http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

How to install 2006-2010 OPEL Zafira bluetooth dvd with 3G WiFi CD changer 

534 views

Head unit after installation,bluetooth dvd player with gps nav system of 2006-2010 OPEL Zafira

Head unit after installation,bluetooth dvd player with gps nav system of 2006-2010 OPEL Zafira

This is the head unit after installation,bluetooth dvd player with gps nav system of 2006-2010 OPEL Zafira.

Facts shows that there are more and more people are upgrading their audio system of their cars.

Because more advanced and convenient stereos attract us with its nicer appearance and economic

functions equipped.And this above image is one of them which suits 2006-2010 OPEL Zafira.

 

You may be very busy and want to make your OPEL Zafira bluetooth dvd installation more professional,

you can go to corresponding shop and ask a technical worker to achieve it.

 

Or some of you may want to do it yourself if it’s possible.The answer is yes,you can install it yourself when

you have known clearly about how to install 2006-2010 OPEL Zafira bluetooth dvd with 3G WiFi CD

changer.Here is a video which shows you how to operate this new unit:

 

At the same time,though you are the owner of other cars,that will matter a lot,because many modern

stereos probably can be installed in several cars.Maybe this unit in the picture also fits your car.If it doesn’t,

you can also read this essay carefully for you can take it as reference.Because the principles of radio upgrade

are mostly same.Next comes to easy steps of audio replacement.

 

2006-2010 OPEL Zafira original radio removal and bluetooth dvd installation:

 

1.There are four small holes on the unit,insert two removal tools into the holes

insert two removal tools into the 4 holes

insert two removal tools into the 4 holes

2.Bend the tools a little and pull out the stereo at the same time

Bend the tools a little and pull out the stereo at the same time

Bend the tools a little and pull out the stereo at the same time

3.Disconnect cables behind the unit

Disconnect cables behind the unit

Disconnect cables behind the unit

4.Take out a screw and put wires in inner place

Take out a screw and put wires in inner place

Take out a screw and put wires in inner place

5.Use a pry tool to lever top of the trim panel,release and remove it

Use a pry tool to lever top of the trim panel

Use a pry tool to lever top of the trim panel

6.When you take out the panel,you will find a lot of cables are also taken out.Then you connect antennas

as the pictures show:

 

 

connect antennas 1

connect antennas 1

connect antennas 2

connect antennas 2

7.Pull out the side panel a little with a screwdriver,then make lower side panel off which is in front of file

Pull out the side panel a little with a screwdriver

Pull out the side panel a little with a screwdriver

 

make lower side panel off which is in front of file

make lower side panel off which is in front of file

8.Insert long red wire down through the side fasten panel,then up through removed panel in front of file,firm the side panel

Insert long red wire down through the side fasten panel,then up through removed panel in front of file,firm the side panel

Insert long red wire down through the side fasten panel,then up through removed panel in front of file,firm the side panel

9.Make wires connected as the picture show,tidy all of them into the space

Make wires connected

Make wires connected

10.Plug long red cable to right place

Plug long red cable to right place

Plug long red cable to right place

11.Make it connected to removed small panel in front of file and cover it

Make it connected to removed small panel in front of file and cover it

Make it connected to removed small panel in front of file and cover it

12.Connect adapters,cables between new unit and the car

Connect adapters,cables between new unit and the car

Connect adapters,cables between new unit and the car

 

Connect adapters,cables between new unit and the car2

Connect adapters,cables between new unit and the car2

 

13.Then connect that two outside wires to back of new unit,install new radio into it,and cover removed panel on the dvd player

So the whole procedure for car stereo installation is over and we can see that removal work is very simple

when we have right removal tools.However when we want to mount it,it become  a little complex when we

are making cables connection.You can learn it well by viewing some messages from the Internet,for example:

http://www.seicane.com/aftermarket-oem-gps-in-dash-car-dvd-for-opel-zafira-with-touch-screen-radio-

bluetooth-3-zone-advanced-pop-built-in-20-disk-virtual-cd-changer-3g-wifi-c019.

If you are not very sure,you can ask someone who are professional to help you,that may be quicker.

Some notes after installation:

1.Please don’t feel too excited after you succeed finishing the job,or it may cause some damage to car or even

yourself

2.Please don’t pay too much attention to new gps dvd especially when you are driving on a complex road

3.In order to ensure the head unit can be used longer,do not use any chemicals to wipe it or spill any liquid

on it

 

For more choices about radios for all kinds of cars,maybe you can find what you want from next website:

http://www.seicane.com/.And if you are interested in Opel Astra DVD GPS installation,I have also written

an article for it.

Related Posts

Posted in Opel car DVD. Tagged with , , .

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>