http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

Author Archives: jack

Detailed installation steps for 2006-2013 Ssangyong Actyon navigation GPS dvd support 1080P AV in/out

Most of you should be the owners of Ssangyong Actyon from 2006 to 2013 and have the desire to upgrade your car audio systems.Since some reasons you haven’t achieved

it maybe because you are too busy or you have no idea what to do with it.

 

If you are really busy and can’t spare time to do it,you can contact with the dealer who works for it and

let them to help you to install Ssangyong Actyon navigation system in your car.

 

In this process,there should be not only one radio that is suitable,so when someone is recommend you

one of it,you’d better look at more ones and make a comparison to choose a favor and better one.

 

And there are also a lot of people that want to do it himself,then you need to know detailed installation

steps for 2006-2013 Ssangyong Actyon navigation GPS dvd support 1080P AV in/out,you can take it as reference for your upgrade work.

 

Here is the picture for car head unit after installation,dvd gps navigation system of 2006-2013

Ssangyong Actyon.

Car head unit after installation,dvd gps navigation system of 2006-2013 Ssangyong Actyon

Car head unit after installation,dvd gps navigation system of 2006-2013 Ssangyong Actyon

 

This is a unit which is specially for Ssangyong cars,we know its general appearance from this picture.If you look very closely you can

find that this audio is a little different from other ones.You will see corresponding description about

it at latter section.And now we will get to know how to do this can self-done work.

 

2006-2010 Ssangyong Actyon original stereo removal and nav system installation:

Before you get to know it,I need to state that the following operations is not exactly for for Ssangyong

Actyon head unit removal and aftermarket sat nav installation,but usual solutions for removing a car stereo,which can benefit you

having a better understanding about installing new unit into your car.

 

1.Use a lever to pry downer small trim panel and remove it,then same to right side one

Use a lever to pry downer small trim panel and remove it

Use a lever to pry downer small trim panel and remove it

2.Make four removal tools inserted into four holes after surface panels are removed

Make four removal tools inserted into four holes after surface panels are removed

Make four removal tools inserted into four holes after surface panels are removed

3.Pull out factory stereo by pulling out these four tools

Pull out factory stereo by pulling out these four tools

Pull out factory stereo by pulling out these four tools

 

4.Disconnect cables behind the unit

Disconnect cables behind the unit

Disconnect cables behind the unit

5.Pry off higher small trim panels,then remove them,like step one

6.insert four removal tools into four higher holes

insert four removal tools into four higher holes

 

7.hold them and pull upper radio out

hold them and pull upper radio out

8.Make connectors behind it unconnected

Make connectors behind it unconnected

Make connectors behind it unconnected

If you think that you are not very familiar with that new unit,then you can seek for information

from web pages,for example:http://www.seicane.com/double-din-in-dash-gps-stereo-upgrade-

for-2006-2013-ssangyong-actyon-with-radio-tuner-dvd-bluetooth-mp3-3g-wifi-tv-aux-1080p-av-

in-out-steering-wheel-control-c158.

 

Now factory CD player is taken out and next job for you is to install new unit into it.Firstly,you

should read installation guide carefully which is within your bought radio.There is a wiring diagram on it and you should finish cables connection according to it step by step.

 

I advice you to check your connection again to ensure that all wires are plugged right.After correct

connection,you can turn on new radio first to check if your installation is right.If the machine can

works,then you can put things that are removed back to primary positions.

 

It’s usual for you if don’t do it exactly like this,after all it’s not right procedure.Actually the

difference is mainly on removal,and general removal operations including:prize trim panels

with a pry tool,remove screws which is used to firm car stereo and disconnect cables that

connected it.

 

Remember to be patient and careful to do this work,it’s not hard to achieve and wish you

good luck!

Posted in Ssangyong car DVD. Tagged with , , .

Car stereo upgrade for 2001- 2005 Chrysler Voyager with dvd GPS touch screen AUX

If your Chrysler Voyager of 2001-2005 have not upgraded your car stereo for some reasons,today I will help you to solve some of them,

including that if you want to finish it yourself,exactly I will show you specific steps for car stereo

upgrade for 2001- 2005 Chrysler Voyager with dvd GPS touch screen AUX and this is also my

object.

 

Next  is the head unit car stereo after upgrade,dvd player with gps nav system of 2001-2005

Chrysler Voyager.

Head unit car stereo after upgrade,dvd player with gps nav system of 2001 2002 2003 2004 2005 Chrysler Voyager

Head unit car stereo after upgrade,dvd player with gps nav system of 2001 2002 2003 2004 2005 Chrysler Voyager

 

Except for 2001-2005 Chrysler Voyager,the new unit also fits many other cars,including

1999-2004 Jeep Grand Cherokee, 2003-2005 Jeep Wrangler,2002-2007 Jeep Liberty ,

2001-2005 Chrysler Grand Voyager ,2002-2004 Chrysler 300M Concorde,2003-2005

Chrysler PT Cruiser,2002-2006 Chrysler Sebring Dodge RAM,2004-2007 Chrysler

Town & Country,2002-2004 Dodge Dakota,2004-2005 Dodge 1500  2500 3500 Pickup,

2004-2005 Dodge Neon Stratus Intrepid, 2002-2006 Dodge,2004-2007 Dodge Caravan,

2005-2006 Dodge Viper.

