http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

Category Archives: Chrysler

Upgrade a 2002 2003 2004 2005 Chrysler 300-M head unit with easy 9 steps

Many car owners want to upgrade their factory radio with a new aftermarket car stereo to enjoy more convenience and enjoyment on the way, but some of them worry the installation is too hard and troublesome. As a matter of fact, the installation is mostly quite simple. If you are a green hand on it, you can ask a professional for help. Here I’ d like to introduce a detailed 2002 2003 2004 2005 Chrysler 300-M head unit installation guide from Seicane to you. Wish it can be helpful for you.

2002 2003 2004 2005 Chrysler 300-M head unit  after installation

2002 2003 2004 2005 Chrysler 300-M head unit after installation

 

 

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2002 2003 2004 2005 Chrysler 300-M head unit installation guide

 

1.Loosen the trim panel with a lever.

1.Loosen the trim panel with a lever

1.Loosen the trim panel with a lever

 

2.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

2-2.Take the panel off the dash and disconnect the wires from the car.

 

3.Remove the four screws which are holding the original radio with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.

 

4.Take out the original radio and disconnect the wire harness at the back of the original radio.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

4-2.Take out the unit and disconnect the wire harness at the back of the unit.

 

5.Check all the accessories for the new Seicane unit.

5.Check all the accessories for the new Seicane car radio.

5.Check all the accessories for the new Seicane car radio.

 

6.Connect the Seicane stereo to your original car radio ‘s plugs.

6-1. Connect the Seicane car stereo to your original car radio 's plugs.

6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-2. Connect the Seicane car stereo to your original car radio 's plugs.

6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.

6-3. Connect the Seicane car stereo to your original car radio 's plugs.

6-3. Connect the Seicane car stereo to your original car radio ‘s plugs.

 

7.Put the new Seicane unit into the dash.

7.Put the new Seicane stereo into the dash.

7.Put the new Seicane stereo into the dash.

 

 

8.Turn on the new unit and have a test if the new Seicane unit is working without problem..

9.Put trim panel back on your new Seicane unit after the normal test.

 

Wish the above installation guide for a 2002 2003 2004 2005 Chrysler 300-M head unit can be helpful for you. If you find the above dashboard is different from yours, please don’t worry, you can still refer to it, because the installation is similar on the whole. If you are still looking for an ideal unit for your car, I’d like to recommend this excellent 2002 2003 2004 2005 Chrysler 300-M head unit from Seicane to you, please click for more details:

 

http://www.seicane.com/2002-2005-2006-2007-chrysler-300-limited-touring-300c-300m-gps-radio-bluetooth-dvd-player-navigation-multimedia-audio-system-tv-aux-ipod-iphone-backup-camera-steering-wheel-control-t6015

 

This modern Chrysler 300-M head unit comes with built-in wifi, you can freely surf the internet for online resources and thousands of apps with this fantastic car stereo specially for 2011 2012 2013 Suzuki Swift. You can get the hands-free calling convenience and music streaming enjoyment via the bluetooth connection with your enabled mobile phone. Thanks to the latest GPS navigation system, you can go anywhere without getting lost any more under the guidance of turn-by-turn direction and voice prompts.

 

Just take this amazing Chrysler 300-M head unit on all your trips and have a wonderful time with it. Good luck to you!

Posted in Chrysler. Tagged with .

How to upgrade a 2001 2002 2003 Chrysler Grand Voyager car stereo with  CD DVD Player Bluetooth Music TV USB SD AUX Rearview Camera

Some car owners may desire more features than that the factory radio bring for them. In that case, it’s wise of them to replace the factory radio with a new aftermarket car stereo. If you also have such a plan, it’s advised that you find an installation guide to help with the installation. Now I’ d like to share the professional 2001 2002 2003 Chrysler Grand Voyager car stereo installation instruction from Seicane with you. If you own a Chrysler Grand Voyager, then you can take it as a reference.

2001 2002 2003 Chrysler Grand Voyager car stereo after installation

2001 2002 2003 Chrysler Grand Voyager car stereo after installation

 

 

Some tips before the installation:

  1. Please disconnect the power before the installation.
  2. Please prepare a lever and a screwdriver before the removal and the installation.
  3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
  4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2001 2002 2003 Chrysler Grand Voyager car stereo installation guide

 

1.Remove the trim piece above cup holder with a lever.

1.Remove the trim piece above cup holder with a lever.

1.Remove the trim piece above cup holder with a lever.

 

2.Remove 2 screws behind the trim piece.

2.Remove 2 screws behind the trim piece.

2.Remove 2 screws behind the trim piece.

 

3.Gently pry around the side of trim panel with the lever and then remove the trim panel.

3.Gently pry around the side of trim panel with the lever and then remove the trim panel.

3.Gently pry around the side of trim panel with the lever and then remove the trim panel.

 

4.Remove 4 screws which holds the factory radio in place.

4.Remove 4 screws which holds the factory radio in place.

4.Remove 4 screws which holds the factory radio in place.

 

5.Take out the factory radio.

5.Take out the factory radio.

