How to easily remove and install a 2007 2008 2009 2010 Jeep Wrangler Unlimited bluetooth dvd gps radio with Bluetooth Android5.1.1

184 views

As it is known, a new car stereo which is compatible with a lot of features can bring much convenience, comfort as well as enjoyment to you during your in-car time. If you’re going to upgrade your factory radio, you can find a step-by-step installation guide to help you. This article mainly tells about how to remove and install a 2007-2010 Jeep Wrangler Unlimited bluetooth dvd gps radio, which may be helpful for you during your installation.

2007-2010 Jeep Wrangler Unlimited bluetooth dvd gps radio after installation

2007-2010 Jeep Wrangler Unlimited bluetooth dvd gps radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2007-2010 Jeep Wrangler Unlimited car radio installation steps

1. The original car radio.

The original car radio

The original car radio

2. Grab at the bottoming plastic cover, push the bottoming box and release it.

Grab at the bottoming plastic cover, push the bottoming box and release it

Grab at the bottoming plastic cover, push the bottoming box and release it

3. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

3-1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

3-1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

3-2

3-2

4. Unplug the connectors at the back of panel.

Unplug the connectors at the back of panel

Unplug the connectors at the back of panel

5.Remove four screws that fixed the radio on the dashboard.

Remove four screws that fixed the radio on the dashboard

Remove four screws that fixed the radio on the dashboard

6.Gently pull the factory radio out of the dash. Then unplug the connectors at the back of the factory radio.

Gently pull the factory radio out of the dash. Then unplug the connectors at the back of the factory radio

Gently pull the factory radio out of the dash. Then unplug the connectors at the back of the factory radio

7. Check all the accessories for the new Seicane head unit.

8. Connect the harnesses to the back of the new Seicane head unit.

9. Connect the Seicane head unit to your original head unit ‘s plugs.

10. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane head unit into the dash.

12. Put everything into their original place. All the installation is done.

 

Can you understand the above 12 steps for the related installation? Wish they can help with your whole installation. Anyway, please make sure you are clear with every step of the installation process. If you have any questions, you are welcome to seek help from your dealer or a professional. If you are looking for a suitable car stereo for your car, you ca refer to this intelligent 2007-2010 Jeep Wrangler Unlimited bluetooth dvd gps radio with gps nav system from Seicane, please click:

http://www.seicane.com/oem-android-touch-screen-for-2007-2008-2009-2010-jeep-wrangler-unlimited-with-aftermarket-car-stereo-autoradio-gps-navigation-system-dvd-player-bluetooth-music-mirror-link-obd2-dvr-rearview-camera-tv-usb-sd-3g-wifi-ipod-1080p-video-s166235

This all-in-one 2007-2010 Jeep Wrangler Unlimited bluetooth dvd gps radio is equipped with GPS navigation system in high precision which offers you text-to-speech guidance to make you find the best way to your desired destinations. By simply pairing with your Bluetooth-enabled mobile phone, without keeping hands off the steering wheel, hands-free calls and music streaming are both supported to keep you safe and pleased all the way. Just enjoy your trip with this great 2007-2010 Jeep Wrangler Unlimited bluetooth dvd gps radio in your car. Thanks for reading and have a good time.

Related Posts

Posted in Uncategorized. Tagged with .

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>