http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

Category Archives: Ford car DVD

How to install 2008 2009 2010 Ford S-max Radio with 8 steps

If you are fans of SUV, you must find out this image is familiar. Yes, this is Seicane 2008-2010 Ford S-max Radio after installation.

2008-2010  Ford  S-max Radio after installation

2008-2010 Ford S-max Radio after installation

Nowadays, original radio of Ford S-max can’t meet all needs of most people, if you want to improve your driving quality. You can install a new aftermarket radio with useful functions. You may think there is no need to know how to install aftermarket 2008-2010 Ford S-max Radio for there will be someone that can help you finish this work. However, a lot of Ford drivers choose to install it by themselves, this is a real fact.

 

You can also do it if you reading corresponding articles or asking other people what the process is, these are all making comparisons for the installation work.

 

2008 2009 2010 Ford S-max Radio installation

1.Pry down two small trim panels with a plastic tool, then set them aside.

2008 2009 2010 Ford S-max Radio installation step 1

2008 2009 2010 Ford S-max Radio installation step 1

2.Then remove a few screws with a Phillips screwdriver and pull out the top panel.

2008 2009 2010 Ford S-max Radio installation step 2

2008 2009 2010 Ford S-max Radio installation step 2

3.Pry this panel and loosen it.

2008 2009 2010 Ford S-max Radio installation step 3

2008 2009 2010 Ford S-max Radio installation step 3

4.Remove several screws under the trim panel with a screwdriver.

2008 2009 2010 Ford S-max Radio installation step 4

2008 2009 2010 Ford S-max Radio installation step 4

5.Then pull out the trim panel.

2008 2009 2010 Ford S-max Radio installation step 5

2008 2009 2010 Ford S-max Radio installation step 5

6.Remove four screws to remove the factory radio and unplug connectors behind it.

2008 2009 2010 Ford S-max Radio installation step 6

2008 2009 2010 Ford S-max Radio installation step 6

7.Gently make the trim panel out of dashboard after you have removed screws on it, and install new radio to right space

8.Firm screws and tight them beside the radio,make dashboard back coverd on it, whole procedure for it has been finished.

 

Above are all instructions of 2008-2010 Ford S-max Radio installation. And here are something you should notice.

1.Please remember to unplug the negative battery cable before starting stereo removal.

2.Please finish your parking series include turn off all car series functions too.

3.Have a check for your radio include some related objects to car radio, and see whether everything is ok before your installation.

 

Before installation, you should to know whether the new aftermarket radio fits your car, here is a good aftermarket radio of Seicane for 2008-2010 Ford S-max I’d like to share with you:

http://www.seicane.com/android-2008-2009-2010-ford-s-max-radio-dvd-player-gps-navigation-system-bluetooth-capacitive-multi-touch-screen-obd-dvr-usb-sd-rear-view-camera-tv-3g-wifi-mirror-link-ipod-s167017

 

This Ford S-max Radio has intelligent android 4.4.4 operation system, high quality RK 3188 with 1.6 GHz Cortex A9 Quad-core CPU, and 7 inch HD 1024*600 Pixels multi touch screen with smooth operation high sensitivity.

You can watch HD 1080P movies with your family or friends on your car. When you come to a city you’ve never been,you can use the 3D navigation to find the right way.And you can surfing internet via 3G or WiFi when you are waiting for someone.

 

With new Ford S-max Radio, you will have a awesome journey with your Ford S-max.

Posted in Ford car DVD. Tagged with .

How to replace remove install 2007-2010 Ford Mondeo radio

Some of you might be the owners of Ford Mondeo(2007-2010).And you want to remove and install or replace your factory radio to aftermarket radio.But the problem is you have no idea how to remove your Ford Mondeo radio or install the aftermarket radio. So you can only use car radio which was already outdated.It’s so terrible.By the way,today I will tell you how to replace a 2007-2010 Ford Mondeo radio.

Here is the picture for car radio after installaion,dvd gps navigation system of 2007-2010 Ford Mondeo.

2007-2010 Ford Mondeo radio after installation

2007-2010 Ford Mondeo radio after installation

We can remove the factory radio now.

Remove 2007-2010 Ford Mondeo radio

1)Use a lever to pry downer small trim panel and remove it,then same to right side one.

2007-2010 Ford Mondeo radio remove step 1

2007-2010 Ford Mondeo radio remove step 1

2) After removing a few screws with a screwdriver can pull up the top panel.

2007-2010 Ford Mondeo radio remove step 2

2007-2010 Ford Mondeo radio remove step 2

3) With a lever to pry downer and pull out the panel below.

2007-2010 Ford Mondeo radio remove step 3

2007-2010 Ford Mondeo radio remove step 3

4)Remove few screws below the dash board with a screwdriver.

