Can you believe that a new car stereo can not only guide you to your destinations with its accurate direction but also bring you a lot of fun at the same time? Moreover, since most car stereos are plug-and-play, the installation process is not complicated. So you can easily replace your factory radio under the guidance of a detailed installation instruction. The following 2002-2007 Jeep Wrangler Liberty gps bluetooth radio installation steps from Seicane can be referred if you plan to replace a 2002-2007 Jeep Wrangler Liberty factory radio.
Please notice before the installation:
1.Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
2.A lever and a screwdriver need to be prepared before the installation.
3.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2002-2007 Jeep Wrangler Liberty car stereo installation steps
1. Remove the trim piece above cup holder with a lever.
2. Remove 2 screws behind the trim piece.
3. Gently pry around the side of trim panel with the lever and then remove the trim panel.
4. Remove 4 screws which hold the factory radio in place.
5. Take out the original radio.
6. Disconnect the smaller harness on the behind of the original car radio.
7. Check all the accessories for the new Seicane car radio.
8. Connect the harnesses to the back of the new Seicane car radio.
9. Connect the Seicane car radio to your original car radio’s plugs.
10. Install four screws and trim panel.
11. Install 2 screws behind the trim piece and the trim piece.
12. Turn on the new radio and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Above are the basic steps for a 2002-2007 Jeep Wrangler Liberty car stereo removal and installation. If you encounter any problems you cannot deal with by yourself, you’d better contact your dealer or someone experienced. Or if you think it too hard to finish the whole installation process on your own, you might arrange a professional technician to install the stereo.
To help you have a right replacement for your car, I’d like to share a remarkable 2002-2007 Jeep Wrangler Liberty gps bluetooth radio from Seicane with your as a reference.
This remarkable stereo is loaded with the most advanced WinCE6.0 operation system which greatly ensures you a stable running environment. A variety of practical and amusement features make it be a multifunctional stereo to meet almost all your different needs in car.
Even you don’t have a good sense of directions in daily life, you can depend on the built-in GPS module to get access to voice cues, distance information, POIs, and road planning so that you can arrive in your desired destinations accurately.
Additionally, you can make full use of the amusement features as a DVD player to play region-free music or movies to relax both yourself and your passengers.
Wish you have a nice trip because of this intelligent car stereo. Good luck to you!