 

After watching this suitable stereo from a car shop,most of you may be eager to know how to

install Chrysler Voyager dvd radio.

 

Don’t worry,the first thing you should do is to choose a suitable unit for your car.If you want to

do it yourself,then you need to find a unit whose panel is the same to your factory one’s.Or you

can directly ask someone who works in the shop or on the Internet,they will find you a right one.

 

It’s not exactly right to think that installing a head unit of the car is a thing for special man.

However many people have succeed achieving it by themselves,it’s a real fact.How can they

do this? Actually it’s not a difficult thing when you have grasped right installation instruction.

 

Before I show you detailed procedure for its installation which may benefit you getting over

upgrade job,here are some notes but important for you.

 

Precautions before installation:

1.You’d better make enough preparations for this work and ask someone else beside to give

you a hand

2.Please ensure that you have done all car parking affairs to make sure your safety

3.Please remember to disconnect battery negative lead,or it may be dangerous during next

process

 

Before you begin to install new unit in your car,you can have a view at next video,it’s short

but will show you general things on using the dvd player:

2001-2005 Chrysler Voyager original radio removal:

1.Use a pay tool to lever edges of the trim panel

Use a pay tool to lever edges of the trim panel

Use a pay tool to lever edges of the trim panel

2.Remove trim panel after it is released

Remove trim panel after it is released

Remove trim panel after it is released

3.Use a screwdriver to remove 4 screws which has two on each side

Use a screwdriver to remove 4 screws which has two on each side

Use a screwdriver to remove 4 screws which has two on each side

4.Then you can take out CD player

take out CD player

take out CD player

5.You can find that there are cables behind it,so you need to make them disconnected.

Some of them may be very tough to remove,so you should be patient to remove them

make all cables behind the stereo disconnected

make all cables behind the stereo disconnected

6.This is the original stereo of the car,if you are careful enough,you will find that model of it is similar to the stereo which

is showed at the beginning of this article

original stereo of the car

original stereo of the car

2001-2005 Chrysler Voyager gps dvd installation:

Next connecting the antennas,cables and connectors correctly is the most important,you can

do the connection after carefully reading the upgrade guide that is within your bought stereo.

There should be detailed introduction on it,you need to act this connection as it shows step by step.

After that,install new radio in car and turn on it.If it works,then make all other parts back to car.

 

Wish you good luck!

 

And if you are not very sure about the functions of new unit,then you can have a patient look at next

website,it will show you what you want:http://www.seicane.com/all-in-one-car-radio-gps-dvd-play

er-for-2001-2002-2003-2004-2005-chrysler-voyager-with-bluetooth-music-hd-1080p-video-aux

-dvr-wifi-3g-backup-camera-c201.

 

 

Posted in Chrysler. Tagged with , .

How to install 2006-2010 OPEL Zafira bluetooth dvd with 3G WiFi CD changer 

Head unit after installation,bluetooth dvd player with gps nav system of 2006-2010 OPEL Zafira

Head unit after installation,bluetooth dvd player with gps nav system of 2006-2010 OPEL Zafira

This is the head unit after installation,bluetooth dvd player with gps nav system of 2006-2010 OPEL Zafira.

Facts shows that there are more and more people are upgrading their audio system of their cars.

Because more advanced and convenient stereos attract us with its nicer appearance and economic

functions equipped.And this above image is one of them which suits 2006-2010 OPEL Zafira.

 

You may be very busy and want to make your OPEL Zafira bluetooth dvd installation more professional,

you can go to corresponding shop and ask a technical worker to achieve it.

 

Or some of you may want to do it yourself if it’s possible.The answer is yes,you can install it yourself when

you have known clearly about how to install 2006-2010 OPEL Zafira bluetooth dvd with 3G WiFi CD

changer.Here is a video which shows you how to operate this new unit:

 

At the same time,though you are the owner of other cars,that will matter a lot,because many modern

stereos probably can be installed in several cars.Maybe this unit in the picture also fits your car.If it doesn’t,

you can also read this essay carefully for you can take it as reference.Because the principles of radio upgrade

are mostly same.Next comes to easy steps of audio replacement.

