Before we know the specific upgrade steps,I’d like to show you an image:head unit after installation,radio GPS dvd bluetooth with sat nav system of 2013 Toyota RAV4.
This new unit is one special stereo that suits 2013 Toyota RAV4,you can have a look at its trim panel and compare it with your original one’s.They are same,this is why it fits your car.
Nowadays more and more things are upgrading at very rapid speed with faster and faster development of technology.This is where the market just is,that human begins need more advanced products,they need so they seek for this kind of life style.
So how to remove 2013 Toyota RAV4 original radio stereo and install GPS bluetooth dvd?About this question,I will show you detailed installation steps for it in the following part.
Most of you are thinking about the upgrading things but don’t know what to do with the car radio.Don’t worry,you’ll see specific installation steps for Toyota RAV4 radio in latter part.But please note to remove the negative power cable from the battery before you begin your installation as the next picture shows.
2013 Toyota RAV4 original radio removal and aftermarket radio installation:
1.Make out the upper dashboard trim panel with an automotive tool,set the panel aside once removed
2.Pry the air conditioning vents on the left and right-hand sides of the factory touch careen unit gently away from the dashboard
3.Gently lever the clock display and hazard lamp panel away from the dashboard and set it to the side
4.Get out the four retaining screws attaching the factory touch screen unit to the dashboard
5.Gently remove the touch screen unit away from the dashboard and lean it forward to gain access to the wiring harnesses on the reverse side
6.Make the touch screen disconnected by unplugging the individual harnesses
7.Absolutely removed dashboard
Original Toyota RAV4 radio removal has finished until here,in fact removal is the main part of upgrading car radio.
If you have a clear idea about removal affairs,the next installation process will not be a hard thing to you.
And it can be divided into three parts:make connections with all cables,install new machine and install other parts back to their primary places.
When you feel a little difficult to do the connection or other things,you can scan some helpful websites which will give you correct guide,for example: http://www.seicane.com/all-in-one-touch-screen-radio-stereo-for-2013-toyota-rav4-with-3g-wifi-dvd-player-bluetooth-music-tv-tuner-ipod-aux-steering-wheel-control-c247 ,or you can ask someone who knows better about this aspect.
We should know that making sure your security is actually the most important no matter how entertaining that reaching this upgrade goal is.So please having a better understanding about the upgrade as much as possible and making adequate preparations as you can before any work.
Precautions after installation:
1.Please try to make the radio away from heat sources,such as heating,heat or have other things,or it may cause damage to the machine
2.Please do not expose this machine to rain or moisture in the environment(as when rain or car washing) to avoid the internal machinery of the short circuit,which may cause some danger
3.You have to shut down power cables and then wipe panel before you clean the head unit.No using volatile chemicals to clean trim panel