Detailed installation steps for 2010-2014 Chevrolet Orlando navigation system with Bluetooth DVD

1,077 views

Head unit after upgrade,navigation dvd with touch screen bluetooth function of 2010-2014 Chevrolet Orlando.

Head unit after upgrade,navigation dvd with touch screen bluetooth function of 2010-2014 Chevrolet Orlando

Head unit after upgrade,navigation dvd with touch screen bluetooth function of 2010-2014 Chevrolet Orlando

 

Before we learn about the detailed installation steps for 2010-2014 Chevrolet Orlando navigation system with bluetooth dvd,we can view this front picture first to grasp general idea about the appearance and some new functions of   new autoradio.

If you see it carefully,we can find that this car dvd dashboard has some difference with other ones:this stereo has two operations:one is touch screen which can be operated with a touch screen pen,the other one is push button controls,both ways can operated this unit.Though you are not owner of 2010-2014 Chevrolet Orlando,    there is no matter only if your radio dashboard is alike with above one.

So the next question turns to what steps will we follow about installing Chevrolet Orlando navigation dvd,and it isn’t work that need specialized technology but can be a normal work by ourselves,but under the condition that we have known clearly about its installation instructions.Next comes to main content of this essay.

2010-2014 Chevrolet Orlando original radio removal:

1.Use a removal tool,gently pry the upper vent housing panel from the dash

Use a removal tool,gently pry the upper vent housing panel from the dash

Use a removal tool,gently pry the upper vent housing panel from the dash

2.Lever the shifter surround panel,on manual transmission vehicles,unclip and reposition the shifter

Lever the shifter surround panel

Lever the shifter surround panel

3.Take out 2 screws from the storage pocket,remove storage

Take out 2 screws from the storage pocket,remove storage

Take out 2 screws from the storage pocket,remove storage

4.Take out 4 screws from the accessorv control panel

Take out 4 screws from the accessorv control panel

Take out 4 screws from the accessorv control panel

Take out 4 screws from the accessorv control panel

Take out 4 screws from the accessorv control panel

5.pull out on panel,this panel was very tough to remove,be patient and the clips will release let panel hang to side

pull out on panel

6.Take out 2 screws from the radio control panel, disconnect the radio control panel

Take out 2 screws from the radio control panel, disconnect the radio control panel

Take out 2 screws from the radio control panel, disconnect the radio control panel

7.This is a really strange blue connector you must make out the blue clip completely before removing the real connector,and remove the other clip

make out the blue clip completely before removing the real connector,and remove the other clip

make out the blue clip completely before removing the real connector,and remove the other clip

8.Take out 2 screws from the radio chassis,and 2 screws near the top of the stereo to release the screen

Take out 2 screws from the radio chassis

Take out 2 screws from the radio chassis

 

Take out 2 screws near the top of the stereo to release the screen

Take out 2 screws near the top of the stereo to release the screen

 

9.Take out screen by pulling out,remove behind clip

Take out screen by pulling out

Take out screen by pulling out

10.Take out 2 more screws on stereo

Take out 2 more screws on stereo

Take out 2 more screws on stereo

11.Take out stereo and connectors

Take out stereo and connectors

Take out stereo and connectors

Before we install new unit into car,we can have a look at next video first:

2010-2014 Chevrolet Orlando navigation dvd installation:

factory audio is removed now,the next job is to install GPS radio navigation system,and you need to be more careful in next process.

Next what you need to do is to make cables connection between new unit and car.About this,I advise you to read instructions carefully which is within your bought radio and you can find answers from it.This is a key part of it,so you should be very careful when you are connecting cables and antennas.

After you have connected all cables,tidy them in order to save more spaced for new stereo for the space for them is very limited.After that,install your new radio gps into the car.

Turn on new unit and check whether it can work well.If it’s ok,it means that your work is right.Then you can firm those removed screws to their original places and reinstall storage,shifter,upper vents and housing panel back to right positions.Thus the whole procedure is finished and you will enjoy a good time during your driving.

If you still have some questions about this dvd radio with nav system,they may be sloved by visiting the following website:http://www.seicane.com/in-dash-navigation-multimedia-player-for-2010-2014-chevrolet-orlando-with-pop-gps-3g-wifi-support-e-book-bluetooth-dvd-radio-20-disk-virtual-cd-changer-c155 .

Attention:

Please keep everything which are removed especially the screws for they are small but useful well,they will be used once again in your installation to fix the machine.If you can’t find a necessary thing,

that would be very distraught.

 

Related Posts

Posted in Chevrolet car DVD. Tagged with , , .

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>