables at the back.
6. Check all the accessories for the new Seicane car radio.
7. Connect the harnesses to the back of the new Seicane car radio.
8. Connect the Seicane car radio to your original radio’s plugs.
9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car radio into the dash.
11. Put everything into their original place. All the installation is done.
It is not abnormal if you come across any problems before or during the installation process. Under this circumstance, you can seek help from your dealer, someone experienced or a professional. Or for avoiding damage to either your car radio or your car, you can directly arrange a professional technician to help you install the new car radio.
If you are still looking for an ideal car radio for your beloved car, you might as well consider buying a great 2008 2009 2010 2011 2012 KIA Cerato car radio from Seicane. Here comes the link, please click:
With exquisite design and comprehensive features, this car radio specific for 2008 2009 2010 2011 2012 KIA Cerato is advanced enough to be a great replacement for your factory radio. It is loaded with the stable Android 6.0 operation system and a high-quality quad-core CPU processor.
With this car radio installed in your car, you can take advantage of a wide range of comprehensive features, mainly including 3D GPS navigation, FM/AM radio, Bluetooth hands-free calls, Bluetooth streaming music, AUX, file management, steering wheel control, etc. Here I would like to take GPS function as an instance.
The worldwide real-time 3D GPS navigation system is specially built in this car radio, which can help you easily locate where you are and accurately navigate to your desired destination.
Thanks to these features, almost all your various requirements can be met in car, therefore, you can gain a wonderful in-car life.
Don’t hesitate to add it to your cart right now. Good luck!