If you are a careful man,you may find a fact that more and more people have upgraded radio system of the car.It means that many people are seeking for more entertainments in daily life,for example cars.But why and how to mount 2006-2010 OPEL Zafira bluetooth radio with aftermarket navigation system?
It doesn’t matter if you are a owner of other cars,because many modern stereo can probably be mounted in several cars.With rapid development of technology, electronic products is upgrading with a surprising speed.Just like car stereo,its surface appearance and functions have been designed more advanced and beneficial.
There is an image for this head unit after installation,bluetooth dvd with aftermarket sat nav and 3G wifi of 2006-2010 OPEL Zafira.
If you find that your radio panel is the same with this one,it shows that this unit is suitable for your car and can be mounted in without difficulty.Ok,you may can not wait to learn mount process,here are you wants and you may find removing part is really very simple
It’s normal to find little difference in the following process,you can take it as a reference on autoradio installation.
2006-2010 OPEL Zafira factory stereo removal：
1.If you watch very closely,you will find four small holes on the unit,insert two removal tools into the holes
2.Bend two tools a little and pull out the stereo at the same time
3.Unplug cables between them
4.Remove a screw and put wires in inner place
5.Use a pry tool,lever top of the trim panel,release and remove it
6.When you take the panel out,you will find a lot of cables are also taken out.Then you connect antennas like this:
7.Use a screwdriver pull out the side panel a little,then remove lower side panel in front of file
8.Insert long red line down through the side fasten panel and up through removed panel in front of file,firm the side panel
2006-2010 OPEL Zafira factory stereo installation：
9.Make wiring as the picture show,tidy all of them into the space
10.Connect long red cable to right place
11.Connect it with removed small panel in front of file and cover it
12.Adapters connection between new unit and the car
13.Then connect the two outside cables to back of new unit,install new radio into it,and cover removed panel on the dvd player
Thus all operations for original stereo removal and OPEL Zafira bluetooth installation is all here.We can see that removing is very simple,but when we want to mount it,it become complex.Therefore,you should read this part slowly and carefully or search some helpful instructions from the Internet.
Of course,you can ask someone who are professional to help you,that may be quicker but you can also do it by yourself with right installation guide.
Precautions after installation:
1.Please don’t be too excited after you succeed fulfilling the job or you may cause some damage to car or even yourself.
2.To make sure the head unit can be used longer,do not use any chemicals to wash it or sprinkle any liquid on it
3.Please don’t pay much attention to the dvd especially when you are driving on a rapid road
For more information about aftermarket navigation of OPEL Zafira,visiting this website may be helpful:http://www.seicane.com/aftermarket-oem-gps-in-dash-car-dvd-for-opel-zafira-with-touch-screen-radio-bluetooth-3-zone-advanced-pop-built-in-20-disk-virtual-cd-changer-3g-wifi-c019.