If you think your factory radio comes with few features, which can’t meet all your needs in your car. It’s a great ideal for you to upgrade it with a multifunctional head unit which features GPS navigation, FM/AM radio, DVD player, Bluetooth hands-free calls, streaming music, etc. To install a new unit in your car, you can find a professional detailed professional guide to help you. This detailed 2012-2013 Skoda RAPID head unit installation instruction from Seicane is for your reference.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2012-2013 Skoda RAPID head unit installation guide
1.Remove the top panel with a lever.
2.Disconnect the connector at the back of the panel.
3.Unscrew the screw with a screwdriver.
4.Remove the metal sheet on the top with your hands.
5.Unscrew two screws circled in red shown as follows under the metal sheet.
6.Remove the air conditioner vent with your hands.
7.Unscrew two screws under the vent with a screwdriver.
8.Remove the panel on the original car radio.
9.Unscrew four screws holding the original car radio with a screwdriver.
10.Take the original car radio out of the dash.
11.Disconnect all the connectors at the back of the original car radio.
12.Check all the accessories for the new Seicane head unit.
13.Connect the harnesses to the back of the new Seicane head unit.
14.Connect the Seicane head unit to your original car radio ‘s plugs.
15.Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
16.Put the new Seicane head unit into the dash.
17.Put everything into their original place.
The step-by-step 2012-2013 Skoda RAPID head unit installation guide is shown as the above. Wish you can get some help from it. If there is any question, you can consult your dealer. However, if you can’t finish it on your own, you’d better ask a professional for help. If you are still looking for an ideal car stereo for your car, you can refer to this amazing 2012-2013 Skoda RAPID head unit from Seicane. Please click for more details:
With this top 2012-2013 Skoda RAPID head unit in your car, you can easily get to your ideal destinations with the help of the guidance of the 3D GPS. Streaming from music and hands-free calls are available via connecting the bluetooth and your mobile phone. What’s more, the USB connectivity offers compatibility with a variety of media, including MP3 players and more. This car GPS stereo is fully worthwhile of the upgrading for your stock radio.