Car stereo after replacement,radio dvd aftermarket sat nav with auto A/V of 2006-2011 Mitsubishi outlander
Actually most of car DVD players are largely identical but with differences.Therefore,if your stereo dashboard looks alike this one,it means that it’s also suitable for your car.Before we begin this article,if you are the owner of 2006-2011 Mitsubishi outlander but you hold your car’s stereo autoradio is obsoleted and you want to replace a more advanced one,then it’s a right choice for you to read this essay.For that you will see detailed operation steps on how to remove 2006-2011 Mitsubishi outlander CD radio audio system here,which may let you not need to ask someone who are professional for help but do it by yourself.
Before you begin any work,you may need to know more about the new unit,such as how to operate new functions,what details we need to watch out,ok,here’s a proper website for you:http://www.seicane.com/digital-touch-screen-car-dvd-player-gps-navigation-specialized-for-2006-2011-mitsubishi-outlander-with-radio-bluetooth-usb-sd-3g-wifi-c056 .
Next we will see specific steps for how to remove Mitsubishi outlander CD radio and install a new player for 2006-2011 Mitsubishi outlander.
1.Open up the glove compartment
2.Remove side panel screw
3.Pulling toward seat to remove side panel
4.Remove the other screw of trim panel
5.Pull trim piece toward seat softly
6.After trim piece is loose,remove trim with panel removal tool or hands
7.Remove trim piece by multiple clips
8.Attention:these three screws needn’t to remove
9.Gently pry around edges of stereo face with panel removal tool
10.Unclip stereo face along edges of stereo,place it in safe location after it is removed
11.Disconnect the connector,at this time do not turn on car series
12.Take out four screws which hold stereo
13.Take out original CD player for access to harnesses behind it
14.Unplug smaller connector for access to Grom Y-harness
15.Connect Grom harness to open port
16.Make removed harness inserted into Grom Y-harness
17.Let 20-pin harness connectted to Grom unit
18.Make connection with the help of provided P-Tap and make sure the P-Tap is tightly secured
19.Fasten top cap,then insert Yellow power wire in it
20.Make stripped wire inserted as far as possible
21.Secure cap and tug on wire tightly to ensure it is secured
22.After finishing connections,turn on new radio and check your new unit,I hope that you can enjoy your new audio system,this is the whole installation process.
At last,there are some attentions about radio usage and maintance for you:
1.After you have installed a new unit successfully,please do not be so excited that you stare at it or pay most attention on it when you are driving with it,it’s very dangerous
2.If you meet raining days with high humidity when you are driving,the moisture may gather on your head unit,you should pay attention to it for it will probably lead to DVD player’s unproper work
3.Please try to make touch screen as clean as possible,do not sprinkle any liquid on the stereo if you hope it can be used longer and better