 

2006-2010 OPEL Zafira original radio removal and bluetooth dvd installation:

 

1.There are four small holes on the unit,insert two removal tools into the holes

insert two removal tools into the 4 holes

insert two removal tools into the 4 holes

2.Bend the tools a little and pull out the stereo at the same time

Bend the tools a little and pull out the stereo at the same time

Bend the tools a little and pull out the stereo at the same time

3.Disconnect cables behind the unit

Disconnect cables behind the unit

Disconnect cables behind the unit

4.Take out a screw and put wires in inner place

Take out a screw and put wires in inner place

Take out a screw and put wires in inner place

5.Use a pry tool to lever top of the trim panel,release and remove it

Use a pry tool to lever top of the trim panel

Use a pry tool to lever top of the trim panel

6.When you take out the panel,you will find a lot of cables are also taken out.Then you connect antennas

as the pictures show:

 

 

connect antennas 1

connect antennas 1

connect antennas 2

connect antennas 2

7.Pull out the side panel a little with a screwdriver,then make lower side panel off which is in front of file

Pull out the side panel a little with a screwdriver

Pull out the side panel a little with a screwdriver

 

make lower side panel off which is in front of file

make lower side panel off which is in front of file

8.Insert long red wire down through the side fasten panel,then up through removed panel in front of file,firm the side panel

Insert long red wire down through the side fasten panel,then up through removed panel in front of file,firm the side panel

Insert long red wire down through the side fasten panel,then up through removed panel in front of file,firm the side panel

9.Make wires connected as the picture show,tidy all of them into the space

Make wires connected

Make wires connected

10.Plug long red cable to right place

Plug long red cable to right place

Plug long red cable to right place

11.Make it connected to removed small panel in front of file and cover it

Make it connected to removed small panel in front of file and cover it

Make it connected to removed small panel in front of file and cover it

12.Connect adapters,cables between new unit and the car

Connect adapters,cables between new unit and the car

Connect adapters,cables between new unit and the car

 

Connect adapters,cables between new unit and the car2

Connect adapters,cables between new unit and the car2

 

13.Then connect that two outside wires to back of new unit,install new radio into it,and cover removed panel on the dvd player

So the whole procedure for car stereo installation is over and we can see that removal work is very simple

when we have right removal tools.However when we want to mount it,it become  a little complex when we

are making cables connection.You can learn it well by viewing some messages from the Internet,for example:

http://www.seicane.com/aftermarket-oem-gps-in-dash-car-dvd-for-opel-zafira-with-touch-screen-radio-

bluetooth-3-zone-advanced-pop-built-in-20-disk-virtual-cd-changer-3g-wifi-c019.

If you are not very sure,you can ask someone who are professional to help you,that may be quicker.

Some notes after installation:

1.Please don’t feel too excited after you succeed finishing the job,or it may cause some damage to car or even

yourself

2.Please don’t pay too much attention to new gps dvd especially when you are driving on a complex road

3.In order to ensure the head unit can be used longer,do not use any chemicals to wipe it or spill any liquid

on it

 

For more choices about radios for all kinds of cars,maybe you can find what you want from next website:

http://www.seicane.com/.And if you are interested in Opel Astra DVD GPS installation,I have also written

an article for it.

Posted in Opel car DVD. Tagged with , , .

How to install aftermarket Renault Duster navigation system with BT touch screen

This is a stereo which fits Renault Duster,it can be installed in your car if you are one owner of Renault Duster.

Car stereo after installation,aftermarket DVD GPS nav system with usb 3G WIFI of Renault Duster

Car stereo after installation,aftermarket DVD GPS nav system with usb 3G WIFI of Renault Duster

People are more likely to seek for convenient and entertaining things from busy life,I think this is one

of the reasons why upgrading car audios is becoming so popular,and many car owners are finding

out ways to upgrade their car stereos in order to do it himself.

About Renault Duster radio upgrade,the first thing you should do is to choose one head unit which is

suitable for your car.And it has be shown at the beginning of this essay.

Next,we should figure out how to install aftermarket Renault Duster navigation system with BT

touch screen,this is the main content I will tell you in the following part.

And here are some tips about installation before showing it.

Pre-installation cautions:

1.Before installation,check the battery voltage for this unit is used for the vehicle with 12V battery and

negative end.

2.Before connecting,make sure the ignition is off to avoid short circuit

3.Please make sure that all loose wires are isolated with electrical parts

4.Please don’t tangle the wire when tighten the moving parts(such as seat rails)

 

Renault Duster original stereo removal:     

1.Use your hand to gently pry trim panel and remove it,it’s easy to remove so don’t need a lever

Use your hand to gently pry trim panel and remove it

Use your hand to gently pry trim panel and remove it

2.Put the trim panel in front of its original space to make next steps more easily

Put the trim panel in front of its original space

Put the trim panel in front of its original space

3.Use a screwdriver to remove these four screws

Use a screwdriver to remove these four screws

Use a screwdriver to remove these four screws

4.Take the stereo out and remove it

take out the stereo

5.Disconnect antennas behind the stereo

disconnect cables connected them6.Then make out four screws as the picture point,this screw and upper one,and two on other side

remove four screws as the picture point,this one and upper one,and the other two on other side

Be careful not let the trim panel slide down,which may disturb you.

