Author Archives: eric

Quick Remove and Upgrade Tutorial for a 2011 2012 2013 2014-2016 Honda CITY Audio Aux GPS Sat Nav Car Radio Stereo

As far as I am concerned, an ideal car radio should not only come with practical features to bring convenience for a car owner but also meet the car owner’s entertainment needs to offer him a pleasant driving experience. If you think your old radio is not ideal enough, it is wise of you to quit it and install a new multifunctional one. This article mainly introduces some steps to upgrade a 2011 2012 2013 2014-2016 Honda CITY car radio. If you are interested in it, you can read it carefully.

2011 2012 2013 2014-2016 Honda CITY car radio after installation

2011 2012 2013 2014-2016 Honda CITY car radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. Please prepare a lever and a screwdriver before the removal and the installation.

5. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

 

2011 2012 2013 2014-2016 Honda CITY car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Remove screw below the radio and then pry the panel with a plastic removal tool.

Remove screw below the radio and then pry the panel with a plastic removal tool

Remove screw below the radio and then pry the panel with a plastic removal tool

3. Remove the storage pocket and then unscrew two hidden screws with a screwdriver.

Remove the storage pocket and then unscrew two hidden screws with a screwdriver

Remove the storage pocket and then unscrew two hidden screws with a screwdriver

4. Pry the panel with a plastic removal tooland then remove it.

Pry the panel with a plastic removal tooland then remove it

Pry the panel with a plastic removal tool and then remove it

5. Take out the original radio and disconnect the connectors at the back of the radio.

6. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

7. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

8. Connect the Seicane car stereo to your original stereo’s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place. All the installation is done.

 

If you comes across any problems, please don’t hesitate to consult your dealer, communicate with someone experienced or turn to a professional for help. Or if you are afraid of making damage to either your car radio or your car, you can directly arrange a professional technician to help you install the new car radio. As for the selection of an ideal car radio, if you have no ideas, here I would like to share a remarkable 2011 2012 2013 2014-2016 Honda CITY car radio from Seicane with you. For more details, please click:

https://www.seicane.com/2011-2012-2016-honda-city-hd-touchscreen-android-radio-car-stereo-with-gps-navigation-bluetooth-usb-wifi-obd2-1080p-rearview-camera-mirror-link-s0409

This car radio comes with a wide range of practical and entertainment features, mainly including 3D GPS navigation system, FM/AM radio, Bluetooth hands-free phone calls, Bluetooth streaming music, SD card or USB connection, file management, etc.

Under the wireless Bluetooth technology, you can connect your Bluetooth-enabled mobile phone to this car radio so as to get access to both Bluetooth hands-free phone calls and Bluetooth streaming music without taking your hands off the steering wheel. Besides, thanks to this unit’s built-in high-end 3D GPS navigation system, you are able to easily know your current locations and find the right way to reach any locations you would like to go to under the guidance of the turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Wish you like this remarkable car radio and good luck to you!

Posted in Uncategorized. Tagged with .

How to Upgrade and Install a 1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 Bluetooth GPS Navigation WIFI Radio Car Stereo

If you find that your factory radio is not up-to-date enough for you to get access to some modern and brand new features, it is suggested that you can remove your factory radio and install a new aftermarket car radio for your car. If you get an ideal car radio installed in your car, you can embrace a brand new driving experience. The following is a 1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio installation instruction from Seicane. You can refer to it if you own the same or similar dashboard.

