It has become a trend for car owners to replace the factory radio with an aftermarket head unit which can offer the 3D GPS navigation as well as entertainment enjoyment at the same time while driving. Some of you may think it too hard to install a new head unit. Actually, it’s not too difficult if you have the correct installation instruction. If you own a 2007 2008 2009 Mercury Mountaine and want to upgrade your radio, you can read this 2007 2008 2009 Mercury Mountaine head unit installation instruction from Seicane carefully.
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2007 2008 2009 Mercury Mountaine head unit installation guide
Step 1: Remove the trim around gear shifter.
Step 2: Remove screws securing center console lid with a screwdriver.
Step 3: Remove the center console trim.
Step 4: Remove console side panels on both driver and passenger sides.
Step 5: Remove bolts securing radio bezel and AC controls.
Step 6: Unplug AC controls (from passenger side).
Step 7: Remove the radio bezel and AC controls.
Step 8: Remove screws securing radio to the vehicle, and take the original radio out of the dash.
Step 9: Check all the accessories for the new Seicane head unit.
Step 10: Connect the harnesses to the back of the new Seicane head unit.
Step 11: Connect the Seicane head unit to your original car radio ‘s plugs, and put the new Seicane head unit into the dash.
Step 12: Turn on the new Seicane head unit and check whether the radio is working properly.
Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.
Wish the above installation instruction for the 2007 2008 2009 Mercury Mountaine head unit can be helpful for you. If there is any question, you can seek help from your dealer. If it’s the first time for you to install a new unit, you’d better ask a professional for help. Please make sure you have a comprehensive understanding before you start to install your new head unit.
Do you find a suitable head unit which can fit your car without any gap? If not, I’d like to recommend a wonderful 2007 2008 2009 Mercury Mountaine head unit from Seicane to you. It comes with the humanizing operation interface for you to upgrade your factory radio. For more details, you are welcome to click:
This multifunctional Mercury Mountaine head unit is the ideal replacement for you to upgrade your factory radio in your car. To easily reach your destination, you can turn on the GPS navigation system for text-to-speech guidance and voice prompts. The bluetooth technology to support hands-free calls and music streaming is included for you. Your steering wheel control can still work after installation. Wish you like it and have amazing fun with it. Good luck!