7. If it’s needed,you may need to make screws under the panel out

If it’s needed,you may need to make screws under the panel out

If it’s needed,you may need to make screws under the panel out

Renault Duster navigation system installation:

Now factory stereo has been removed and next we will continue installing Renault Duster navigation

 system into the car.

8.Remove original panel,connect cables of new unit to those wires connected car.Please make sure that

all your connection is right and you can take installation instructions within your new radio as reference

9.Sort wires well and put new unit into it,don’t eager to reinstall other things,you can turn on audio first.

If new unit can work out,then continue to make other removed things back to right places.Then all

operations for the installation has been introduced,you can get more details from next website:

http://www.seicane.com/oem-in-dash-radio-replacement-mp5-player-for-renault-duster-built

-in-gps-pop-dvd-bluetooth-support-anti-shock-2-channel-aux-3g-wifi-c157.

 

 

Posted in Uncategorized. Tagged with , , .

Detailed installation steps for 2010-2014 Chevrolet Orlando navigation system with Bluetooth DVD

Head unit after upgrade,navigation dvd with touch screen bluetooth function of 2010-2014 Chevrolet Orlando.

Head unit after upgrade,navigation dvd with touch screen bluetooth function of 2010-2014 Chevrolet Orlando

Head unit after upgrade,navigation dvd with touch screen bluetooth function of 2010-2014 Chevrolet Orlando

 

Before we learn about the detailed installation steps for 2010-2014 Chevrolet Orlando navigation system with bluetooth dvd,we can view this front picture first to grasp general idea about the appearance and some new functions of   new autoradio.

If you see it carefully,we can find that this car dvd dashboard has some difference with other ones:this stereo has two operations:one is touch screen which can be operated with a touch screen pen,the other one is push button controls,both ways can operated this unit.Though you are not owner of 2010-2014 Chevrolet Orlando,    there is no matter only if your radio dashboard is alike with above one.

So the next question turns to what steps will we follow about installing Chevrolet Orlando navigation dvd,and it isn’t work that need specialized technology but can be a normal work by ourselves,but under the condition that we have known clearly about its installation instructions.Next comes to main content of this essay.

2010-2014 Chevrolet Orlando original radio removal:

1.Use a removal tool,gently pry the upper vent housing panel from the dash

Use a removal tool,gently pry the upper vent housing panel from the dash

Use a removal tool,gently pry the upper vent housing panel from the dash

2.Lever the shifter surround panel,on manual transmission vehicles,unclip and reposition the shifter

Lever the shifter surround panel

Lever the shifter surround panel

3.Take out 2 screws from the storage pocket,remove storage

Take out 2 screws from the storage pocket,remove storage

Take out 2 screws from the storage pocket,remove storage

4.Take out 4 screws from the accessorv control panel

Take out 4 screws from the accessorv control panel

Take out 4 screws from the accessorv control panel

Take out 4 screws from the accessorv control panel

Take out 4 screws from the accessorv control panel

5.pull out on panel,this panel was very tough to remove,be patient and the clips will release let panel hang to side

pull out on panel

6.Take out 2 screws from the radio control panel, disconnect the radio control panel

Take out 2 screws from the radio control panel, disconnect the radio control panel

Take out 2 screws from the radio control panel, disconnect the radio control panel

7.This is a really strange blue connector you must make out the blue clip completely before removing the real connector,and remove the other clip

make out the blue clip completely before removing the real connector,and remove the other clip

make out the blue clip completely before removing the real connector,and remove the other clip

8.Take out 2 screws from the radio chassis,and 2 screws near the top of the stereo to release the screen

Take out 2 screws from the radio chassis

Take out 2 screws from the radio chassis

 

Take out 2 screws near the top of the stereo to release the screen

Take out 2 screws near the top of the stereo to release the screen

 

9.Take out screen by pulling out,remove behind clip

Take out screen by pulling out

Take out screen by pulling out

10.Take out 2 more screws on stereo

Take out 2 more screws on stereo

Take out 2 more screws on stereo

11.Take out stereo and connectors

Take out stereo and connectors

Take out stereo and connectors

Before we install new unit into car,we can have a look at next video first:

2010-2014 Chevrolet Orlando navigation dvd installation:

factory audio is removed now,the next job is to install GPS radio navigation system,and you need to be more careful in next process.

Next what you need to do is to make cables connection between new unit and car.About this,I advise you to read instructions carefully which is within your bought radio and you can find answers from it.This is a key part of it,so you should be very careful when you are connecting cables and antennas.

After you have connected all cables,tidy them in order to save more spaced for new stereo for the space for them is very limited.After that,install your new radio gps into the car.