5.Take out the factory radio.

 

6.Disconnect the smaller harness on the behind of the factory radio.

6.Disconnect the smaller harness on the behind of the factory radio.

6-1.Disconnect the smaller harness on the behind of the factory radio.

6-2. Check all the accessories for the new Seicane car radio.

6-2. Check all the accessories for the new Seicane car radio.

 

7.Connect the Seicane stereo to your original car radio ‘s plugs.

7. Connect the Seicane car radio to your original car radio 's plugs.

7. Connect the Seicane car radio to your original car radio ‘s plugs.

 

8.Connect the smaller harness at the back of the new Seicane stereo.

9.Put the new Seicane stereo back into the dash.

10.Install four screws and trim panel.

11.Install 2 screws behind the trim piece and the trim piece.

12.Turn on the new radio and have a comprehensive test.

13.Tidy up everything in your car, and all the installation is done.

 

Can you understand all the steps for the installation of the 2001 2002 2003 Chrysler Grand Voyager car stereo? If not, you can seek help from your dealer. If you are a total green hand on the installation of a new stereo, you’d better ask a professional to help you.

 

Before the installation, it’s necessary for you to make sure you have a fitting stereo for your car. If you have no idea about it, I’d like to introduce a great 2001 2002 2003 Chrysler Grand Voyager car stereo from Seicane to you, you can take it as a reference, please click for more details:

 

http://www.seicane.com/2001-2002-2003-2004-2007-chrysler-300m-pt-cruiser-sebring-concorde-grand-voyager-town-country-autoradio-navigation-stereo-cd-dvd-player-bluetooth-music-tv-usb-sd-aux-rearview-camera-ipod-mp3-dual-zone-t6096

 

This OEM Chrysler Grand Voyager car stereo is designed with the same shape and dimension as the original radio, now you can install it in your car to upgrade the radio capabilities in your car. The built-in GPS navigation system of high accuracy can lead you to a lot of locations with its turn-by-turn direction and voice prompts. You can also utilize its bluetooth technology to make and receive hands-free calls and stream music to keep safe and enjoyable on all trips.

Posted in Chrysler. Tagged with .

Easy installation on 2002 2003 2004 Chrysler Interpid radio with built-in GPS DVD player Bluetooth

With the technology changing day by day, you may find it a little dissatisfying with the single function which can’t meet all your needs in your factory radio. In this case, it’s wise of you to upgrade a new radio with a number of up-to-date and practical features in your car, which can not only take your in-car environment to next level, but also bring you a brand new driving experience. If you own a Chrysler Interpid from 2002 to 2004, you need to replace your factory radio with a new 2002 2003 2004 Chrysler Interpid radio accordingly.

2002 2003 2004 Chrysler Interpid radio  after installation

2002 2003 2004 Chrysler Interpid radio after installation

Installing a new car radio is just an easy job to some car owners If you have some similar experience and get a detailed guide for the installation. Therefore, the following instruction about the installation of a 2002 2003 2004 Chrysler Interpid radio can be taken as a reference for those car owners who want to do it by themselves. However, if you are unsure the installation, you’d better ask a professional technician for help in case of unexpected damage caused by incorrect installation.

 

Precautions before the installation:

  • Please disconnect the negative cable of the battery for your safety.
  • Please prepare a lever and a screwdriver before the installation.

 

The below is the step-by-step instruction on how to upgrade a 2002 2003 2004 Chrysler Interpid radio.

  1. Remove the trim piece above cup holder with a lever.

    2002 2003 2004 Chrysler Interpid radio  installation step 1

    2002 2003 2004 Chrysler Interpid radio installation step 1

  2. Remove 2 screws behind the trim piece.

    2002 2003 2004 Chrysler Interpid radio installation step 2

    2002 2003 2004 Chrysler Interpid radio installation step 2

  3. Gently pry around the side of trim panel with the lever and then remove the trim panel.

    2002 2003 2004 Chrysler Interpid radio installation step 3

    2002 2003 2004 Chrysler Interpid radio installation step 3

  4. Remove 4 screws which holds the factory radio in place.

    2002 2003 2004 Chrysler Interpid radio installation step 4

    2002 2003 2004 Chrysler Interpid radio installation step 4

  5. Take out the factory radio.

    2002 2003 2004 Chrysler Interpid radio installation step 5

    2002 2003 2004 Chrysler Interpid radio installation step 5

  1. Disconnect the smaller harness on the behind of the factory radio.

    2002 2003 2004 Chrysler Interpid radio installation step 6

    2002 2003 2004 Chrysler Interpid radio installation step 6

  2. Connect the cables of the new Seicane car stereo according to the guidance of the user manual.
  3. Connect the smaller harness at the back of the new radio.
  4. Put the new Seicane car stereo back into the dash.
  5. Install four screws and trim panel.
  6. Install 2 screws behind the trim piece and the trim piece.
  7. Turn on the new radio and have a comprehensive test.

