How to install a Suzuki Jimny car radio with GPS Radio TV Bluetooth DVD player with easy 9 steps

1,857 views

Some car owners who want to keep both themselves and their passengers entertained all the way now can easily replace the factory radio with a multifunctional head unit to add a huge ton of fun in the car. Whether you find an ideal head unit for your car or not, you can take this professional Suzuki Jimny car radio installation instruction from Seicane as a reference. Wish it can be helpful for you.

Suzuki Jimny car radio after installation

Suzuki Jimny car radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

Suzuki Jimny car radio installation instruction

1.The original car radio.

The original car radio

The original car radio

2.Remove all clips from the dashboard. The best way to do that is pulling them to the rear of the panel. To reassemble the dash cover the clips must be placed in the cover, not in the dashboard holes.

Remove all clips from the dashboard

Remove all clips from the dashboard

3.Unscrew the radio and disconnect ALL cables.

Unscrew the radio and disconnect ALL cables

Unscrew the radio and disconnect ALL cables

4.Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

5.Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

6.Connect the Seicane car radio to your original car radio ‘s plugs.

7.Put the new Seicane radio into the dash.

8.Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9.Put everything into their original place.

All the detailed installation guide for the Suzuki Jimny car radio is shown the above. Wish it can be helpful for you. If you encounter any question, you can consult your dealer. Please make sure you are clear about every step before you start to install your new radio.

Besides, if you haven’t found an ideal car radio for your car, I’d like to recommend a wonderful Suzuki Jimny car radio from Seicane to you. It comes with an exquisite interface and high configurations for you to upgrade your factory radio. For more details, please click:

http://www.seicane.com/car-dvd-player-for-suzuki-jimny-with-gps-radio-tv-bluetooth-srd-8715

This modern Suzuki Jimny car radio can function as an amazing DVD multimedia player for you to play your favorite videos in your car. By simply connecting with your enabled mobile phone, you can have hands-free calls and stream audio to keep safe and relaxed on the journey. Just navigate to a wide range of locations with this fantastic Suzuki Jimny car radio for great fun on the way!

Related Posts

Posted in Uncategorized.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>