Turn on new unit and check whether it can work well.If it’s ok,it means that your work is right.Then you can firm those removed screws to their original places and reinstall storage,shifter,upper vents and housing panel back to right positions.Thus the whole procedure is finished and you will enjoy a good time during your driving.

If you still have some questions about this dvd radio with nav system,they may be sloved by visiting the following website:http://www.seicane.com/in-dash-navigation-multimedia-player-for-2010-2014-chevrolet-orlando-with-pop-gps-3g-wifi-support-e-book-bluetooth-dvd-radio-20-disk-virtual-cd-changer-c155 .

Attention:

Please keep everything which are removed especially the screws for they are small but useful well,they will be used once again in your installation to fix the machine.If you can’t find a necessary thing,

that would be very distraught.

 

Posted in Chevrolet car DVD. Tagged with , , .

How to upgrade 2010 2011 2012 Peugeot 408 car stereo head unit support digital tv rearview camera

This is a picture for car head unit after installation,GPS radio with bluetooth tv IPod of 2010 2011 2012 Peugeot 408.Then you can judge that whether it’s suitable for your car.

car head unit after installation,GPS radio with bluetooth tv IPod of 2010 2011 2012 Peugeot 408

car head unit after installation,GPS radio with bluetooth tv IPod of 2010 2011 2012 Peugeot 408

After you’re sure that this one fits your car,next we need to solve the problem of how to upgrade 2010 2011 2012 Peugeot 408 car stereo head unit support digital tv rearview camera.You may know the fact that Peugeot 408 aftermarket stereo installation is roughly identical from other cars’.

Firstly,you should make it clear that the audio you bought can be installed in your car.Next,we should search enough information about the installation.

What actions can you do about Peugeot 408 stereo installation?

You can do things like these,such as searching the Internet,for example,you can get more specific information from next website:http://www.seicane.com/multimedia-dvd-gps-auto-a-v-system-for-2010-2011-2012-peugeot-408-with-lcd-touch-screen-bluetooth-music-am-fm-radio-tv-tuner-wifi-3g-aux-steering-wheel-control-c083.And you can ask a professional person to check your original car series to see if everything is right.

Next are the general steps for it,you can read them carefully and prepare some tools include pry tool and screwdriver and then start your work.

2010 2011 2012 Peugeot 408 factory stereo removal:

1.Open the lower panel which is under the player and remove it

Open the lower panel which is under the player and remove it

Open the lower panel which is under the player and remove it

2.remove 4 screws on with a screwdriver,2 on each side

remove 4 screws on with a screwdriver,2 on each side

remove 4 screws on with a screwdriver,2 on each side

3.Then remove dashboard of original CD radio

remove dashboard of original CD radio

remove dashboard of original CD radio

4.Take out this screw and the corresponding lower one and the other two on the other side(total of 4)

Take out this screw and the corresponding lower one and the other two on the other side

Take out this screw and the corresponding lower one and the other two on the other side

5.Remove the CD player and disconnect cable behind it

Remove the CD player and disconnect cable behind it

Remove the CD player and disconnect cable behind it

6.Fasten and remove middle-place panel set

Fasten and remove middle-place panel set

Fasten and remove middle-place panel set

7.Insert two removal tools as the picture show into higher panel,unclip and the same on the other side and then pull it out

Insert two removal tools,the same to the other side

Insert two removal tools,the same to the other side

2010 2011 2012 Peugeot 408 aftermarket stereo installation:

8.Have a patient look all cables and antennas,connect them one by one as the instructions show,which is very important in your installation

9.After all cables are pluged correctly,firm 4 screws to original place and install your dvd player into it

10.Firm 4 screws back to the player and install removed panels back to your car

11.With everything set well,turn on your radio and check all functions and equipment of car’s

Precautions about the unit installation:

1.Before you remove the unit,please have a check for radio appearance and its functions

2.It will arouse problem if you extend or shorten GPS antenna

3.Be careful not to make the GPS antenna winding the steering wheel and shift lever to avoid danger

For more car stereos,you can visit http://www.seicane.com/,there are a lot of car stereos there.Maybe you can get the most suitable one there.

Posted in Peugeot car DVD. Tagged with , , .

2003-2010 VW Touareg DVD navigation system installation

Car head unit after installation,DVD GPS navigation system of 2003-2010 VW Touareg.

Car head unit after installation,DVD GPS navigation system of 2003-2010 VW Touareg

Car head unit after installation,DVD GPS navigation system of 2003-2010 VW Touareg

Many facts shows that people are seeking for more pleasure and entertainments from busy life,for we need to free ourselves especially when we are living rapid-speed life.Many people are more willing to buy a new car because it will bring them much   convenience and entertainments.If you are one owner of 2003-2010 VW Touareg,this article will show general steps which is about 2003-2010 VW Touareg DVD navigation system installation.

Before we talk about how to remove original CD player and install new one,we can have a look at above image first and make a comparison between your car stereo with it,and judge if the dashboards of them are same.If they are in same scale.it shows that this stereo radio can also be installed in your car.