2007-2010 Ford Mondeo radio remove step 4

2007-2010 Ford Mondeo radio remove step 4

5)Then the panel is taken out.

2007-2010 Ford Mondeo radio remove step 5

2007-2010 Ford Mondeo radio remove step 5

6) Remove four screws to remove the factory radio and unplug connectors.

2007-2010 Ford Mondeo radio remove step 6

2007-2010 Ford Mondeo radio remove step 6

Now factory radio is taken out and next step for you is to install new 2007-2010 Ford Mondeo radio.If you haven’t get aftermarket radio before.Or you have no idea which aftermarket radio is suitable for your Ford Mondeo.I’d like share a good aftermarket radio with you:http://www.seicane.com/hot-selling-android-car-dvd-player-for-2007-2010-ford-mondeo-with-radio-gps-navigation-system-hd-touch-screen-obd-dvr-usb-sd-bluetooth-rear-view-camera-tv-3g-wifi-mirror-link-ipod-s167017

This unit has High quality RK3188 1.6 GHz Cortex A9 Quad-core processor with Andriod 4.4 operation system.And it has many useful functions such as 3G&WiFi,App download,3D navigation and so on.

With a new aftermarket radio,we can start to install it into your Ford Mondeo.

Install 2007-2010 Ford Mondeo radio 

First,you should make sure the brake wire earthed ancd close the parental channel function or change grade setting.

1)Put the new aftermarket radio into the dashboard.

2) Mounted on four screws to fix the new radio.

3)Put on the panel make it fit the new radio.

4) Reconnect the car negative battery terminal.

With several steps above,you can enjoy the entertainment with your new Ford Mondeo radio.You can watch HD 1080P movies with your family or friends on your car. When you come to a city you’ve never been,you can use the 3D navigation to find the right way.And you can surfing internet via 3G or WiFi when you are waiting for someone.

Wish the essay can benefit you,and you can enjoy your car life with a best aftermarket radio.

Posted in Ford car DVD. Tagged with .

Easy upgrade steps for 2004-2008 Ford Focus head unit to reo audio support Ipod Multi-Languages  

new audio after installation,radio gps nav system Support 3-zone POP MP5 of 2004-2008 Ford Focus

new audio after installation,radio gps nav system Support 3-zone POP MP5 of 2004-2008 Ford Focus

This picture is new audio after installation,radio gps nav system Support 3-zone POP MP5 of 2004-2008 Ford Focus.If your Ford Focus’s stereo is a factory one,you may find much difference between them.

Obvious on the screen and push buttons.This new Ford Focus head unit has less push buttons and bigger screen which can be operated by touch it with touch screen pen,this is certain-extent like we use cellphones.In addition,its navigation system has become many people’s basic pursuit.

Thus more and more people want to replace their original ones,but have problems on how to do this work.Don’t worry,today I will show you easy upgrade steps for 2004-2008 Ford Focus head unit to reo audio support Ipod Multi-Languages.

Actually it’s not a difficult thing if you have obtained right installation instructions.And here are some suggestions on Ford Focus aftermarket navigation system installation that may benefit you finishing your update work.And before you begin it,remove battery negative lead first.

 2004-2008 Ford Focus original audio removal:

1.You’ll see four horizontal slots if you look closely at the factory radio

You’ll see four horizontal slots if you look closely at the factory radio

You’ll see four horizontal slots if you look closely at the factory radio

2.Make one of the four keys inserted into 4 slots.Curved edge of keys with notch faces inward.Gently wiggle them,until you can feel they have located correctly.If you don’t want to bend the clips behinf,or you’ll struggle to remove the radio.Once you’re sure they’ve located correctly,slide them all the way in,and they should lock in place.

Make one of the four keys inserted into 4 slots

Make one of the four keys inserted into 4 slots

3.Now you should be able to slide out the stereo,with the help of handles on the pins

slide out the stereo,with the help of handles on the pins

slide out the stereo,with the help of handles on the pins

4.Make the wiring plug disconnected,and the radio antenna plug from the back of the stereo

Make the wiring plug disconnected,and the radio antenna plug from the back of the stereo

Make the wiring plug disconnected,and the radio antenna plug from the back of the stereo

2004-2008 Ford Focus new head unit installation:

5.Next step is wires connection,here is the basic wires connection of power and speakers on the plug

basic wires connection

basic wires connection

basic wires connection 2

basic wires connection 2

You’d better check the power connection with a multimeter before applying power cable,then install your car with new stereo

6.Use a firm pull tool to make the two brackets out of original stereo(four screws on each side)

Use a firm pull tool to make the two brackets out of original stereo(four screws on each side)

Use a firm pull tool to make the two brackets out of original stereo(four screws on each side)

After all cables and antennas have been correctly connected,slid the stereo back into the dash and make power cable connected to original place again,then clip in the fascia adaptor,then your installation work is accomplished.

slide the stereo out,using the handles on the pins

Facts shows that a large percent of people have done it without much trouble,and if you want to fully enjoy its advanced features for longer time,you need to pay attentions to the following notes.