1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio after installation

1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

 

2. Use a plastic trim tool to remove trim strip.

Use a plastic trim tool to remove trim strip

Use a plastic trim tool to remove trim strip

 

3. Remove screws marked by red arrows.

Remove screws marked by red arrows

Remove screws marked by red arrows

 

4. Take original radio out of the car.

Take original radio out of the car

Take original radio out of the car

 

5. Pull out original power plug of the car.

Pull out original power plug of the car

Pull out original power plug of the car

 

6. Connect the power cables as the picture shows.

Connect the power cables as the picture shows

Connect the power cables as the picture shows

 

7. Remove screws in the spare tire in the trunk.

Remove screws in the spare tire in the trunk

Remove screws in the spare tire in the trunk

 

8. Take out the spare tire.

Take out the spare tire

Take out the spare tire

 

9. Remove four screws marked with red arrows.

Remove four screws marked with red arrows

Remove four screws marked with red arrows

 

10. Remove screws in triangle crutch.

Remove screws in triangle crutch

Remove screws in triangle crutch

 

11. Take out triangle crutch.

Take out triangle crutch

Take out triangle crutch

 

12. Connect original plug of the car with power plug of DVD GPS.

Connect original plug of the car with power plug of DVD GPS

Connect original plug of the car with power plug of DVD GPS

 

13. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

 

14. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

 

15. Connect the Seicane car radio to your original car radio s plugs.

16. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

17. Put the new Seicane car radio into the dash and install the four screws.

18. Install the trim panel into its original place.

 

Now do you have a general understanding of the above removal and installation process? If you still have any doubts, please feel free to consult your dealer, communicate with someone experienced or turn to a professional for help. Or if you are afraid of making damage to either your car radio or your car, you can directly arrange a professional technician to help you install the new car radio. Anyway, it is essential to select an ideal car radio for your beloved car, if you have no ideas, you can check out the following link which is an amazing 1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/in-dash-1996-2003-bmw-5-series-e39-520i-523i-525i-m5-android-gps-navigation-system-with-touch-screen-3g-wifi-tpms-usb-dvr-obdii-rear-camera-aux-16g-flash-steering-wheel-control-s089993

 

 

This amazing car radio is running on the the stable Android 8.0 operation system and a strong eight-core CPU processor as well as 4GB RAM and 32GB ROM, which enables you to have a much smoother, faster and easier operation experience than before.

Even you don’t have a good sense of directions, you can make full use of this unit’s built-in GPS module to locate where you are currently and find the right way to get to your desired destinations. And this unit’s dual zone function enables you to listen to your favorite music while navigating, and the music will automatically switch to GPS voice.

What’s more, under the wireless Bluetooth technology, you can make your Bluetooth-enabled mobile phone pair with this car radio, so you can freely get access to both Bluetooth hands-free phone calls and Bluetooth streaming music for convenience and enjoyment.

If you like this unit, just add it to your shopping cart. Good luck to you!

Posted in Uncategorized. Tagged with .

How to Upgrade a 2003 2004 2005 2006-2007 Honda Accord 7 Car Radio Audio with Bluetooth Music Stereo Competently

What would you if you want to improve your in-car environment and take your driving experience up a notch? If I were you, I will remove the factory radio and install a new aftermarket car radio, which comes with both practical and entertainment features. If you also plan to replace your factory radio, you can refer to a correct installation guide to help you. This article mainly aims to introduce a 2003 2004 2005 2006-2007 Honda Accord 7 car radio installation guide from Seicane. If you own the same or similar dashboard, you can refer to this guide carefully.

2003 2004 2005 2006-2007 Honda Accord 7 car radio after installation

2003 2004 2005 2006-2007 Honda Accord 7 car radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriverbefore the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2003 2004 2005 2006-2007 Honda Accord 7 car radio installation guide

1. Use a plastic removal tool to pry the panel on the top of the car radio.

Use a plastic removal tool to pry the panel on the top of the car radio

Use a plastic removal tool to pry the panel on the top of the car radio

2. Pull up the panel and put it aside.

Pull up the panel and put it aside

Pull up the panel and put it aside

3. Use the plastic removal tool to remove the trim part around the gear shifter, and then unplug theconnectors or wires at theback.

Use the plastic removal tool to remove the trim part around the gear shifter, and then unplug theconnectors or wires at theback

Use the plastic removal tool to remove the trim part around the gear shifter, and then unplug theconnectors or wires at theback

3-1

3-1

4. Get the gear shifter removed to thelower position and then remove the small plastic part whichis shown below. Then use a screw driver to unscrew all screws that fix the whole plastic part and then remove it.

