http://www.carstereofaqs.com/wp-admin/edit.php?post_type=custom-css-js

A detailed installation guide for a 2011-2014 Hyundai Grandeur HG dvd player gps Bluetooth support OBD2 TV 1080P Video

271 views

You must be tired or bored after staying in car for a long time. Whether you are a driver or a passenger, you both need to refresh yourself. So you need to install a new aftermarket car stereo which comes with a lot of practical entertainment features. Since the installation of a car stereo requires not much professional skills, so that you can achieve it by yourself with a correct installation guide. If you are a car owner of a 2011-2014 Hyundai Grandeur HG dvd player gps Bluetooth, you can read this instruction carefully to make clear every step before you start it.

2011-2014 Hyundai Grandeur HG dvd player gps Bluetooth after installation

2011-2014 Hyundai Grandeur HG dvd player gps Bluetooth after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2011-2014 Hyundai Grandeur HG car stereo installation guide

1.Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2.Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3.Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4.Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6.Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7.If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8.Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Now can you finish all the installation steps with this correct installation guide? If not, you can give some details to your dealer so as to ask for help. Or if you still think it too hard for you to succeed in the car stereo installation, you can directly ask a professional to help you install it. Anyway, before the installation, please make sure your new car stereo is compatible with your car. If not, it won’t make sense. To help you find a suitable car stereo , you may refer to the link below which is about a remarkable 2011-2014 Hyundai Grandeur HG dvd player gps Bluetooth with DVD player from Seicane. Please click:

http://www.seicane.com/8-pulgadas-2011-2014-hyundai-grandeur-hg-mercado-de-accesorios-android-radio-sistema-de-navegacion-gps-con-reproductor-dvd-hd-1024-600-pantalla-tactil-obd2-dvr-vision-trasera-camara-tv-1080p-video-bluetooth-3g-wifi-control-del-volante-usb-sd-vinculo

Not only with a great interface but also a wide range of features, this multifunctional 2011-2014 Hyundai Grandeur HG dvd player gps Bluetooth can be one of your replacement for your factory radio. The Bluetooth technology makes it possible for you to make, receive or reject phone calls and enjoy Bluetooth music if you link your cell phone with this unit. Thanks to the powerful 3D GPS navigation system of high accuracy, you are able to be guided to anywhere you’d like to go. Besides, one thing should arise up your attention, that is, the steering wheel still remains its original functions after the car stereo installation.

Related Posts

Posted in Uncategorized. Tagged with .

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>