This is a stereo which fits Renault Duster,it can be installed in your car if you are one owner of Renault Duster.
People are more likely to seek for convenient and entertaining things from busy life,I think this is one
of the reasons why upgrading car audios is becoming so popular,and many car owners are finding
out ways to upgrade their car stereos in order to do it himself.
About Renault Duster radio upgrade,the first thing you should do is to choose one head unit which is
suitable for your car.And it has be shown at the beginning of this essay.
Next,we should figure out how to install aftermarket Renault Duster navigation system with BT
touch screen,this is the main content I will tell you in the following part.
And here are some tips about installation before showing it.
1.Before installation,check the battery voltage for this unit is used for the vehicle with 12V battery and
2.Before connecting,make sure the ignition is off to avoid short circuit
3.Please make sure that all loose wires are isolated with electrical parts
4.Please don’t tangle the wire when tighten the moving parts(such as seat rails)
Renault Duster original stereo removal:
1.Use your hand to gently pry trim panel and remove it,it’s easy to remove so don’t need a lever
2.Put the trim panel in front of its original space to make next steps more easily
3.Use a screwdriver to remove these four screws
4.Take the stereo out and remove it
5.Disconnect antennas behind the stereo
Be careful not let the trim panel slide down,which may disturb you.
7. If it’s needed,you may need to make screws under the panel out
Renault Duster navigation system installation:
Now factory stereo has been removed and next we will continue installing Renault Duster navigation
system into the car.
8.Remove original panel,connect cables of new unit to those wires connected car.Please make sure that
all your connection is right and you can take installation instructions within your new radio as reference
9.Sort wires well and put new unit into it,don’t eager to reinstall other things,you can turn on audio first.
If new unit can work out,then continue to make other removed things back to right places.Then all
operations for the installation has been introduced,you can get more details from next website: