Keeping relaxed all the way and having a comfortable in-car environment is what almost all car owners want to pursue while driving cars on all trips. Now a remarkable car stereo can make your dream come true. Actually, it is not difficult to install a new car stereo. With some installation experience and a correct guide, you can easily achieve the installation. The following is a 2013 Honda Accord 9 2.4L Car Stereo installation guide. If you have the same dashboard, you can follow the detailed installation guide.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2013 Honda Accord 9 2.4L car stereo installation guide
1. Use a plastic removal tool to remove the side panels.
2. Remove two screws that fix the pocket.
3. Remove the pocket.
4. Use a plastic removal tool to release the panel to the left of the radio.
5. Use the plastic removal tool to pry the top tray and remove it.
6. There are two top screws and two bottom screws that are holding the radio, remove them with a screwdriver.
7. Pull out the original radio and disconnect connectors at the back of it.
8. Check all the accessories for the new Seicane car stereo.
9. Connect the harnesses to the back of the new Seicane car stereo.
10. Connect the Seicane car stereo to your original stereo’s plugs.
11. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
12. Put the new Seicane car stereo into the dash.
13. Put everything into their original place. All the installation is done.
Wish the above installation can help with your installation. If you meet with difficulties and don’t know how to overcome them, you can seek valuable advice from your dealer or ask a professional for help. But if you are still searching online for a suitable car stereo at a reasonable price and with a wide range of features, I’d like to recommend a 2013 Honda Accord 9 2.4L Car Stereo from Seicane to you. You may check out the link below.
Featured with the advanced Android 5.0.1 operation system as well as a R16 1.6 GHz Quad-core CPU processor, this 2013 Honda Accord 9 2.4L Car Stereo enables users to embrace a smoother and faster operation experience than ever before. Besides, this car stereo also provides users with the best viewing effect not only about the road condition but also on entertainment features. Moreover, this car stereo is also compatible with many new features, like 3D GPS, Bluetooth module, DVD player, etc. These features are all supported to offer users the best services. If you like it, don’t hesitate to add it to your cart.