To gain an excellent in-car life, some car owners may buy a new car for performance. But I think it is actually not an adoptable way for most car owners who don’t want to spend a lot of money on upgrading their car. Frankly speaking, you can easily replace your factory radio with a brand new car radio with comprehensive features. Here I’d like to share a detailed 2005-2007 Ford Galaxy car radio installation guide from Seicane with you. If you also own a 2005-2007 Ford Galaxy, you may read it and take it as a reference.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2005-2007 Ford Galaxy car radio installation instruction
Step 1: Remove the trim around gear shifter.
Step 2: Remove screws securing center console lid with a screwdriver.
Step 3: Remove the center console trim.
Step 4: Remove console side panels on both driver and passenger sides.
Step 5: Remove bolts securing radio bezel and AC controls.
Step 6: Unplug AC controls (from passenger side).
Step 7: Remove the radio bezel and AC controls.
Step 8: Remove screws securing radio to the vehicle.
Step 9: Take the original radio out of the dash, and disconnect the connectors at the back of the radio.
Step 10: Check all the accessories for the new Seicane car stereo.
Step 11: Connect the harnesses to the back of the new Seicane car stereo.
Step 12: Connect the Seicane car stereo to your original car stereo’s plugs.
Step 13: Put the new Seicane car stereo into the dash.
Step 14: Turn on the new Seicane car stereo and check whether the stereo is working properly.
Step 15: Install all screws, trims, panels, bolts and the stereo bezel and AC controls into their original place.
Wish you can finish the whole installation process successfully. Before installation, please make clear every detailed step. If you have any questions, you can seek help from your dealer or a professional. Besides, firstly please check the compatibility between your new car radio and your car. If you have no ideas, you can refer to the following link which is a 2005-2007 Ford Galaxy car radio from Seicane. For more details, please click:
Based on the stable Android operation system and powerful Quad-core processor with great performance, this intelligent car radio can be one of the best choices for you to replace your factory radio.
This unit comes with a wide range of upgraded and new features such as 3D GPS navigation system, Bluetooth hands-free calls, Bluetooth music, CD/DVD player, FM/ AM radio, USB port, SD card connection, WiFi, etc. Therefore, you can make full use of these features to enrich your in-car life.
Apart from the above basic features I mentioned, there are some optional features being supported to be added to this unit, including car DVR, backup camera, OBD2, DAB, etc. With the optional backup camera, you can make your reversing and parking easier.
Wish you have a wonderful in-car life accompanied by this multifunctional car radio. Good luck to you!