Get the gear shifter removed to thelower position and then remove the small plastic part whichis shown below. Then use a screw driver to unscrew all screws that fix the whole plastic part and then remove it

Get the gear shifter removed to thelower position and then remove the small plastic part whichis shown below. Then use a screw driver to unscrew all screws that fix the whole plastic part and then remove it

4-1

4-1

4-2

4-2

5. Remove screws that fix the compartment on the bottom of the original car radio and then remove the compartment.

Remove screws that fix the compartment on the bottom of the original car radio and then remove the compartment

Remove screws that fix the compartment on the bottom of the original car radio and then remove the compartment

5-1

5-1

6. Remove all screws that fix the original car radio.

Remove all screws that fix the original car radio

Remove all screws that fix the original car radio

7. Gently take out the original car radio and unplug the connectors and cables at the back of the radio.

Gently take out the original car radio and unplug the connectors and cables at the back of the radio

Gently take out the original car radio and unplug the connectors and cables at the back of the radio

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original stereo’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place. All the installation is done.

 

Now do you have a understanding of 2003 2004 2005 2006-2007 Honda Accord 7 car radio installation? If you have any doubts, you can contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to install a new car radio, you can straightly go to a car radio upgrade center and ask a professional technician to help you install the new car radio. While for the selection of an ideal car radio, you can refer to the following link which is a 2003 2004 2005 2006-2007 Honda Accord 7 car radio from Seicane. For more details, please click:

https://www.seicane.com/android-2003-2007-honda-accord-7-car-stereo-gps-navigation-head-unit-with-1080p-video-bluetooth-music-autoradio-steering-wheel-control-rearview-camera-dvr-4g-wifi-s301188


With this car radio installed in your car, you can freely get access to a wide range of practical and entertainment features, mainly including 3D GPS navigation system of high precision, FM/AM radio tuner, Bluetooth hands-free phone calls, Bluetooth streaming music, file management, SD card or USB connection, etc.

With the assistance of the worldwide real-time GPS navigation system, you can easily locate where you are currently and find the right way to get to any locations you would like to go to according to the turn-by-turn directions and voice prompts. And thanks to this unit’s dual zone function, you can also listen to your favorite music while navigating.

Additionally, this unit comes with built-in Bluetooth module, which enables you to dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your phone music playlists for both convenience and enjoyment.

If you are interested with this car radio, just install it and enjoy your driving accompanied by it. Good luck!

Posted in Uncategorized. Tagged with .

A Detailed Instruction on a 2011-2015 KIA K2 GPS Bluetooth DVD Car Radio Upgrade

At present, there is a trend that more and more car owners would like to replace their factory radio with a new aftermarket car radio. If you have a 2011-2015 KIA K2 and would like to upgrade your factory radio’s capabilities, then you can find a correct installation guide to help with the installation of your new car radio. This article mainly aims to introduce a detailed 2011-2015 KIA K2 car radio installation instruction from Seicane to you. If you have the same or similar dashboard, the following installation guide from Seicane will be helpful for you.

2011-2015 KIA K2 GPS Bluetooth DVD Car Radio after installation

2011-2015 KIA K2 GPS Bluetooth DVD Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details:http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2011-2015 KIA K2 car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Use a plastic removal tool to release the top panel.

Use a plastic removal tool to release the top panel

Use a plastic removal tool to release the top panel

3. Pry the trim panel of the radio with a plastic knife and remove it.Unplug the connector at the back of it.

Pry the trim panel of the radio with a plastic knife and remove it.Unplug the connector at the back of it

Pry the trim panel of the radio with a plastic knife and remove it.Unplug the connector at the back of it

3-1

3-1

4. Unscrew the screws that are holding the radio on the dashboard.

Unscrew the screws that are holding the radio on the dashboard

Unscrew the screws that are holding the radio on the dashboard

5. Take out the radio gently.

Take out the radio gently

Take out the radio gently

6. Unplug the connectors and cables at the back of the radio.

Unplug the connectors and cables at the back of the radio

Unplug the connectors and cables at the back of the radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original radio’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Now do you have a general understanding of the above installation instruction? If you have any doubts, you may browse some professional websites. Besides, you can also consult your dealer, communicate with someone experienced or seek help from a professional. If you still think it hard for you to install the new car radio by yourself, you can directly arrange a professional technician to help you install the new car radio.