 

That’s all about the instruction of the installation of a new 2002 2003 2004 Chrysler Interpid radio. Wish you can get help from it. You can turn to your dealer for further help if you have any question during the installation. To make sure you have a correct car radio upgraded in your car, I’d like to share an amazing car radio from Seicane which can perfectly fit your 2002 2003 2004 Chrysler Interpid:

 

http://www.seicane.com/seicane-s09201-android-4-4-4-aftermarket-car-stereo-navigation-system-for-2002-2003-2004-dodge-interpid-with-dvd-player-radio-wifi-obd2-bluetooth-mirror-link-hd-1024-600-touch-screen-dvr-tv-video-usb-sd-quad-core-cpu-rearview-camera

 

Upgraded to an advanced Android 4.4.4 operation system and a powerful RK PX3 1.6 GHz Quad-core CPU, you can maximize your enjoyment in your car with this amazing 2002 2003 2004 Chrysler Interpid radio which is compatible with a number of audio and video formats like DVD/DVD-R/DVD±RW/HDCD/CD-R/CD±RW/MP3/MP4/Picture CD/VCD/WMA. The worldwide real-time GPS navigation system is your best road companion to your desired destination with its most accurate direcion and voice prompts. To utilize the bluetooth technology, you can make and receive hands-free calls and stream music to keep safer and more pleasant during your whole driving. Just let this fantastic 2002 2003 2004 Chrysler Interpid radio be your perfect road companion!

Posted in Chrysler. Tagged with .

Detailed guide on upgrading a 2007 2008 2009 2010 Chrysler Sebring head unit with CANBUS GPS DVD player

One of the simplest way to upgrade your in-car environment is to replace your factory radio in your 2007 2008 2009 2010 Chrysler Sebring with a brand new Chrysler Sebring head unit with a variety of the latest, practical and entertainment features. Install a new head unit in your vehicle, you can not only travel to anywhere you’d like with the most accurate direction but also you can put your car into an entertainment warehouse with the powerful DVD player and a number of fun options.

 

2007 2008 2009 2010 Chrysler Sebring head unit after installation

2007 2008 2009 2010 Chrysler Sebring head unit after installation

If you ever installed a car stereo before, to replace a new head unit is just a do-it-yourself job. Generally speaking, an aftermarket car stereo is plug and play. The installation is easy, and you don’t have to modify or cut any wire of your car to make it install. A detailed guide about how to install a 2007 2008 2009 2010 Chrysler Sebring head unit in your car is as follows to help you upgrade your factory radio.

 

Preparations before the installation:

  1. Please remove the negative cable from the vehicle battery for safety.
  2. Please prepare a lever and a screwdriver for the installation.

 

The below is the step-by-step instructions about the installation of a 2007 2008 2009 2010 Chrysler Sebring head unit.

 

  1. Loosen the trim panel with a lever.

    2007 2008 2009 2010 Chrysler Sebring head unit  installation step 1

    2007 2008 2009 2010 Chrysler Sebring head unit installation step 1

  2. Take the panel off the dash and disconnect the wires from the car.

    2007 2008 2009 2010 Chrysler Sebring head unit  installation step 2-1

    2007 2008 2009 2010 Chrysler Sebring head unit installation step 2-1

    2007 2008 2009 2010 Chrysler Sebring head unit  installation step 2-2

    2007 2008 2009 2010 Chrysler Sebring head unit installation step 2-2

  3. Remove the four screws which are holding the unit with a screwdriver.

    2007 2008 2009 2010 Chrysler Sebring head unit installation step 3

    2007 2008 2009 2010 Chrysler Sebring head unit installation step 3

  4. Take out the unit and disconnect the wire harness at the back of the unit.

    2007 2008 2009 2010 Chrysler Sebring head unit  installation step 4-1

    2007 2008 2009 2010 Chrysler Sebring head unit installation step 4-1

    2007 2008 2009 2010 Chrysler Sebring head unit installation step 4-2

    2007 2008 2009 2010 Chrysler Sebring head unit installation step 4-2

  1. Connect the new wiring harness adaptor to the car, then, to the unit.

    2007 2008 2009 2010 Chrysler Sebring head unit installation step 5-1

    2007 2008 2009 2010 Chrysler Sebring head unit installation step 5-1

    2007 2008 2009 2010 Chrysler Sebring head unit  installation step 5-2

    2007 2008 2009 2010 Chrysler Sebring head unit installation step 5-2

  1. Connect the wire as the user manual shows and put the new Seicane unit into the dash.

    2007 2008 2009 2010 Chrysler Sebring head unit  installation step 6

    2007 2008 2009 2010 Chrysler Sebring head unit installation step 6

 

7.Turn on the new Seicane unit and have a test.

8.Put trim panel back to its original place after the normal test.

 

The above is all the whole instruction of a 2007 2008 2009 2010 Chrysler Sebring head unit. Wish it can be helpful if you are going to replace your factory radio. Before you upgrade a new head for your car, one of the most important thing is that you have to be 100% sure that unit can fit your car. If you don’t have a head unit for your car, I’d like to recommend one from Seicane for you.

