To have a relaxing and pleasant driving experience, it is advisable for you to replace your factory radio with a new aftermarket car stereo which is armed with a number of practical and entertainment features. And you don’t have to worry that the installation is difficult as it can also be finished by yourself under a correct installation guide. The following is a clear removal and installation guide for a 2014 FIAT DOBLO gps dvd car stereo. If you also own a 2014 FIAT DOBLO, you can refer to it so as to help with your car stereo installation.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2014 FIAT DOBLO car stereo installation guide
Step 1. Insert the release keys in the slots of the original radio.
Step 2. Pull outwards to release the original radio.
Step 3. Disconnect the wiring loom and the aerial lead to release the original radio.
Step 4. Unscrew all screw that fixed the original radio’s frame.
Step 5. Take out the original radio’s modified frame.
Step 6. Loose the trim panel and remove it.
Step 7. Check all the accessories for the new Seicane car stereo.
Step 8. Connect the harnesses to the back of the new Seicane car stereo.
Step 9. Connect the Seicane car stereo to your original stereo’s plugs.
Step 10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Step 11. Put the new Seicane car stereo into the dash.
Step 12. Put everything into their original place. All the installation is done.
Wish the above installation guide can be helpful for you. No matter what questions you meet, you can consult your dealer or seek help from someone experienced and a professional. Besides, before the installation, please check whether your car stereo is compatible with your car or not. If the car stereo is not compatible enough, don’t hesitate to change another one. Here comes a Seicane 2014 FIAT DOBLO gps dvd car stereo which I recommend to you. For more details, please click:
With this powerful 2014 FIAT DOBLO gps dvd car stereo installed in your car, your driving experience will be taken up a notch. You can be accurately led to your desired destinations with the help of the high-end built-in 3D GPS navigation system. You can dial, receive or reject as well as enjoy streaming music from your cell phone music playlists through the connection between the car stereo and your car under the Bluetooth technology. Besides, the additional entertainment features of this stereo can also bring you a ton of fun to your driving. Wish you like it and good luck to you!