While for the selection of an ideal car radio, if you have no ideas, you can refer to the following link which is a remarkable 2011-2015 KIA K2 car radio from Seicane. For more details, please click:

https://www.seicane.com/android-2011-2012-kia-k2-radio-dvd-player-gps-navigation-system-hd-1024-600-touch-screen-bluetooth-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-ipod-steering-wheel-control-usb-sd-mirror-link-s168044

This car radio is running on the stable Android 6.1 operation system and a strong quad-core CPU processor, so it can provide its users with higher capabilities and better performance.

When you are driving around an unfamiliar place, even you are not good at identifying directions, you can take great advantage of its high-accuracy 3D GPS navigation system so as to locate where you are currently and navigate to any locations you would like to go to. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Additionally, under the wireless Bluetooth technology, this unit enables you to pair your Bluetooth-enabled mobile phone with this car radio, therefore, you can freely dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from  your phone music playlists.

Wish you like this unit and good luck to you!

Posted in Uncategorized. Tagged with .

The Quick tutorial to Upgrade a 2012 CITROEN C4 GPS Navigation Bluetooth Touch Screen Car Radio

To improve your car’s capabilities and performance, you may consider replacing your factory radio with a new multifunctional car radio which can bring you a lot of great convenience and enjoyment in your car. This article aims to introduce a 2012 CITROEN C4 car radio installation guide from Seicane to you. If you own the same or similar dashboard, you can refer to this guide carefully to help with the installation.

2012 CITROEN C4 Bluetooth DVD GPS Car Radio after installation

2012 CITROEN C4 Bluetooth DVD GPS Car Radio after installation

Here are some tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and www.seicane.com make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

 

2012 CITROEN C4 car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Use a plastic knife to pry the trim panel and remove it.

Use a plastic knife to pry the trim panel and remove it

Use a plastic knife to pry the trim panel and remove it

2-1

2-1

2-2

2-2

3. Remove screws that are holding the radio.

Remove screws that are holding the radio

Remove screws that are holding the radio

4. Take out the original car radio.

Take out the original car radio

Take out the original car radio

5. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio

Disconnect the connectors and cables at the back of the radio

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Above is the whole removal and installation process for a 2012 CITROEN C4 car radio. If you encounter any problems and don’t know how to deal with, you can seek help from your dealer, someone experienced or a professional. And you can also directly go to a car radio upgrade center to arrange a professional technician to help you install the new car radio. Anyway, before installation, please do carefully select an ideal car radio. If you have no ideas, you can check out the following link which is an amazing 2012 CITROEN C4 car radio from Seicane. Here comes the link, please click:

https://www.seicane.com/2012-citroen-c4-dvd-player-radio-android-navigation-system-mirror-link-gps-hd-touch-screen-obd2-dvr-tv-1080p-video-3g-wifi-steering-wheel-control-bluetooth-usb-sd-backup-camera-s168064

This all-in-one car radio is running on the advanced Android 6.1 operation system and a powerful quad-core CPU processor. So with this car radio installed in your car, you are able to enjoy a much smoother, faster and easier operation experience.

Thanks to the worldwide real-time GPS navigation system of this unit, you are able to easily and quickly know your current locations and have the suitable route options to reach your desired destinations according to the turn-by-turn directions and voice prompts. And thanks to this car radio’s dual zone function, you can also freely enjoy your favorite music under GPS mode, which won’t have any negative influence on GPS function.