 

http://www.seicane.com/seicane-s09202-chrysler-sebring-android-4-4-4-radio-dvd-player-gps-navigation-system-mirror-link-hd-1024-600-touch-screen-dvr-rearview-camera-tv-wifi-canbus-obd2-bluetooth-usb-sd-steering-wheel-control-quad-core-cpu-video

 

Built-in Android 4.4.4 operation system and a faster and more stable Quad-core-CPU, this Seicane unit might be the best and fastest DVD player ever for 2007 2008 2009 2010 Chrysler Sebring. There are many attractive features for this GPS DVD Car Audio System, which includes 3D GPS, FM/AM radio, DVD, Bluetooth music, backup camera, MP3 and also comes with customized beautiful front panel. Install this 2007 2008 2009 2010 Chrysler Sebring head unit in your vehicle, it will perfectly upgrade your factory CD radio unit with its all-in-one DVD multimedia player and GPS navigation system.

Posted in Chrysler. Tagged with .

How to upgrade a 2002 2003 2004 Chrysler Concorde head unit with GPS DVD Bluetooth touch screen

It is quite normal that you find malfunction or something dissatisfying with your factory radio with single function after several years’ use. If you are a car owner of 2002 2003 2004 Chrysler Concorde and want to have a brand new in-car environment and a different driving experience, it’s strongly recommended to upgrade the factory radio with a modern Chrysler Concorde head unit.

2002 2003 2004 Chrysler Concorde head unit  after installation

2002 2003 2004 Chrysler Concorde head unit after installation

Some owners may worry about the complicated installation and dare not upgrade their factory radio with a new one. Actually, since no wire of your car needs to be cut or modified, the installation of a new head unit is quite easy that some owners can totally do it by themselves at their home. However, if you have no experience on the installation of a new head unit, it’s wise of you to have it installed in case of some unexpected damage which may be caused during the whole installation. The following is the detailed instruction about how to upgrade a 2002 2003 2004 Chrysler Concorde head unit with GPS DVD Bluetooth touch screen.

 

Precautions before the installation:

  • Please disconnect the negative cable of the battery for your safety.
  • Please prepare a lever and a screwdriver before the installation.

 

The below is the step-by-step instruction on how to upgrade a 2002 2003 2004 Chrysler Concorde head unit:

 

  1. Remove the trim piece above cup holder with a lever.

    2002 2003 2004 Chrysler Concorde head unit installation step 1

    2002 2003 2004 Chrysler Concorde head unit installation step 1

  2. Remove 2 screws behind the trim piece.

    2002 2003 2004 Chrysler Concorde head unit installation step 2

    2002 2003 2004 Chrysler Concorde head unit installation step 2

  3. Gently pry around the side of trim panel with the lever and then remove the trim panel.

    2002 2003 2004 Chrysler Concorde head unit installation step 3

    2002 2003 2004 Chrysler Concorde head unit installation step 3

  4. Remove 4 screws which holds the factory radio in place.

    2002 2003 2004 Chrysler Concorde head unit installation step 4

    2002 2003 2004 Chrysler Concorde head unit installation step 4

  5. Take out the factory radio.

    2002 2003 2004 Chrysler Concorde head unit installation step 5

    2002 2003 2004 Chrysler Concorde head unit installation step 5

  1. Disconnect the smaller harness on the behind of the factory radio.

    2002 2003 2004 Chrysler Concorde head unit installation step 6

    2002 2003 2004 Chrysler Concorde head unit installation step 6

  2. Connect the cables of the new head unit according to the guidance of the user manual.
  3. Connect the smaller harness at the back of the new radio.
  4. Put the new dead unit back into the dash.
  5. Install four screws and trim panel.
  6. Install 2 screws behind the trim piece and the trim piece.
  7. Turn on the new radio and have a comprehensive test.

 

Above all, wish the step-by-step instruction can be helpful for you. Please note that there may be a little difference on the dashboard between different years of the car, if you find the difference between the above pictures and your own car, you can ask the dealer for corresponding detailed instructions.

 

To upgrade with a new car head unit, the first and foremost thing is to find a suitable car stereo for your 2002 2003 2004 Chrysler Concorde. If you have no idea which one can fit your car, I’d like to share an amazing 2002 2003 2004 Chrysler Concorde head unit from Seicane to you as a reference.

 

http://www.seicane.com/all-in-one-car-radio-gps-dvd-player-for-2001-2002-2003-2004-2005-chrysler-voyager-with-bluetooth-music-hd-1080p-video-aux-dvr-wifi-3g-backup-camera-c201

With the upgraded WINCE 6.0 CORE operation system and the improved frameware, this popular double din 2002 2003 2004 Chrysler Concorde head unit can perfectly replace the factory radio in your vehicle. The built-in GPS navigation system to provide turn-by-turn direction and voice prompts can guide you to a lot of locations within the least time. The Bluetooth technology allows you to wirelessly your enabled mobile phone with this unit for hands-free calls and streaming music to have a safe and cheerful driving. What’s more, its powerful multimedia player supports playing region-free all the way in your vehicle.  DVD, VCD, CD, Ipod, FM/AM radio for you to relax.

