To gain the great convenience and enjoyment in your car, you can try to remove your factory radio and install a new car radio which can be compatible with a wide range of practical and entertainment features. It is not so difficult to install a new car radio that your can find a detailed installation guide for help and try to install the new car radio by yourself. The following is a 2 Din Universal NISSAN TOYOTA KIA car radio from Seicane, which can be taken as a reference for you.
Tips about the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2 Din Universal NISSAN TOYOTA KIA car radio installation guide
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
2. Remove screws that fixed the radio on the dashboard.
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
4. Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Now do you know how to install your new car radio by yourself in your car with the help of the above installation guide? If you can’t, please don’t worry. You can contact your dealer, communicate with someone experienced or turn to a professional for help. As for the selection of an ideal car radio, if you have no ideas, you can refer to the following link which is a remarkable 2 Din Universal NISSAN TOYOTA KIA car radio from Seicane. For more details, please click:
This car radio will be a great choice for you to replace your factory radio. It runs on the most advanced Android 8.0 operations system, 8-core CPU processor and 32GB INland flash as well as 4GB RAM.
With the assistance of the worldwide real-time GPS navigation system, you are able to locate where you are currently and find the right way to arrive at your desired destinations. And this unit comes with dual zone function, which enables you to listen to your favorite music while navigating.
Besides, as long as you connect your Bluetooth-enabled mobile phone to this car radio, you can freely get access to both Bluetooth hands-free phone calls as well as Bluetooth streaming music without taking your hands off the steering wheel, which will bring you both convenience and enjoyment.
Wish you like this unit and good luck to you!