What’s more, under the Bluetooth technology, you can connect your Bluetooth-enabled mobile phone to this unit so as to get access to both Bluetooth hands-free phone calls and Bluetooth streaming music. Therefore, you will have a more convenient and relaxing in-car life.

If you like this unit, just add it to your shopping cart. Good luck to you!

Posted in Uncategorized. Tagged with .

How to upgrade and replace 2006 2007 2008 2009-2011 Honda Civic GPS Navigation Bluetooth Car Radio Touch Screen

If you plan to upgrade your factory radio so as to reduce budget by yourself, it is suggested that you should find a correct installation instruction and follow it to deal with the car radio removal and installation. The following is a 2006 2007 2008 2009-2011 Honda Civic car radio installation instruction. If you own the same or similar dashboard, you can take this instruction as a reference. Wish it is helpful for you to some extent.

2006 2007 2008 2009-2011 Honda Civic Bluetooth GPS Car Radio after installation

2006 2007 2008 2009-2011 Honda Civic Bluetooth GPS Car Radio after installation

Before and during installation, you should notice:

1. Before connecting,please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire,so when replace the fuse, please consult the professional.

7. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2006 2007 2008 2009-2011 Honda Civic car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Pry the cover of the slot below the CD player with a lever and remove it.

Pry the cover of the slot below the CD player with a lever and remove it

Pry the cover of the slot below the CD player with a lever and remove it

3. Remove two screws inside the slot with a ninety-degree screwdriver.

Remove two screws inside the slot with a ninety-degree screwdriver

Remove two screws inside the slot with a ninety-degree screwdriver

4. Pry the lower panel with a lever, loosen it with your hands at the same time, after that, remove the panel.

Pry the lower panel with a lever, loosen it with your hands at the same time, after that, remove the panel

Pry the lower panel with a lever, loosen it with your hands at the same time, after that, remove the panel

5. Remove one screw in the dash.

Remove one screw in the dash

Remove one screw in the dash

6. Remove the vent panel.

Remove the vent panel

Remove the vent panel

7. Unplug the connectors beneath the panel.

Unplug the connectors beneath the panel

Unplug the connectors beneath the panel

8. Pry the edges along the panel of the original radio, then remove it, after that, take the original car radio out of the dash.

Pry the edges along the panel of the original radio, then remove it, after that, take the original car radio out of the dash

Pry the edges along the panel of the original radio, then remove it, after that, take the original car radio out of the dash

9. Unplug the connectors at the back of the original radio.

Unplug the connectors at the back of the original radio

Unplug the connectors at the back of the original radio

9-1

9-1

10. Disconnect the antenna and the other connector on the other side of the original radio.

Disconnect the antenna and the other connector on the other side of the original radio

Disconnect the antenna and the other connector on the other side of the original radio

10-1

10-1

11. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

12. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

13. Connect the Seicane car stereo to your original car radio’s plugs.

14. Put the new Seicane car stereo into the dash.

15. Turn on the new Seicane car stereo and check whether the unit is working properly.

 

Wish you can get some help from the above installation guide. If you have any doubts, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help. Besides, if you still think the installation process is too complicated, you can directly arrange a professional from Seicane to help you. Anyway, before installation, you should select an ideal car radio for your beloved car. If you have no ideas, here I would like to recommend a remarkable 2006 2007 2008 2009-2011 Honda Civic car radio from Seicane to you. Here comes the link, please click:

https://www.seicane.com/hd-touch-screen-android-gps-navigation-radio-for-2006-2011-honda-civic-with-bluetooth-wifi-obd2-usb-audio-aux-1080p-rearview-camera-s0411



Loaded with the advanced and stable Android 6.1 operation system and a powerful quad-core CPU processor, this car radio has greatly enhance its capabilities and performance. So with this car radio, you can gain a much smoother, faster and easier operation experience.

Under the guidance of the turn-by-turn directions and voice prompts provided by the worldwide real-time GPS navigation system of high accuracy, it will be much easier for you to locate where yo are currently and have the most suitable route option to reach your desired destinations.