 

Take this 2002 2003 2004 Chrysler Concorde head unit and set off with a new driving experience from now on!

Posted in Chrysler. Tagged with .

12 steps to upgrade a 2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio with DVD Bluetooth GPS Ipod wifi

Are you dissatisfied with the single function of the factory radio in your vehicle and yearning for an ideal replacement to upgrade it? If your answer is yes, then it’s time take some actions to make your dream come true. If you are a owner of 2002 2003 2004 2005 2006 Chrysler Sebring Sedan, upgrading your factory radio with an multifunctional Chrysler Sebring Sedan aftermarket radio can let you not only gain the greatest convenience but also have the maximum enjoyment in your vehicle.

 

However, some car owners are still hesitant for the concern that the complicated installation may cause some irreparable damage to their cars. As a matter of fact, the installation is a quite easy job, and some car owners can deal with the whole process by themselves. But if you haven’t installed an aftermarket radio before, it’s wise of you to have it installed at a car stereo upgrade store or ask for a professional technician to help. If you are gonging to install it a 2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio by yourself, you could take the following guide as an reference.

2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio after installation

2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio after installation

Precautions before the installation:

  • Please disconnect the negative cable of the battery for your safety.
  • Please prepare a lever and a screwdriver before the installation.

 

The below is the step-by-step instruction on how to upgrade a 2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio:

 

  1. Remove the trim piece above cup holder with a lever.

    2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio installation step 1

    2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio installation step 1

  2. Remove 2 screws behind the trim piece.

    2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio installation step 2

    2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio installation step 2

  3. Gently pry around the side of trim panel with the lever and then remove the trim panel.

    2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio installation step 3

    2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio installation step 3

  4. Remove 4 screws which holds the factory radio in place.

    2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio installation step 4

    2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio installation step 4

  5. Take out the factory radio.

    2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio installation step 5

    2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio installation step 5

  1. Disconnect the smaller harness on the behind of the factory radio.

    2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio installation step 6

    2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio installation step 6

  2. Connect the cables of the new head unit according to the guidance of the user manual.
  3. Connect the smaller harness at the back of the new radio.
  4. Put the new dead unit back into the dash.
  5. Install four screws and trim panel.
  6. Install 2 screws behind the trim piece and the trim piece.
  7. Turn on the new radio and have a comprehensive test.

 

That’s all about the whole process of installing a new 2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio. Wish it’s helpful for you. If you still have any questions, please turn to the dealer for help.

 

If you don’t have an ideal replacement for your 2002 2003 2004 2005 2006 Chrysler Sebring Sedan, I’d like to share a popular aftermarket radio for you which is from Seicane and can be perfectly installed in a 2002 2003 2004 2005 2006 Chrysler Sebring Sedan.

 

http://www.seicane.com/all-in-one-car-radio-gps-dvd-player-for-2001-2002-2003-2004-2005-chrysler-voyager-with-bluetooth-music-hd-1080p-video-aux-dvr-wifi-3g-backup-camera-c201

 

As a multifunctional 2002 2003 2004 2005 2006 Chrysler Sebring Sedan aftermarket radio, it functions as not only a remarkable GPS navigation system to provide turn-by-turn directions, intelligent route planning, lane assist and voice prompts for you to arrive at your destination but also an amazing multimedia player to play all DVDs, VCDs, CDs, TV programs, Ipod, FM/AM radio to keep you and your passengers entertained all the way. So why don’t you take it and have a totally different driving experience now?

Posted in Chrysler. Tagged with .

Step-by-step installation guide about the 2002 2003 2004 Chrysler 300M car stereo with GPS blueooth Ipod

If you find the factory radio in your vehicle may not function as well as it did before, don’t feel upset or desperate. It isn’t an unusual thing that a factory radio will malfunction after several year’s use. However, to make a radio work well in your vehicle or have a even better one in it, you can replace the factory radio with a brand-new car stereo with a large amount of features.  It is of great importance that you should replace with a correct head unit which can fit your car perfectly. For example, if you are a car owner of 2002 2003 2004 Chrysler 300M, you can upgrade you in-car environment with a 2002 2003 2004 Chrysler 300M car stereo with GPS Bluetooth DVD Ipod.

To better assist you in upgrading your factory radio. Here’s something important about the installation should arouse your attention. Generally speaking, the installation is so easy that it can be done by one in his own home. However, if you don’t have any experience on how to install a new head unit, you’d better ask a professional technician for help in case some unexpected damage caused during the installation. The following is the step-by-step installation guide about the 2002 2003 2004 Chrysler 300M car stereo for you to as a reference.

2002 2003 2004 Chrysler 300M car stereo after installation

2002 2003 2004 Chrysler 300M car stereo after installation

Precautions:

  • To keep safe, please disconnect the negative cable of the battery.
  • Please prepare a lever and a screwdriver before the installation.