Precautions after installation:

1.Touch screen is an very important part,so protecting the screen well by using only touch screen pen or your hand,do not sprin any liquid on it and keep it as neatly as possible

2.You may use clean cloth gently wipe it if you want to clean up the stereo,no any strong chemicals or other damaged cleaning products

Upgrading car stereo is of course wonderful and you can also get much entertainments,but you also may meet some problems on using new radio that affects you,then you can visit next website for answers,or seek help from market staffer: http://www.seicane.com/in-dash-oem-2004-2008-ford-focus-dvd-player-gps-atv-with-bt-radio-usb-sd-support-3-zone-pop-mp5-ipod-multi-languages-3g-wifi-c140.

 

 

Posted in Ford car DVD. Tagged with , , .

Detailed upgrade guide for 2009 2010 2011 2012 Ford F150 F250 F350 CD radio to GPS navigation system

Dear friends,are you a owner of 2009 2010 2011 2012 Ford F150 F250 F350 and have you upgraded your car original audio system to gps navigation system?

With technology rapid development,new dvd radio which fits your series cars have been produced and some new functions are increased and some become more advanced, for example the gps nav system,which is very helpful when someone who are easy to get lost or be lazy to remember routes.

Firstly you can have a look at following head unit after installation,dvd gps navigation with bluetooth music of 2009 2010 2011 2012 Ford F150 F250 F350,and you need to make a comparison with your factory one.

head unit after installation,radio gps navigation with touch screen of 2013 2014 2015 Ford F150 F250 F350

head unit after installation,radio gps navigation with touch screen of 2013 2014 2015 Ford F150 F250 F350

You can make a decision whether you can install a unit like this one into your car and then we come to talk about detailed upgrade guide for 2009 2010 2011 2012 Ford F150 F250 F350 CD radio to GPS navigation system.

If you have make up your mind to replace the head unit for your car,but you know little about it and its upgrade,then you can surf the Internet and visit some websites,for example: http://www.seicane.com/8-inch-2009-2010-2011-2012-ford-f150-f250-f350-expedition-sat-nav-car-a-v-system-lcd-touch-screen-cd-dvd-player-bluetooth-tv-radio-tuner-wifi-3g-aux-auto-a-v-ipod-iphone-1080p-pop-mp3-backup-camera-c222,which can help you get some detailed description and workers there are more professional,they can help you deal with some problems.

In addition,knowing how to operate new unit is very necessary,here is a exact video which is more intuitive,you can have a view at it:

When we have acknowledged so much about aftermarket stereo of Ford F150 F250 F350 cd radio dvd player,then let’s begin theme today.Before you begin any work,please remember to disconnect negative power cable to ensure safety.

 

2009 2010 2011 2012 Ford F150 F250 F350 CD radio removal and dvd GPS radio installation:

1.Get the rubber pad at the top of the radio trim panel out

Get the rubber pad at the top of the radio trim panel out

Get the rubber pad at the top of the radio trim panel out

2.Take the 2 exposed screws out

Take the 2 exposed screws out

Take the 2 exposed screws out

3.Pull side panels containing the a/c vents off the radio trim panel.Please note that it is not necessary to remove the panels completely

Pull side panels containing the a/c vents off the radio trim panel

Pull side panels containing the a/c vents off the radio trim panel

4.Loosen and get the radio trim panel out

Loosen and get the radio trim panel out

Loosen and get the radio trim panel out

5.Make all molex plugs unplugged

Make all molex plugs unplugged

Make all molex plugs unplugged

6.Get 4 screws out to make out the factory radio

Get 4 screws out to make out the factory radio

Get 4 screws out to make out the factory radio

7.Remove original stereo and unplug cables connected it

Remove original stereo

Remove original stereo

unplug cables connected it

unplug cables connected it

You can have a rest for few minutes for you have finished removal task,and then continue to upgrade the stereo.When you are sure that your bought unit fits your car,read installation instructions carefully and tidy well all wires as neatly as possible.

After that,install the new radio into the space.Look around in your car to make sure that you can find screws,panel and pad that are removed before,to use again at later time.

Turn on Ford F150 new head unit,and see whether all functions can operate.If they are ok,it means that your actions are right.But do not be so excited that you do wrong operations to new unit and car,your safety should be ensured at any time.You may try on it and enjoy a wonderful journey.

Precautions after installation:

To make this gps dvd radio can be used longer,I advise you to take care of following notes.

Please use the touch screen pen to control the unit,without using any other sharp objects;try to keep the screen as clean as possible;In addition,note that not to splash any liquid on the screen to avoid unnecessary damage to the stereo.

 

Posted in Ford car DVD. Tagged with , , .