Additionally, as long as you connect your Bluetooth-enabled mobile phone to this car radio, you are able to get access to Bluetooth hands-free phone calls as well as listen to streaming music for more convenience and enjoyment without taking your hands off the steering wheel.

If you like this unit, just add it to your shopping cart. Good luck!

Posted in Uncategorized. Tagged with .

The Useful Instruction on a 2008 2009 2010 2011-2012 KIA Forte(MT) Bluetooth GPS Car Radio Upgrade

To take your in-car life up a level, what will you do in your car? As far as I am concerned, you can think about removing your factory radio and installing a new aftermarket car radio for your beloved car. The following is a 2008 2009 2010 2011-2012 KIA Forte(MT) car radio installation instruction from Seicane, which can be taken as your reference if you own the same or similar dashboard and you would like to replace your factory radio so as to upgrade your in-car life.

2008 2009 2010 2011-2012 KIA Forte(MT) Bluetooth GPS Car Radio after installation

2008 2009 2010 2011-2012 KIA Forte(MT) Bluetooth GPS Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2008 2009 2010 2011-2012 KIA Forte(MT) car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Pry the left air conditioner vent with a lever, and then remove it.

Pry the left air conditioner vent with a lever, and then remove it

Pry the left air conditioner vent with a lever, and then remove it

3. Pry the right air conditioner vent with a lever, and then remove it.

Pry the right air conditioner vent with a lever, and then remove it

Pry the right air conditioner vent with a lever, and then remove it

4. Unscrew four screws under the a/c vent holding the original car radio with a screwdriver.

Unscrew four screws under the a/c vent holding the original car radio with a screwdriver

Unscrew four screws under the a/c vent holding the original car radio with a screwdriver

5. Gently take the original car radio out of the dash.

Gently take the original car radio out of the dash

Gently take the original car radio out of the dash

6. Disconnect all connectors at the back of the original car radio.

Disconnect all connectors at the back of the original car radio

Disconnect all connectors at the back of the original car radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio ‘s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Please don’t be over worried if you meet any difficulties and don’t know how to overcome them. To overcome these difficulties, you can contact your dealer, communicate with someone experience or seek help from your dealer. If you still think it hard for you to install the new car radio, you can straightly go to a car radio upgrade center and ask a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to select an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is a 2008 2009 2010 2011-2012 KIA Forte(MT) car radio from Seicane. For more details, please click:

https://www.seicane.com/hd-touchscreen-android-radio-gps-navi-for-2008-2012-kia-forte-mt-with-bluetooth-music-wifi-usb-1080p-video-mirror-link-s0491

This all-in-one car radio is running on the advanced and stable Android 6.1 operation system and a high-quality quad-core CPU processor. So this unit can provide you with enhance capabilities and better performance so as to taken your in-car life up a level.

Under the guidance of the turn-by-turn directions and voice prompts provided by the 3D GPS navigation function, you can easily know your current locations and find the best route to get to your desired destinations accurately. Besides, this car radio comes with dual zone function, which enables you to freely listen to your favorite music while navigating.

Additionally, though the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you are able to dial, answer, reject and mute hands-free phone calls as well as listen to Bluetooth streaming music without taking your hands off the steering wheel.

Wish you like this unit and good luck to you!

Posted in Uncategorized. Tagged with .

How to quick remove and upgrade 2007 2008 2009 2010 Toyota OLD Corolla GPS Sat Nav Bluetooth Car Radio

There is no doubt that you may feel tired or bored if you have been driving for a long time, and in that case, you must want to refresh yourself. Under this circumstance, you can listen to your favorite music, watch TV programs or play videos in your car. And your factory radio may not support these entertainment features, so you can consider replacing your factory radio with a new aftermarket car radio. The following is a 2007 2008 2009 2010 Toyota OLD Corolla car radio installation guide from Seicane. If you own the same or similar dashboard, you can refer to it carefully.