 

The detailed instruction about the installation of a 2002 2003 2004 Chrysler 300M car stereo as follows:

 

  1. Remove the trim piece above cup holder with a lever.

    2002 2003 2004 Chrysler 300M car stereo installation step 1

    2002 2003 2004 Chrysler 300M car stereo installation step 1

  2. Remove 2 screws behind the trim piece.

    2002 2003 2004 Chrysler 300M car stereo installation step 2

    2002 2003 2004 Chrysler 300M car stereo installation step 2

  3. Gently pry around the side of trim panel with the lever and then remove the trim panel.

    2002 2003 2004 Chrysler 300M car stereoinstallation step 3

    2002 2003 2004 Chrysler 300M car stereoinstallation step 3

  4. Remove 4 screws which holds the factory radio in place.

    2002 2003 2004 Chrysler 300M car stereo installation step 5 (2)

    2002 2003 2004 Chrysler 300M car stereo installation step 4

  5. Take out the factory radio.

    2002 2003 2004 Chrysler 300M car stereo installation step 5

    2002 2003 2004 Chrysler 300M car stereo installation step 5

  1. Disconnect the smaller harness on the behind of the factory radio.

    2002 2003 2004 Chrysler 300M car stereo installation step 6

    2002 2003 2004 Chrysler 300M car stereo installation step 6

  2. Connect the cables of the new head unit according to the guidance of the user manual.
  3. Connect the smaller harness to the behind of the new radio.
  4. Put back the new dead unit into the dash.
  5. Firm four screws and trim panel.
  6. Firm 2 screws behind the trim piece and the trim piece.
  7. Turn on the new radio and have a comprehensive test.

 

May the above installation guide can be helpful for you. If you are still considering the upgrade and don’t have an ideal car stereo for your 2002 2003 2004 Chrysler 300M, I ‘d like to share a remarkable head unit from Seicane which can work well with 2002 2003 2004 Chrysler 300M.

 

http://www.seicane.com/all-in-one-car-radio-gps-dvd-player-for-2001-2002-2003-2004-2005-chrysler-voyager-with-bluetooth-music-hd-1080p-video-aux-dvr-wifi-3g-backup-camera-c201

 

 

This car stereo is designed as the factory radio with a lot of upgraded components and software. You can find you way to your desired destination with the help of the turn-by-turn direction and voice prompts offered by the 3D GPS navigation system. After the upgrade, your steering wheel control can still work, so you can control the volume with it. As long as you can reach a wifi hotspot, you can surf the internet freely for convenience and entertainment with the wifi built in this unit. Take this 2002 2003 2004 Chrysler 300M car stereo with you, a relaxing and wonderful driving experience will be always with you!

Posted in Chrysler. Tagged with .

How to install a 2005 2006 2007 Chrysler 300C aftermarket radio with GPS Bluetooth Multimedia DVD Player

To upgrade your factory radio with a modern multifunctional head unit for the greatest convenience and the maximum entertainment in your vehicle is really amazing. It is a simple but also sophisticated task. To install a new Chrysler 300C aftermarket radio is quite simple, it’s just plug and play and the installation is quite easy. However, what makes it difficult is to find a correct aftermarket which can fit your vehicle without no problem.

2005 2006 2007 Chrysler 300C aftermarket radio after installation

2005 2006 2007 Chrysler 300C aftermarket radio after installation

Even though the installation isn’t too hard for a car owner to finish, there are still some things you need to pay attention to. First of all, if you don’t have any experience on how to install a new aftermarket, you’d better go to a car stereo shop to install it. Secondly, if you want to do it by yourself, it’s suggested that you should ask for the detailed instruction about the installation from the dealer and then install it under the guidance of a professional technician. To be exact, the following is the installation guide for a 2005 2006 2007 Chrysler 300C aftermarket radio.

 

 

Precautions before the installation:

  1. For your safety, please remove the negative cable on the vehicle battery.
  2. Please prepare a lever and a screwdriver for the installation.

 

The below is the detailed instructions on how to install a 2005 2006 2007 Chrysler 300C aftermarket radio: 

 

Step 1: Remove the trim panel with the lever.

Please pry the trim panel from the bottom to the top, and then left to right with a lever for several times until the trim panel is loosened. Then, use your hands to loosen the trim panel. After that, please carefully take the trim panel off the dashboard. Please notice that the wires at the back of the trim panel needs to be removed before taking the trim panel down.

 

2005 2006 2007 Chrysler 300C aftermarket radio installation step 1

2005 2006 2007 Chrysler 300C aftermarket radio installation step 1

Step 2: Remove the factory radio.

Please remove the screws holding on the radio with a screwdriver. Take the factory radio out of the dash carefully and then disconnect the wires at the back of it. At last, place the radio aside carefully.

 

2005 2006 2007 Chrysler 300C aftermarket radio installation step 2

2005 2006 2007 Chrysler 300C aftermarket radio installation step 2

 

Step 3: Connect the wires to the new radio and install it.

Please connect the new unit to the original wiring harness correctly as the user manual shows. Then put the new radio into the dash, then turn on it and have a comprehensive check. Please pay attention to GPS, TV, radio functions which have special requirements on antennas and wirings.

 

Step 4: Install the trim panel.

If everything works well on the new radio, please install the screws into their original place. Then please install the trim panel.

