As the improvement of all aspects in life, more and more car owners pay attention to a more comfortable in-car life. To pursue that, can owners can easily upgrade their car radio with a modern head unit which usually can be compatible with most up-to-date features. In order to help you install your new head unit, I’d like to introduce the detailed installation guide about a 2014 MAZDA ATENZA 6 radio from Seicane to you, you can refer to it for the installation of f your new unit.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
2014 MAZDA ATENZA 6 radio installation guide
1·Remove the original console panel with a lever, pry gently along the gap and pick up the panel. Then set it aside.
2·Remove the four screws that fixed the radio on the dashboard. Removing these screws will not be a difficult job.
3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
4·Unplug the connectors.
5·Remove the brackets on both sides of the factory radio. So far the removal of the factory radio is completed. Next steps will move on to the installation of the Seicane radio.
6·Install the brackets on both sides of the Seicane radio.
7·Dock the connectors of the original vehicle and the upgraded car audio.
8·Insert the wires to the appropriate location of the upgraded head radio. If you are not sure about how to wire correctly, you may refer to the wiring diagram for details.
9·Fix the Seicane radio with the four screws.
10·Firm the console panel. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
All in all, you need to make clear every step before you start your job. If you don’t have any experience on how to install a new radio before, then it’s suggested you have a professional for help. If there is any questions during the whole process, you can ask your dealer. However, if you don’t have an ideal car radio, you are recommend to have a careful look at this high quality 2014 MAZDA ATENZA 6 radio from Seicane, which is a great choice for you to upgrade your factory radio to high configurations. Please click:
This intelligent MAZDA ATENZA 6 radio comes with an amazing 10 inch 1024*600 multi-touch screen while you are heading to your desired destination with the turn-by-turn direction and voice prompts. It also comes with bluetooth technology for you to wirelessly pair with your enabled cell phone for hands-free calls so as to have a safe and pleasant journey.
Wish you like this popular MAZDA ATENZA 6 radio and have a wonderful time with it on all your way to a lot of locations! Good luck to you!