2007 2008 2009 2010 Toyota OLD Corolla car radio after installation

2007 2008 2009 2010 Toyota OLD Corolla car radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2007 2008 2009 2010 Toyota OLD Corolla car radio installation guide

1. Remove the bottom panel (air conditioning) with plastic knife.

Remove the bottom panel (air conditioning) with plastic knife

Remove the bottom panel (air conditioning) with plastic knife

1-1

1-1

2. Pry the top of the original car CD panel with plastic knife.

Pry the top of the original car CD panel with plastic knife

Pry the top of the original car CD panel with plastic knife

3. Remove the four screws with a screwdriver.

Remove the four screws with a screwdriver

Remove the four screws with a screwdriver

4. Take the original radio out of the dash.

Take the original radio out of the dash

Take the original radio out of the dash

5. Pull the plug of the original radio.

Pull the plug of the original radio

Pull the plug of the original radio

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

8. Socket docking with the original radio directly, instead of cutting the original plug off.

Socket docking with the original radio directly, instead of cutting the original plug off

Socket docking with the original radio directly, instead of cutting the original plug off

9. Put the original radio plug into our Seicane radio.

Put the original radio plug into our Seicane radio

Put the original radio plug into our Seicane radio

10. Put the new Seicane radio back into the dash.

11. Turn on the new Seicane radio to check if all functions work well. If it doesn’t, please check whether all the cables are connected correctly.

12. Install four screws and panels into their original place.

 

Wish you can learn something useful from the above installation steps. If you come across any problems you don’t know how to deal with, you can seek help from your dealer, someone experienced or a professional. If you still think it hard to install the new car radio, you can directly arrange a professional technician to install the new car radio.

While for the selection of an ideal car radio, if you have no ideas, you can check out the following link which is an amazing 2007 2008 2009 2010 Toyota OLD Corolla car radio from Seicane.

https://www.seicane.com/2007-2008-2009-2010-toyota-old-corolla-android-bluetooth-radio-gps-navigation-head-unit-support-wifi-1080p-video-backup-camera-audio-system-dvr-obd2-s0467

This all-in-one car radio is running on the stable Android 6.1 operation system and a powerful quad-core CPU processor to enhance its capabilities, configuration and performance, so it can be regarded as one of the best replacements for your factory radio. Besides, it also comes with a wide range or practical and entertainment features, mainly including built-in 3D GPS navigation, Bluetooth hands-free phone calls, Bluetooth streaming music, FM/AM radio tuner, file management, USB or SD card connection, etc.

With the assistance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you are able to locate where you are and navigate to your desired destinations. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

What’s more, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you to gain more convenience and enjoyment.

If you like this unit, just add it to your shopping cart.

Posted in Uncategorized. Tagged with .

Top Tutorial for a 2004 2005 2006 2007-2009 Mazda 3 GPS Navigation USB WIFI Car Audio Radio Installation

If you would like to pursue a more comfortable and convenient in-car life, it will be one of the most prevailing ways for you to replace your factory radio with a new aftermarket car radio which comes with a wide range of practical and entertainment features. If you know how to install a new ca rradio, you may find it very easy for you to upgrade a car radio. The following is a 2004 2005 2006 2007-2009 Mazda 3 car radio installation instruction from Seicane. If you own the same or similar dashboard, then you can refer to this instruction carefully.

2004 2005 2006 2007-2009 Mazda 3 Radio after installation

2004 2005 2006 2007-2009 Mazda 3 Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2004 2005 2006 2007-2009 Mazda 3 car radio installation instruction

1. Remove the trim panel with a plastic removal tool.

Remove the trim panel with a plastic removal tool

Remove the trim panel with a plastic removal tool

1-1

1-1

2. Remove two screws that fixed the car radio on the dashboard.

Remove two screws that fixed the car radio on the dashboard

Remove two screws that fixed the car radio on the dashboard

3. Take out the original car radio.

Take out the original car radio

Take out the original car radio

4. Unplug connectors at the back of the original car radio.

Unplug connectors at the back of the original car radio

Unplug connectors at the back of the original car radio

4-1

4-1

5. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

7. Connect the Seicane car radio to your original radio’s plugs.

8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car radio into the dash.