 

 

The above is the step-by-step installation on how to install a new 2005 2006 2007 Chrysler 300C aftermarket radio. To make sure you have the right head unit installed, please check the following link which is an intelligent head unit for 2005 2006 2007 Chrysler 300C:

 

http://www.seicane.com/in-dash-chrysler-300c-multimedia-dvd-player-gps-3d-navigation-audio-system-with-bluetooth-radio-tv-usb-sd-3g-wifi-c206

 

 

This WINCE 6.0 CORE radio DVD player GPS navigation system can perfectly fit 2005 2006 2007 Chrysler 300C. With the built-in GPS navigation system, you won’t get lost no matter you are travelling around the whole country or finding a closest gas station. To have hands-free calls for safety, you just need to simply sync your mobile phone with this unit, besides, you can also stream music from the playlist in your mobile phone.  With wifi connection built in, you can freely surf the internet and download the apps on the android market to meet all your needs when you are in the range of the wifi hotspot. You can turn your vehicle into an entertainment warehouse with its remarkable multimedia functions which include DVD, VCD, CD, Ipod, bluetooth music, TV programs. Furthermore, the USB/SD/Ipod connection will definitely offer much fun and pleasure to you and your passengers on all trips. Just take this 2005 2006 2007 Chrysler 300C aftermarket radio to have a different driving experience!

Posted in Chrysler. Tagged with .

Car stereo upgrade for 2001- 2005 Chrysler Voyager with dvd GPS touch screen AUX

If your Chrysler Voyager of 2001-2005 have not upgraded your car stereo for some reasons,today I will help you to solve some of them,

including that if you want to finish it yourself,exactly I will show you specific steps for car stereo

upgrade for 2001- 2005 Chrysler Voyager with dvd GPS touch screen AUX and this is also my

object.

 

Next  is the head unit car stereo after upgrade,dvd player with gps nav system of 2001-2005

Chrysler Voyager.

Head unit car stereo after upgrade,dvd player with gps nav system of 2001 2002 2003 2004 2005 Chrysler Voyager

Head unit car stereo after upgrade,dvd player with gps nav system of 2001 2002 2003 2004 2005 Chrysler Voyager

 

Except for 2001-2005 Chrysler Voyager,the new unit also fits many other cars,including

1999-2004 Jeep Grand Cherokee, 2003-2005 Jeep Wrangler,2002-2007 Jeep Liberty ,

2001-2005 Chrysler Grand Voyager ,2002-2004 Chrysler 300M Concorde,2003-2005

Chrysler PT Cruiser,2002-2006 Chrysler Sebring Dodge RAM,2004-2007 Chrysler

Town & Country,2002-2004 Dodge Dakota,2004-2005 Dodge 1500  2500 3500 Pickup,

2004-2005 Dodge Neon Stratus Intrepid, 2002-2006 Dodge,2004-2007 Dodge Caravan,

2005-2006 Dodge Viper.

 

After watching this suitable stereo from a car shop,most of you may be eager to know how to

install Chrysler Voyager dvd radio.

 

Don’t worry,the first thing you should do is to choose a suitable unit for your car.If you want to

do it yourself,then you need to find a unit whose panel is the same to your factory one’s.Or you

can directly ask someone who works in the shop or on the Internet,they will find you a right one.

 

It’s not exactly right to think that installing a head unit of the car is a thing for special man.

However many people have succeed achieving it by themselves,it’s a real fact.How can they

do this? Actually it’s not a difficult thing when you have grasped right installation instruction.

 

Before I show you detailed procedure for its installation which may benefit you getting over

upgrade job,here are some notes but important for you.

 

Precautions before installation:

1.You’d better make enough preparations for this work and ask someone else beside to give

you a hand

2.Please ensure that you have done all car parking affairs to make sure your safety

3.Please remember to disconnect battery negative lead,or it may be dangerous during next

process

 

Before you begin to install new unit in your car,you can have a view at next video,it’s short

but will show you general things on using the dvd player:

2001-2005 Chrysler Voyager original radio removal:

1.Use a pay tool to lever edges of the trim panel

Use a pay tool to lever edges of the trim panel

Use a pay tool to lever edges of the trim panel

2.Remove trim panel after it is released

Remove trim panel after it is released

Remove trim panel after it is released

3.Use a screwdriver to remove 4 screws which has two on each side

Use a screwdriver to remove 4 screws which has two on each side

Use a screwdriver to remove 4 screws which has two on each side

4.Then you can take out CD player

take out CD player

take out CD player

5.You can find that there are cables behind it,so you need to make them disconnected.

Some of them may be very tough to remove,so you should be patient to remove them

make all cables behind the stereo disconnected

make all cables behind the stereo disconnected

6.This is the original stereo of the car,if you are careful enough,you will find that model of it is similar to the stereo which

is showed at the beginning of this article

original stereo of the car

original stereo of the car

2001-2005 Chrysler Voyager gps dvd installation:

Next connecting the antennas,cables and connectors correctly is the most important,you can

do the connection after carefully reading the upgrade guide that is within your bought stereo.