Most of you may have no idea about how to use this stereo,here is a video for you which will show you detailed operations:

 

Actually this process is not difficult or complex,but easy doesn’t mean that we have no need to attention anything,please turn off all affairs of your car to ensure security.And you need to note whether dvd player enters heat protection mode when your car has operated at very fast speed for a long time or when you feel the temperature of the unit is very high.

If you have decided to install VW Touareg navigation radio for your beloved car,you can have a good look at the following VW Touareg radio installation guide and operate it step by step.

1.Factory dashboard of 2003-2010 VW Touareg

Factory dashboard of 2003-2010 VW Touareg

Factory dashboard of 2003-2010 VW Touareg

2.Make four small levers inserted in the gap of radio

Make four small levers inserted in the gap of radio

Make four small levers inserted in the gap of radio

3.Make them tight into the gap and then remove CD player by pulling off the levers

Make them tight into the gap and then remove CD player by pulling off the levers

Make them tight into the gap and then remove CD player by pulling off the levers

 

4.Use a pry tool like the picture show to fasten lever and then you can remove four levers

Use this tool to fasten lever

Use this tool to fasten lever

Use a pry tool like the picture show to fasten lever

Use a pry tool like the picture show to fasten lever

5.Unplug this big cable

Unplug this big cable

Unplug this big cable

6.Loosen this screw with a small special screwdriver and make most fine wire connected to it

Loosen this screw with a small special screwdriver

Loosen this screw with a small special screwdriver

make most fine wire connected to it

make most fine wire connected to it

7.After that get out inner wire and take out a blue one and then plug it into white one of new unit,with insert the other white one into blue one’s original place

get out inner wire and take out a blue one and then plug it into white one of new unit

get out inner wire and take out a blue one and then plug it into white one of new unit

insert the other white one into blue one’s original place

insert the other white one into blue one’s original place

8.Plug it to right place,sort wire in and turn on new radio and check whether all functions can work well

Plug it to right place

Plug it to right place

 

sort wire in and turn on new radio

sort wire in and turn on new radio

 

Installation steps for VW Touareg GPS bluetooth dvd player with sat nav system is over here.Before you begin the work,you should be careful when you are making cables connection and make sure all antennas must be connected to right positions.

Next, slide the stereo into dashboarda and then plug the negative cable to the original wiring harness as the steps show. Turn on new unit and check whether all functions in the unit can work well.If it doesn’t,check the wiring connections again or contact with the technicians from the dealer for help,or you can visit some websites which can help you know better about new stereo, for example: http://www.seicane.com/all-in-one-gps-radio-stereo-replacement-for-2003-2010-vw-volkswagen-touareg-with-3d-navigation-hd-touch-screen-cd-dvd-player-bluetooth-dvb-t-tv-steering-wheel-control-aux-ipod-iphone-c042 .

 

Posted in VW car DVD. Tagged with , , .

How to upgrade 2010 KIA Ceed radio stereo with aftermarket navigation system

If you are someone who wants to upgrade car stereos for your Kia Ceed,it means that you may need help from some professional technicians about installation,if you have no experience about it please do not disassemble the unit privately to avoid damage and accident.And today I want to show you detailed instructions about how to upgrade 2010 KIA Ceed radio stereo with aftermarket navigation system.

Before your installation,you can turn on car equipments to have a check for all functions of the CD player and button operation system to see whether they are normal;whether inner and outside part of your car have squandering phenomenon.Then the installer can reflect to customers what problems car has itself.

Aftermarket car radio DVD player nowadays will bring you much convenience and make your driving life more interesting,let’s have a look at what kind of head unit it is:car stereo after upgrade,dvd radio gps with sat nav system of 2010 KIA Ceed.For better understanding of it,you can visit the corresponding website,for example:http://www.seicane.com/double-din-2010-kia-ceed-hd-touch-screen-gps-navigation-system-auto-av-in-out-am-fm-radio-bluetooth-dvd-player-mp3-3g-wifi-tv-ipod-iphone-aux-pop-backup-camera-c086.

car stereo after upgrade,dvd radio gps with sat nav system of 2010 KIA Ceed

car stereo after upgrade,dvd radio gps with sat nav system of 2010 KIA Ceed

2010 KIA Ceed original stereo removal and aftermarket radio installation:

1.Pry the below part of trim panel with a lever, you may need a tool  like this,and the same operation for the other side

Pry the below part of trim panel with a lever

Pry the below part of trim panel with a lever

 

a tool  like this may be needed

a tool like this may be needed

 

same operation for the other side

same operation for the other side

2.Then you will pry overhead part off the dashboard

pry overhead part off the dashboard

pry overhead part off the dashboard

3.With four sides all released,you can move dashboard easily (be careful it can just move,not remove)

 

