http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

How to install 2010-2014 Chevrolet Orlando navigation system support E-Book Bluetooth DVD

2,534 views

New unit after upgrade,navigation dvd with touch screen bluetooth function of 2010-2014 Chevrolet Orlando.

New unit after upgrade,navigation dvd with touch screen bluetooth function of 2010-2014 Chevrolet Orlando

New unit after upgrade,navigation dvd with touch screen bluetooth function of 2010-2014 Chevrolet Orlando

Before we talk about the topic on how to install 2010-2014 Chevrolet Orlando navigation system support E-Book Bluetooth DVD,we can view this front picture first to grasp a general idea about the appearance and some new functions of   new autoradio.

If we watch carefully,we can find that this car dvd dashboard has some difference with other ones:this stereo has two operations:one is touch screen which can be operated with a touch screen pen,the other one is push button controls,both ways can operated this unit.Though you are not owner of 2010-2014 Chevrolet Orlando,    there is no matter only if your radio dashboard is alike with above one.

So the next question comes to what steps will we follow about installing Chevrolet Orlando navigation gps radio,and it isn’t a work that need specialized technology but can be a normal work by ourselves,but under the condition that we have known clearly about its installation instructions.Next comes to main content of this essay.

2010-2014 Chevrolet Orlando factory radio removal:

1.Pry the upper vent housing panel from the dashuse gently with a panel removal tool

Pry the upper vent housing panel from the dashuse gently with a panel removal tool

Pry the upper vent housing panel from the dashuse gently with a panel removal tool

2.Prize the shifter surround trim panel,on manual transmission cars,release and replace the shifter

Prize the shifter surround trim panel,on manual transmission cars,release and replace the shifter

Prize the shifter surround trim panel,on manual transmission cars,release and replace the shifter

3.Take 2 screws out of storage pocket,then take storage out

Take 2 screws out of storage pocket

Take 2 screws out of storage pocket

take storage out

take storage out

4.Get 4 screws out of accessorv control panel

remove this screw and the other corresponding one

Get 4 screws out of accessorv control panel

Get 4 screws out of accessorv control panel

5.Pull off this panel,this panel was very tough to remove,be patient and the clips will get fasten and let panel hang to side

Pull off this panel

Pull off this panel

6.Take 2 screws out of the radio control panel,unplug control panel of radio

Take 2 screws out of the radio control panel

Take 2 screws out of the radio control panel

7.This is a really strange blue clip you must remove the blue clip completely before removing the real connector,and get out the other clip

before removing the real connector,remove the blue clip completely

before removing the real connector,remove the blue clip completely

8.Make 2 screws out of the radio chassis,and 2 screws near the top of the radio  to fasten the screen

Make 2 screws out of the radio chassis

Make 2 screws out of the radio chassis

9.Pulling screen out to remove it,disconnect behind clip

Pulling screen out to remove it

Pulling screen out to remove it

10.Take 2 more screws on stereo out

Take 2 more screws on stereo out

Take 2 more screws on stereo out

11.Make stereo and connectors out

Make stereo and connectors out

Make stereo and connectors out

Before we install new head unit,we can have a look at next video first:

2010-2014 Chevrolet Orlando aftermarket navigation system installation:

Original audio is removed,the next job is to install GPS radio navigation system,and you need to be more careful in next process.

Next what you need to do is to make cables connection between new unit and car.About this,I advise you to read instructions carefully which is within your bought radio and you can find answers from it.This is a key part of it,so you should be very careful when you are connecting cables and antennas.

After you have conneced all antennas,tidy them in order to save more spaced for new stereo for the space for them is very limited.After that,install your new radio gps into the car.

Turn on new radio and check whether it can work well.If it’s ok,it means that your work is right.Then you can firm those removed screws to their original places and reinstall storage,shifter,upper vents and housing panel back to right positions.Thus the whole procedure is finished and you will enjoy a good time during your driving.

If you still have some doubts on this dvd radio with nav system,they may be sloved by visiting the following website:http://www.seicane.com/in-dash-navigation-multimedia-player-for-2010-2014-chevrolet-orlando-with-pop-gps-3g-wifi-support-e-book-bluetooth-dvd-radio-20-disk-virtual-cd-changer-c155.

Attention:

Please keep well everything which are removed especially the screws for they are small but useful,they will be used again in your installation to fix the machine.If you can’t find a necessary thing,

that would be very distraught.

 

Related Posts

Posted in Chrysler. Tagged with , , .

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>