There should be detailed introduction on it,you need to act this connection as it shows step by step.

After that,install new radio in car and turn on it.If it works,then make all other parts back to car.

 

Wish you good luck!

 

And if you are not very sure about the functions of new unit,then you can have a patient look at next

website,it will show you what you want:http://www.seicane.com/all-in-one-car-radio-gps-dvd-play

er-for-2001-2002-2003-2004-2005-chrysler-voyager-with-bluetooth-music-hd-1080p-video-aux

-dvr-wifi-3g-backup-camera-c201.

 

 

Posted in Chrysler. Tagged with , .

2001 2002 2003 2004 2005 Chrysler Voyager cd radio upgrade to gps dvd with navigation system

Next image is new stereo after upgrade,dvd player with gps navigation of 2001 2002 2003 2004 2005 Chrysler Voyager.

new stereo after upgrade,dvd player with gps navigation of 2001 2002 2003 2004 2005 Chrysler Voyager

new stereo after upgrade,dvd player with gps navigation of 2001 2002 2003 2004 2005 Chrysler Voyager

If your Chrysler Voyager of 2001 2002 2003 2004 2005 have not upgraded your car stereo for some reasons,today I will help you to solve some of them,including that if you want to finish it yourself,exactly I will show you specific steps for 2001 2002 2003 2004 2005 Chrysler Voyager cd radio upgrade to gps dvd with navigation system and this is also my object.

Except 2001 2002 2003 2004 2005 Chrysler Voyager,the new unit also fits many other cars,including 1999-2004 Jeep Grand Cherokee, 2003-2005 Jeep Wrangler,2002-2007 Jeep Liberty ,2001-2005 Chrysler Grand Voyager ,2002-2004 Chrysler 300M Concorde,2003-2005 Chrysler PT Cruiser,2002-2006 Chrysler Sebring Dodge RAM,2004-2007 Chrysler Town & Country,2002-2004 Dodge Dakota,2004-2005 Dodge 1500  2500 3500 Pickup,2004-2005 Dodge Neon Stratus Intrepid, 2002-2006 Dodge,2004-2007 Dodge Caravan,2005-2006 Dodge Viper.

After watching that applied stereo from a car shop,most of you may be eager to know how to remove Chrysler Voyager cd radio and replace it with a dvd player.Don’t worry,the first thing you should do is to choose a suitable unit for your car.If you want to do it yourself,then you need to find a unit whose panel is the same to your factory one’s.Or you can directly ask someone who works in the shop or on the Internet,they will find you a right one.

It’s not exactly right to think that installing a head unit of the car is a thing for special man.However many people have succeed achieving it by themselves,it’s a real fact.How can they do this? Actually it’s not a difficult thing when you have grasped right installation instruction.

Before I show you detailed procedure for its installation which may benefit you getting over upgrade job,here are some notes but important for you.

Some notes before installation:

1.Please ensure that you have done all car parking affairs to make sure your safety

2.Please remember to disconnect battery negative lead,or it may be dangerous during next process

3.You’d better make enough preparations for this work and ask someone else beside to give you a hand

Before you begin to operate new unit of your car,you can have a view at next video,it’s short but will tell you general things on using the dvd player:

2001 2002 2003 2004 2005 Chrysler Voyager cd radio removal:

1.Use a pry tool,prize trim panel’s edges

Use a pry tool,prize trim panel's edges

Use a pry tool,prize trim panel’s edges

2.Remove trim panel after it is released

Remove trim panel after it is released

Remove trim panel after it is released

3.Remove 4 screws which has two on each side with a screwdriver

Remove 4 screws which has two on each side with a screwdriver

Remove 4 screws which has two on each side with a screwdriver

4.After that you can take CD player out easily

take CD player out easily

take CD player out easily

5.You see that there are cables behind the stereo,so you need to unplug them.Some of them may be very tight,so you should be patient to do this work

unplug all antennas behind the stereo

unplug all antennas behind the stereo

6.Original stereo after removal,if you are careful enough,you will find that panel of it is similar to the audiowhich is showed at the beginning of this article

Original stereo after removal

Original stereo after removal

2001 2002 2003 2004 2005 Chrysler Voyager gps dvd installation:

In the following process, correctly connecting the antennas,cables and connectors is the most important,you can do the connection after carefully reading the upgrade guide that is within your bought stereo.There should be detailed introduction on it,you need to act this connection as it shows step by step.

After that,install new radio in car and turn on it.If it works,then make all other parts back to car.

Wish you good luck!If you are not very sure about the functions of new unit,then you can have a patient look at next website,it will show you what you want: http://www.seicane.com/all-in-one-car-radio-gps-dvd-player-for-2001-2002-2003-2004-2005-chrysler-voyager-with-bluetooth-music-hd-1080p-video-aux-dvr-wifi-3g-backup-camera-c201.

If you want to find more kinds of stereos,you can visit http://www.seicane.com,where there should be a suitable one for you and I have another essay which  is about upgrade guide for Chrysler 300C audio.

 

Posted in Chrysler. Tagged with , , .