Some professional knowledge is definitely required in installing a car stereo. However, if you have some related installation experience and a correct installation guide, you can also achieve the installation on your own easily. If you own a 2014 Toyota Tundra , the following 2014 Toyota Tundra car radio installation guide from Seicane can be helpful for you. The picture below is take after the installation for your reference.
2014 Toyota Tundra car radio after installation
Some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2014 Toyota Tundra car radio installation guide
1.The original car radio.
The original car radio
2.Pry the panel beneath the air conditioner controller with a lever, then remove it.
2-1. Pry the panel beneath the air conditioner controller with a lever.
2-2. Remove the panel.
3.Remove the air conditioner controller with your hands.
Remove the air conditioner controller with your hands
4.Unscrew the screws circled in red as follows which hold the original car radio in place with a screwdriver.
Unscrew the screws circled in red as follows which hold the original car radio in place with a screwdriver
5.Gently take the original car radio out of the dashboard.
Gently take the original car radio out of the dashboard
6.Disconnect the connectors at the back of the original car radio.
7.Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
8.Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
9.Connect the Seicane car radio to your original car radio ‘s plugs.
10.Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11.Put the new Seicane car radio into the dash.
12.Put everything into their original place.
That’s all the installation guide for a 2014 Toyota Tundra car radio. Can you understand all the steps? If not, you can consult your dealer. Please make sure you are clear about every step before you start your installation. If you don’t have an ideal radio for your car, I’d like to recommend a great 2014 Toyota Tundra car radio from Seicane to you. Here’s the link, please click:
With convenient, practical and humanizing operation interface, this amazing 2014 Toyota Tundra car radio has voice prompts for accurate guidance and re-planning of the route automatically, leading you smoothly all the way. It can also provides great quality music streaming, hands-free calls via Bluetooth technology and iPod function is supported, too. Just take it on your way to have fun. Good luck to you!
Leave a Reply