Clear Steps to Remove and Install a 2008 2009 2010 2011 2012-2015 Mazda 6 Ultra Car Radio with Bluetooth GPS Navigation System

306 views

If you are not satisfied with your original car radio because it comes with very simple functions which cannot help you enrich your in-car life, then you can consider replacing it with a brand new multifunctional car radio. If you have some related installation experience, with a correct installation guide, you can try to install the new car radio by yourself. The following is a 2008 2009 2010 2011 2012-2015 Mazda 6 Ultra car radio installation guide from Seicane. If you have the same or similar dashboard, you can refer to this guide carefully.

2008 2009 2010 2011 2012-2015 Mazda 6 Ultra Car Radio after installation

2008 2009 2010 2011 2012-2015 Mazda 6 Ultra Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008 2009 2010 2011 2012-2015 Mazda 6 Ultra car radio installation guide

1. Remove the panel on downside of the e-brake. Please make sure your e-brake is up.

Remove the panel on downside of the e-brake. Please make sure your e-brake is up

Remove the panel on downside of the e-brake. Please make sure your e-brake is up

2. Remove the shift knob by screwing it off counterclockwise.

Remove the shift knob by screwing it off counterclockwise

Remove the shift knob by screwing it off counterclockwise

2-1

2-1

3. Remove the plastic part around the shift lever.

Remove the plastic part around the shift lever

Remove the plastic part around the shift lever

4. Release two side trims.

Release two side trims

Release two side trims

4-1

4-1

4-2

4-2

5. Remove the trim pieces around the air conditioning control.You may start from the bottom.

Remove the trim pieces around the air conditioning control.You may start from the bottom

Remove the trim pieces around the air conditioning control.You may start from the bottom

5-1

5-1

6. Remove four screws that fixed the AC control so as to drop down the AC control.

Remove four screws that fixed the AC control so as to drop down the AC control

Remove four screws that fixed the AC control so as to drop down the AC control

6-1

6-1

7. Unscrew two bottom screws that are holding the radio.

Unscrew two bottom screws that are holding the radio

Unscrew two bottom screws that are holding the radio

8. Grab the top panel so as to remove it.

Grab the top panel so as to remove it

Grab the top panel so as to remove it

8-1

8-1

9. Remove two last screws that are holding the radio with a screwdriver.

Remove two last screws that are holding the radio with a screwdriver

Remove two last screws that are holding the radio with a screwdriver

10. Gently take out the original radio.

Gently take out the original radio

Gently take out the original radio

11. Disconnect connectors and cables at the back of the radio. Please use a removal tool to help you.

Disconnect connectors and cables at the back of the radio. Please use a removal tool to help you

Disconnect connectors and cables at the back of the radio. Please use a removal tool to help you

12. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

13. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

14. Connect the Seicane car radio to your original stereo’s plugs.

15. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16. Put the new Seicane car radio into the dash.

17. Put everything into their original place. All the installation is done.

 

Now do you have a general understanding of the installation process on a 2008 2009 2010 2011 2012-2015 Mazda 6 Ultra car radio? If not or you have any problems, you can contact your dealer, communicate with someone experienced or turn to a professional for help. But if you still think it hard for you to finish the whole installation process on your own, you can ask a technician to help you install the new car radio.

To help you pick an ideal car radio for your beloved car, you can check out the following link which is a 2008 2009 2010 2011 2012-2015 Mazda 6 Ultra car radio from Seicane. Here comes the related link, please click:

https://www.seicane.com/8-inch-touch-screen-radio-android-gps-navigation-system-for-2008-2015-mazda6-ultra-with-dvd-player-bluetooth-mirror-link-obd-dvr-rear-view-camera-tv-usb-sd-3g-wifi-s168001

Based on the latest and stable Android 7.1 operation system, a powerful quad-core CPU processor and 2GB RAM, this unit can process the complicated database and the multiple graphic maps more smoothly and quickly.

The built-in 3D GPS navigation system of this unit enables you to easily locate where you are and find the right way to get to any locations you would like to go to through turn-by-turn directions and voice prompts. And this unit’s dual zone function makes it easier for you to play music behind the scene under GPS mode, and the music will switch to GPS voice automatically.

What’s more, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can get access to both Bluetooth hands-free phone calls as well as Bluetooth streaming music from your phone music playlists. Therefore, you can gain a safer, more convenient and relaxing driving.

What are you waiting for? This car radio is at a competitive price now.If you like this unit, don’t hesitate to add it to your shopping cart. Good luck to you!

Related Posts

Posted in Uncategorized. Tagged with .

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>