To upgrade your factory radio with a modern multifunctional head unit for the greatest convenience and the maximum entertainment in your vehicle is really amazing. It is a simple but also sophisticated task. To install a new Chrysler 300C aftermarket radio is quite simple, it’s just plug and play and the installation is quite easy. However, what makes it difficult is to find a correct aftermarket which can fit your vehicle without no problem.
Even though the installation isn’t too hard for a car owner to finish, there are still some things you need to pay attention to. First of all, if you don’t have any experience on how to install a new aftermarket, you’d better go to a car stereo shop to install it. Secondly, if you want to do it by yourself, it’s suggested that you should ask for the detailed instruction about the installation from the dealer and then install it under the guidance of a professional technician. To be exact, the following is the installation guide for a 2005 2006 2007 Chrysler 300C aftermarket radio.
Precautions before the installation:
- For your safety, please remove the negative cable on the vehicle battery.
- Please prepare a lever and a screwdriver for the installation.
The below is the detailed instructions on how to install a 2005 2006 2007 Chrysler 300C aftermarket radio:
Step 1: Remove the trim panel with the lever.
Please pry the trim panel from the bottom to the top, and then left to right with a lever for several times until the trim panel is loosened. Then, use your hands to loosen the trim panel. After that, please carefully take the trim panel off the dashboard. Please notice that the wires at the back of the trim panel needs to be removed before taking the trim panel down.
Step 2: Remove the factory radio.
Please remove the screws holding on the radio with a screwdriver. Take the factory radio out of the dash carefully and then disconnect the wires at the back of it. At last, place the radio aside carefully.
Step 3: Connect the wires to the new radio and install it.
Please connect the new unit to the original wiring harness correctly as the user manual shows. Then put the new radio into the dash, then turn on it and have a comprehensive check. Please pay attention to GPS, TV, radio functions which have special requirements on antennas and wirings.
Step 4: Install the trim panel.
If everything works well on the new radio, please install the screws into their original place. Then please install the trim panel.
The above is the step-by-step installation on how to install a new 2005 2006 2007 Chrysler 300C aftermarket radio. To make sure you have the right head unit installed, please check the following link which is an intelligent head unit for 2005 2006 2007 Chrysler 300C:
This WINCE 6.0 CORE radio DVD player GPS navigation system can perfectly fit 2005 2006 2007 Chrysler 300C. With the built-in GPS navigation system, you won’t get lost no matter you are travelling around the whole country or finding a closest gas station. To have hands-free calls for safety, you just need to simply sync your mobile phone with this unit, besides, you can also stream music from the playlist in your mobile phone. With wifi connection built in, you can freely surf the internet and download the apps on the android market to meet all your needs when you are in the range of the wifi hotspot. You can turn your vehicle into an entertainment warehouse with its remarkable multimedia functions which include DVD, VCD, CD, Ipod, bluetooth music, TV programs. Furthermore, the USB/SD/Ipod connection will definitely offer much fun and pleasure to you and your passengers on all trips. Just take this 2005 2006 2007 Chrysler 300C aftermarket radio to have a different driving experience!