 

move dashboard easily

move dashboard easily

4.Before you can remove it,you should disconnect all cables behind it

disconnect all cables behind it

disconnect all cables behind it

5.Then you only can totally remove the dashboard

totally remove the dashboard

totally remove the dashboard

6.Make out four screws with a screwdriver

Make out this screw and the responding one

Make out this screw and the responding one

Make out this higher screw and the responding one

Make out this higher screw and the responding one

7.Gently remove the original car radio and disconnect all cables behind it

remove the original car radio

remove the original car radio

disconnect all cables behind it

disconnect all cables behind it

8.You can have a small rest for you have finished one important part of it.After removal,install the new player with cables connected correctly in the car

9.Firm four removed screws that are put aside,then make trim panel back on your new unit

Arrangement for wiring must be reasonable during your installation process.Usually,the space for installation is limited.You’d better reduce unnecessary wirings’ space to make the dvd gps easier to install and function.The cables and wires of car and new radio must be routed properly to avoid touching any moving parts,include steering wheel column acceleration pedal and brake pedal.All antennas must be bonded properly to against any loose during driving.

All operations for KIA Ceed radio dvd installtion has been showed,if you would like to try it by yourself,you can do it when you are sure that it is safe and you have grasped above 9 steps well.

When you are driving your Kia Ceed with a new radio,you will find that some convenient functions will be up to you,driving can be an interesting thing especially when you are on a trip with your family or friends.What an enviable thing, isn’t it?

But wherever you go, remember safety must be the most pivotal,so do not stare at the video or forget something because you are lost in beautiful music,that can be dangerous.

I have also written another essay which is about KIA Sportage aftermarket gps installation,if you or you know someone who are also going to install a new head unit for his Kia Sorento,then you can go to and have a look at it.Actually you will find the principles of operations are almost same in a lot of places.

And if you are finding another kind of stereo or something in this aspect,you can go to   and have a search there,wish you good luck.

Posted in Kia car DVD. Tagged with , , .

Specific installation instructions for 2012 2013 Toyota Yaris navigation dvd with BT music 3G WIFI

Here is car stereo autoradio after installation,navigation dvd sound system with bluetooth music of 2012 2013 Toyota Yaris.This is one of the stereos which can be installed in Toyota Yaris of 2012 2013.

car stereo autoradio after installation,navigation dvd sound system with bluetooth music of 2012 2013 Toyota Yaris

car stereo autoradio after installation,navigation dvd sound system with bluetooth music of 2012 2013 Toyota Yaris

From this picture we can find that the appearance and functions which are showed on touch screen have all been changed,and it seems to be very wonderful to drive a car with a this kind of stereo.

You may take the stereo upgrade into account if your sound system of 2012 2013 Toyota Yaris is still the factory one which is operated by control buttons.It won’t be complex to achieve it or even need to buy another car with advanced stereo,if you want to do it yourself,then knowing specific installation instructions for 2012 2013 Toyota Yaris navigation dvd with BT music 3G WIFI is very necessary.

Don’t worry,it’s not hard to achieve this goal.First of all,choose one suitable stereo for your car and then patiently and carefully read the following installation guide.

2012 2013 Toyota Yaris cd radio removal and navigation dvd installation:

You can prepare some tools which can be useful before installation,such as a lever or other pry tool and screwdriver,and you’d better ask someone beside you that can make your work more smoothly.

1.Pry off the trim of radio

Pry off the trim of radio

Pry off the trim of radio

2.Take four mounting screws out

Take four mounting screws out

Take four mounting screws out

3.Gently remove the original radio

Gently remove the original radio

Gently remove the original radio

4.Get out these four screws

Get out these four screws

Get out these four screws

5.Take out your hot new unit

Take out your hot new unit

Take out your hot new unit

6.Check out QA

Check out QA

Check out QA

7.Make out the transport screws

Make out the transport screws

Make out the transport screws

8.Make your accessories inserted in

Make your accessories inserted in

Make your accessories inserted in

9.Remove panels to install reversing cam

Remove panels to install reversing cam

Remove panels to install reversing cam

10.Have a check for that camera prior to drilling

Have a check for that camera prior to drilling

Have a check for that camera prior to drilling

11.Fix the screws which was taken out from the original radio

Fix the screws which was taken out from the original radio

Fix the screws which was taken out from the original radio

12.Make other parts of head unit back to their original place

Make other parts of head unit back to their original place

Make other parts of head unit back to their original place

With so detailed steps for Toyota Yaris navigation dvd installation,I believe that you should have known the main jobs about upgrade affairs.One thing will become not that difficult when you have made up your mind to finish it,because confidence and perseverance we have can help us do it better.

