Do you yearn for upgrading your factory radio with a new multi-functional car stereo on your own? If you want to have a try, you need to remove your original radio and install a new one under a correct installation guide. Here comes an installation guide for a 2008-2012 Hyundai I20 bluetooth dvd gps stereo. If you have a same or similar dashboard, or you are interest in it, please keep reading it carefully.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2008-2012 Hyundai I20 bluetooth gps stereo installation guide
1.Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2.Remove screws that fixed the radio on the dashboard.
3.Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4.Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6.Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7.If everything is OK, firm screws into their original place.
8.Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
Wish the above installation guide can be helpful for you. If there is any question, you can seek help from your dealer or a professional. Besides, it is very vital for you to choose a car stereo that is compatible with your car. If you have got a suitable car stereo for your 2008-2012 Hyundai I20, I would like to share a 2008-2012 Hyundai I20 bluetooth dvd gps stereo from Seicane with you. For more details, please click:
This 2008-2012 Hyundai I20 bluetooth dvd gps stereo can be your best road companion as it comes with both practical functions and entertainment features. The high-end 3D GPS navigation system is specially built in for you to find the best route to your ideal destinations through turn-by-turn directions and voice prompts. Besides, the Bluetooth technology makes you possible to get access to hands-free calls and streaming music from mobile phone through the wireless connection between this stereo and your phone. One thing should draw your attention, that is, the steering wheel still remains its original functions after installation. Don’t hesitate to take it now if you like it!
Leave a Reply