10. Put everything into their original place. All the installation is done.

 

Now do you have a general understanding of the above installation steps? If you meet any problems about either the car radio installation process pr the car radio, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help. You can straightly go to a car radio upgrade center and get the new car radio installed by a professional technician.

Besides, it is especially significant for you to pick an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is an amazing 2004 2005 2006 2007-2009 Mazda 3 car radio from Seicane. For more details, please click:

https://www.seicane.com/android-2004-2009-mazda-3-gps-navigation-car-radio-with-bluetooth-3g-wifi-usb-touch-screen-rearview-camera-mirror-link-obd2-s0477

With this car radio installed in your beloved car, you will definitely embrace a brand new driving experience so as to enjoy more convenience and enjoyment.

Under the guidance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you are able to easily locate where you are and navigate to any locations you would like to go to without getting lost any more.

Additionally, under the wireless Bluetooth technology, you can make your Bluetooth-enabled mobile phone pair with this car radio. By doing so, you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from phone without taking your hands off the steering wheel control.

Wish you like this unit and good luck to you!

Posted in Uncategorized. Tagged with .

The Specific Upgrade Guide for a 2010 2011 2012 2013 Mitsubishi ASX Car Radio GPS Sat Nav Bluetooth Stereo

If you think your factory radio is too outdated to meet your needs in car, you can consider replacing your factory radio with a multifunctional car radio which can support a wide range of practical and entertainment features in your car. If you want to install the new car radio on your own, you can find a step-by-step installation guide to help you. The following is a step-by-step 2010 2011 2012 2013 Mitsubishi ASX car radio installation guide from Seicane, which can be taken as your reference if you have the same or similar dashboard.

2010 2011 2012 2013 Mitsubishi ASX car radio  after installation

2010 2011 2012 2013 Mitsubishi ASX car radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2010 2011 2012 2013 Mitsubishi ASX car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Use a plastic knife to pry the trim panel and remove it.

Use a plastic knife to pry the trim panel and remove it

Use a plastic knife to pry the trim panel and remove it

2-1

2-1

2-2

2-2

3. Remove screws that are holding the radio.

Remove screws that are holding the radio

Remove screws that are holding the radio

4. Take out the original car radio.

Take out the original car radio

Take out the original car radio

5. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio

Disconnect the connectors and cables at the back of the radio

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original stereo’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Wish you can learn some skills from the above installation instruction. If you have any doubts about your car radio or the installation process, please feel free to contact your dealer, communicate with someone experienced or turn o a professional for help.

Besides, to help you effectively select an ideal car radio, here I would like to share an amazing 2010 2011 2012 2013 Mitsubishi ASX car radio from Seicane with you. For more information, you can click:

https://www.seicane.com/inch-android-2010-2013-mitsubishi-asx-radio-gps-navigation-bluetooth-obd2-4g-wifi-steering-wheel-control-backup-camera-mirror-link-16g-flash-cpu-quad-core-s301132

This car radio is running on the stable Android 6.1 operation system and a high-quality CPU processor, which will provide its users a brand new driving experience. Besides, this unit also comes with a lot of practical and entertainment features to meet your different needs in you. Therefore, this car radio can be regarded as one of the best replacements for your old factory radio.

About the practical features, one of the highlights is the high-end GPS navigation system. With the assistance of the high-end 3D GPS navigation system, through the turn-by-turn directions and voice prompts, you can easily know where you are currently and quickly find the right way to reach your ideal destinations.

Besides, you can connect your Bluetooth-enabled mobile phone to this car radio so as to get access to both Bluetooth hands-free phone calls as well as Bluetooth streaming music without taking you hands off the steering wheel ,so you can gain a lot of convenience and enjoyment.

If you like this car radio, please don’t hesitates to add it to your shopping cart right now!

Posted in Uncategorized. Tagged with .