A step-by-step installation guide for a 2007-2013 GMC Acadia car stereo with Mirror Link OBD2 3G WiFi 1024*600 Multi-touch Capacitive Screen

602 views

If you want to upgrade your car capabilities, the easiest and most effective way is to replace your factory radio. To get the most up-to date features, you just need to remove your factory radio and install a new head unit. To install a new head unit, you can find a correct installation guide to help you. The following is a step-by-step installation guide about a 2007-2013 GMC Acadia car stereo from Seicane. If you also have the same dashboard, you can take this installation guide as a reference.

2007-2013 GMC Acadia car stereo after installation

2007-2013 GMC Acadia car stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007-2013 GMC Acadia car stereo installation guide

1.Remove the trim panel by prying the edges with a lever.

Remove the trim panel by prying the edges with a lever

Remove the trim panel by prying the edges with a lever

2.Remove two screws securing the small panel under the factory radio with a screwdriver.

Remove two screws securing the small panel under the factory radio with a screwdriver

Remove two screws securing the small panel under the factory radio with a screwdriver

3.Remove the small panel with your hands.

Remove the small panel with your hands

Remove the small panel with your hands

4.Remove two screws holding another panel in the dashboard. After that, remove the panel with your hands.

4-1. Remove two screws holding another panel in the dashboard. After that, remove the panel with your hands.

4-1. Remove two screws holding another panel in the dashboard. After that, remove the panel with your hands.

4-2. Remove two screws holding another panel in the dashboard. After that, remove the panel with your hands.

4-2. Remove two screws holding another panel in the dashboard. After that, remove the panel with your hands.

5.Unscrew four screws holding the factory radio with a screwdriver.

Unscrew four screws holding the factory radio with a screwdriver

Unscrew four screws holding the factory radio with a screwdriver

6.Take the original radio out of the dashboard with your hands.

Take the original radio out of the dashboard with your hands

Take the original radio out of the dashboard with your hands

7.Disconnect the connectors at the back of the factory radio.

Disconnect the connectors at the back of the factory radio

Disconnect the connectors at the back of the factory radio

8.Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

9.Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

10.Connect the Seicane car stereo to your original car radio ‘s plugs.

11.Put the new Seicane car stereo into the dash.

12.Turn on the new Seicane car stereo and check whether the radio is working properly.

13.Firm all screws and the panels into their original place.

 

With the help of this detailed installation guide, can you install the new 2007-2013 GMC Acadia car stereo on your own? If not, you’ d better ask a professional to help you. You may encounter some questions during the whole process of the installation, then you can consult your dealer. In addition, it’s essential for you to make sure your new car stereo can fit your car. If you have no idea about this, you can take the following intelligent 2007-2013 GMC Acadia car stereo as a reference, please click for more details:

http://www.seicane.com/oem-2007-2013-gmc-yukon-tahoe-acadia-chevy-chevrolet-tahoe-suburban-buick-enclave-android-4-4-4-radio-removal-with-autoradio-gps-navigation-car-a-v-system-1024-600-multi-touch-capacitive-screen-mirror-link-obd2-3g-wifi-k7012

This high-end GMC Acadia car stereo can work well with GMC Acadia from 2007 to 2013 at present. The 1080P large 7 inch touch screen can provide a clearer viewing for you to enjoy all kinds of videos in your car. To get to your desired destination, you can put the latest GPS navigation system into good use for the most accurate direction and voice prompts. To keep safer and more pleasant on the way, you can wirelessly connect with your enabled mobile phone via the bluetooth connection for hands-free calls and music streaming.

To upgrade your factory radio, this multifunctional GMC Acadia car stereo is just your best choice. Just have a great time with it! Good luck!

Related Posts

Posted in Uncategorized.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>