But it’s normal that we will still account some situations which stops us going on,then you need to think about which step is wrong and try to correct it then continue.Or you can also visit next website to see whether your problem will be solved: http://www.seicane.com/2012-2013-toyota-yaris-gps-radio-sound-system-hd-touch-screen-cd-dvd-player-tv-tuner-bluetooth-aux-dvr-1080p-backup-camera-3g-wifi-ipod-iphone-steering-wheel-control-c146.

There are a lot of information that can be applied for you in above website,hope you can enjoy entertaining time during driving soon and have a wonderful journey with your family or friends.

Precautions after installation:

1.Please pay more attention to your new head unit when you are driving on a rainy day,for the moisture may gather on it and cause damage to it

2.Please do not stare  at the video or something else of the GPS radio when you are driving,it’s dangerous

3.If you need to clean it up,please use a piece of dry cloth to do it,without using any other chemical cleaning objects

 

Posted in Toyota car DVD. Tagged with , , .

How to remove 2013 Toyota RAV4 original radio stereo and install GPS bluetooth dvd

Before we know the specific upgrade steps,I’d like to show you an image:head unit after installation,radio GPS dvd bluetooth with sat nav system of 2013 Toyota RAV4.

head unit after installation,radio GPS dvd bluetooth with sat nav system of 2013 Toyota RAV4

head unit after installation,radio GPS dvd bluetooth with sat nav system of 2013 Toyota RAV4

This new unit is one special stereo that suits 2013 Toyota RAV4,you can have a look at its trim panel and compare it with your original one’s.They are same,this is why it fits your car.

Nowadays more and more things are upgrading at very rapid speed with faster and faster development of technology.This is where the market just is,that human begins need more advanced products,they need so they seek for this kind of life style.

So how to remove 2013 Toyota RAV4 original radio stereo and install GPS bluetooth dvd?About this question,I will show you detailed installation steps for it in the following part.

Most of you are thinking about the upgrading things but don’t know what to do with the car radio.Don’t worry,you’ll see specific installation steps for Toyota RAV4 radio in latter part.But please note to remove the negative power cable from the battery before you begin your installation as the next picture shows.

2013 Toyota RAV4 original radio removal and aftermarket radio installation:

1.Make out the upper dashboard trim panel with an automotive tool,set the panel aside once removed

Make out the upper dashboard trim panel with an automotive tool

Make out the upper dashboard trim panel with an automotive tool

2.Pry the air conditioning vents on the left and right-hand sides of the factory touch careen unit gently away from the dashboard

Pry the air conditioning vents on the left and right-hand sides of the factory touch careen unit gently away from the dashboard

Pry the air conditioning vents on the left and right-hand sides of the factory touch careen unit gently away from the dashboard

3.Gently lever the clock display and hazard lamp panel away from the dashboard and set it to the side

Gently lever the clock display and hazard lamp panel away from the dashboard and set it to the side

Gently lever the clock display and hazard lamp panel away from the dashboard and set it to the side

4.Get out the four retaining screws attaching the factory touch screen unit to the dashboard

Get out the four retaining screws attaching the factory touch screen unit to the dashboard

Get out the four retaining screws attaching the factory touch screen unit to the dashboard

5.Gently remove the touch screen unit away from the dashboard and lean it forward to gain access to the wiring harnesses on the reverse side

Gently remove the touch screen unit away from the dashboard and lean it forward to gain access to the wiring harnesses on the reverse side

Gently remove the touch screen unit away from the dashboard and lean it forward to gain access to the wiring harnesses on the reverse side

6.Make the touch screen disconnected by unplugging the individual harnesses

Make the touch screen disconnected by unplugging the individual harnesses

Make the touch screen disconnected by unplugging the individual harnesses

7.Absolutely removed dashboard

Absolutely removed dashboard

Absolutely removed dashboard

Original Toyota RAV4 radio removal has finished until here,in fact removal is the main part of upgrading car radio.

If you have a clear idea about removal affairs,the next installation process will not be a hard thing to you.

And it can be divided into three parts:make connections with all cables,install new machine and install other parts back to their primary places.

When you feel a little difficult to do the connection or other things,you can scan some helpful websites which will give you correct guide,for example: http://www.seicane.com/all-in-one-touch-screen-radio-stereo-for-2013-toyota-rav4-with-3g-wifi-dvd-player-bluetooth-music-tv-tuner-ipod-aux-steering-wheel-control-c247 ,or you can ask someone who knows better about this aspect.

We should know that making sure your security is actually the most important no matter how entertaining that reaching this upgrade goal is.So please having a better understanding about the upgrade as much as possible and making adequate preparations as you can before any work.

Precautions after installation:

1.Please try to make the radio away from heat sources,such as heating,heat or have other things,or it may cause damage to the machine

2.Please do not expose this machine to rain or moisture in the environment(as when rain or car washing) to avoid the internal machinery of the short circuit,which may cause some danger

3.You have to shut down power cables and then wipe panel before you clean the head unit.No using volatile chemicals to clean trim panel

 

Posted in Toyota car DVD. Tagged with , , .